- Out-of-Stock
ODROID-XU Lite - Development platform powered by Exynos5 Octa Cortex™-A15 1.4Ghz quad core and Cortex™-A7 quad core CPUs
The world’s first big.LITTLE architecture based bare-board computer.
The only difference from the original ODROID-XU is the maximum clock of A15 cores.
The XU Lite is 1.4Ghz while the orginal XU has 1.6Ghz
Other features are exactly same.
Note!! The basic package includes a XU board, a plastic case, an active cooler and 5V/4A PSU. You need additional MicroSD card or an eMMC module to install the OS. We strongly recommend eMMC module for much higher performance boosting.
SPECIFICATIONS
| Processor | Samsung Exynos5 Octa ARM Cortex™-A15 Quad 1.4Ghz and Cortex™-A7 Quad 1.2GHz CPUs |
| Memory | 2Gbyte LPDDR3 RAM PoP (800Mhz, 1600Mbps/pin, 2 x 32bit Bus) |
| 3D Accelerator | PowerVR SGX544MP3 GPU (OpenGL ES 2.0, OpenGL ES 1.1 and OpenCL 1.1 EP) |
| Video | supports 1080p via HDMI cable(H.264+AAC based MP4 container format) |
| Video Out | micro HDMI connector |
| Audio | On-board Audio codec Standard 3.5mm headphone jack HDMI Digital |
| USB3.0 Host | SuperSpeed USB standard A type connector x 1 port |
| USB3.0 OTG | SuperSpeed USB Micro A-B type connector x 1 port |
| USB2.0 Host | High Speed standard A type connector x 4 ports |
| Display | HDMI monitor |
| Storage (Option) | MicroSD Card Slot eMMC module socket : eMMC 4.5 Flash Storage (up to 64GByte capacity and 160MByte/sec access speed) |
| Fast Ethernet LAN | 10/100Mbps Ethernet with RJ-45 Jack ( Auto-MDIX support) |
| Gigabit Ethernet LAN(Option) | USB3.0 to Gigabit Ethernet adapter (USB module) |
| WiFi (Option) | USB IEEE 802.11b/g/n 1T1R WLAN with Antenna (USB module) |
| HDD/SSD SATA interface (Optional) | SuperSpeed USB (USB 3.0) to Serial ATA3 adapter for 2.5"/3.5" HDD and SSD storage |
| Power (included) | 5V 4A Power |
| System Software | u-boot 2012.7, Kernel 3.4.x, Android 4.2.x Source code will be uploaded on download page after first shipment. Linux BSP will be supported Q4 2013. |
| Case(included) | Mechanical case & cooler (98 x 74 x 29 mm approx. ) |
| PCB Size | 94 x 70 x 18 mm approx. |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
USB cable (type A) - microUSB (type B) used to connect the computer with devices equipped with microUSB-B sockets. Length: 1m
USB-UART converter for Odroid minicomputers. It is based on the CP2102N chip and is equipped with a USB type C connector
The cable allows for transmitting image and sound from micro HDMI devices to HDMI screens, offering high transmission quality thanks to HDMI 1.4 technology and is 1.5 m long. Akyga AK-HD-15R
Jetson Mate motherboard for NVIDIA Jetson Nano and Jetson Xavier NX. It allows you to connect 4 SoM modules and create a home GPU computing cluster or server. Seeed Studio 114992562
No product available!
ToF distance sensor (Time of flight) with a range of up to 2.5 m. The module is powered with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SPX-17716
No product available!
RFID antenna designed for UHF RFID tags. It allows you to increase the effective range of tags to about 2.5 cm. SparkFun SPX-15113
No product available!
OLED display with a diagonal of 0.91" and a resolution of 128x32 pixels. It is equipped with Qwiic connectors and communicates via the I2C interface. SparkFun LCD-17153
No product available!
Starter kit with RedBoard development board and Qwiic modules: IMU, environmental sensor, GPS module, joystick, accelerometer, keyboard and proximity sensor, MP3 player, relay and OLED display. SparkFun KIT-16262
No product available!
QLED IPS 9" display with a touch screen and Quantum Dot technology. The display is equipped with an HDMI interface for image display and USB for the touch panel. Resolution 1280x720 pixels. Waveshare 9HP-CAPQLED
No product available!
QLED IPS 10.1" display with a touch screen and Quantum Dot technology. The display is equipped with an HDMI interface for image display and USB to the touch panel. Resolution 1280x720 pixels. Waveshare 10.1HP-CAPQLED
No product available!
Industrial DTU 4G module with Qualcomm SIM7600E-H chip. It allows you to connect industrial modules with serial communication via RS232, RS485 or TTL interfaces with 4G networks. Waveshare SIM7600E-H 4G DTU (EU)
No product available!
The power module is designed to work with solar panels. It is compatible with panels with an output voltage from 6 V to 24 V. It has a built-in 3.7 V lithium-ion battery with a capacity of 10 Ah. Waveshare Solar Power Manager (B)
No product available!
Improved version of the official HAT module, designed to power Raspberry Pi 4 and Raspberry Pi 3B + via Ethernet (PoE) cable. The use of the module eliminates the need for a separate power supply and reduces the number of cables needed. Raspberry Pi SC0468
No product available!
Cable with USB plugs type A and microUSB type B 2.0, cable length 3 m. LANBERG CA-USBM-10CC-0030-BK
No product available!
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 3200 mAh. Akyga AKY0926
No product available!
Size XS antistatic ESD safety gloves. Made of nylon fiber, they enable precise handling of objects and feeling of small elements
No product available!
Module with ACHS-7121 current sensor with a measuring range of direct and alternating current from -10 to 10 A. It communicates via an analog interface. Pololu 4030
No product available!
Development kit with RP2040 microcontroller, Bluetooth 5.0 module, QVGA camera, LCD display, IMU chip and microphone. ArduCAM B0330
No product available!
Logic module LOGO! 12/24RCEO with Ethernet interface and WEB server. It has a 400-block memory and a data logging function on the microSD card, it has no display. Siemens 6ED1052-2MD08-0BA1
No product available!
Development platform powered by Exynos5 Octa Cortex™-A15 1.4Ghz quad core and Cortex™-A7 quad core CPUs