- Out-of-Stock

Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Transparent Gray
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
![]() |
Dagu Rover 5 chassis with Orangutan SVP robot controller and additional electronics mounted to an RP5/Rover 5 expansion plate (narrow). |
---|
![]() |
Two RP5/Rover 5 expansion plates with an Orangutan SV-328 and an Arduino Duemilanove. |
---|
![]() |
Pololu RP5/Rover 5 wide expansion plate with a TReX Jr. and an RC receiver. |
---|
![]() |
A narrow RP5/Rover 5 expansion plate with an Orangutan SV-328 and a Sharp digital distance sensor. |
---|
This 1/8" acrylic expansion plate lets you mount a variety of components to your Rover 5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components. The slot size and spacing is compatible with the many Tamiya mechanical sets that have 3 mm holes spaced 5 mm apart. Included with the plate are four tapping screws for mounting the plate to the Rover 5 tracked chassis.
These plates were originally designed for our now-discontinued RP5 chassis, but they are also compatible with the Dagu Rover 5. However, we have noticed a misalignment between the mounting holes on the expansion plate and the Rover 5, so you might only be able to secure the plate with two screws on opposing corners. These plates can also be used on their own as chassis for custom-built robots.
The Pololu RP5/Rover 5 expansion plate comes in both narrow and wide versions. The narrow plate (RRC07A) is 6.8" x 3.1" (17.2 x 8.0 cm) and covers the main plastic housing of the Rover 5 chassis. The wide plate (RRC07B) is 6.8" x 5.0" (17.2 x 12.7 cm).
Both the narrow and wide expansion plates are available in a variety of colored (and clear) acrylics:
![]() |
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Transparent Gray |
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
No product available!
A set for building a smartwatch based on the micro: bit educational module. It consists of an expansion board and a strap and micro:bit module
No product available!
Dosing needle for precise application of glue, flux with an inner diameter of 0.25 mm and an external diameter of 0.51 mm
No product available!
No product available!
Raspberry Pi 2 and Pi 1 model B+ Enclosure - Black
No product available!
Webduino Smart is a ground-breaking development board which can function with the Internet and WebSocket independantly. It will be a path to lead an efficient and effective development of IoT
No product available!
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3 and XU4. Ready to run out of box 8Gbyte eMMC Version 5.0 interface from Toshiba
No product available!
No product available!
POWER BANK 10,000 mAh with M-LIFE start-up cables (clamps)
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Transparent Gray