- Out-of-Stock

Turnigy nano-tech 5000mah 2S 25~50C Lipo Pack (11934)
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec.Capacity: 5000mAhVoltage: 2S1P / 2 Cell / 7.4VDischarge: 25C Constant / 50C BurstWeight:279g (including wire, plug & case)Dimensions: 173x49x16mmBalance Plug: JST-XHDischarge Plug: 4mm bullet-connector * The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly. Advantages over traditional Lipo batteries.Power density reaches 7.5 kw/kg.Less Voltage sag during high rate discharge, giving more power under load.Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.Greater thermal control, pack usually doesnt exceed 60degCThickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.Higher capacity during heavy discharge. More than 90% at 100% C rate.Fast charge capable, up to 15C on some batteries.Longer Cycle Life, almost double that of standard lipoly technology.
PRODUCT ID: N5000.2S.25
Data sheet
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Li-Po battery with a rated voltage of 3.7 V and a capacity of 4000 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP805080
STM32 Nucleo starter pack for LoRa technology. It consists of two development kits: NUCLEO-L073RZ and NUCLEO-F746ZG and expansion modules for communication within LoRa: I-NUCLEO-LRWAN1 and LRWAN_GS_HF1. STMicroelectronics P-NUCLEO-LRWAN2
No product available!
No product available!
Mounted controller - timer with 8 relays. AVT5588 C
No product available!
No product available!
No product available!
No product available!
Permanent cylindrical neodymium magnet with a diameter of 8 mm and a height of 3 mm.
No product available!
UNIVERSAL OUTPUT CARD WITH RS485 INTERFACE AND AVR MICROCONTROLLER - PLATE AND CONTROLLED LAYOUT
No product available!
Angular socket JST XH cable-plate, male, 2 pins, pitch 2,5mm, THT, 250V, 3A, ROHS
No product available!
No product available!
FiberFlex 30D filament in Black with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy FiberFlex 30D Black
No product available!
No product available!
No product available!
Orange Pi One H3 Quad-core Support Ubuntu Linux And Android Mini PC
No product available!
The assembled interface with the FT5557D chip. AVT5557 C
No product available!
No product available!
HK Turnigy nano-tech 5000mah 2S 25~50C Lipo Pack (11934)