DS100B - RS232 / 422/485-Eth10 converter

Description

DS100 is a device server with serial serial interface (SDS), which as an external converter enables the connection of any device equipped with serial interface to Ethernet (TCP / IP). The converter has a compact, aesthetic housing. The converter is connected to the serial interface by means of the DB9M plug, and the interface type (RS232 / 422/485) is selected using the DIP switch.

The EM100 module was used for the converter construction.

Characteristics of the DS100 module:

• Aesthetic housing with small dimensions 89x51x30mm, Power supply: 12 VDC @ approx. 80 mA, Port
• Ethernet 10BaseT, Serial port:
  • RS232: RX, TX, RTS, CTS, DTR, DSR
  • RS422: TX +/-, RX +/-, RTS +/-, CTS +/-
  • RS485: TX +/-, RX +/-
• The RTS, CTS, DTR and DSR lines can be used as remotely controlled I / O lines
• Status information is displayed using 4 LEDs
• Two internal transmission buffers of 510 bytes
• Built-in EEPROM configuration memory
• Support for network protocols, including UDP, TCP, ARP, ICMP (PING) and DHCP
• Configuration of the converter can be done either through a serial port or through a network (using the IP address)
• A set of commands controlling the serial port, network connection, remote status monitoring, etc.
• Firmware upgrade via serial port or via network
• Supplied with the Device Server Toolkit (DST) for Windows software and with the Virtual Serial Port Driver (VSPD) (a program that redirects the COM port)
• A version of VSPD for Linux is available
• Operated by TIBBO.NET (program integrating the distributed system in the network)
• CE and FCC certification

Included

• DS100B module