- Out-of-Stock
KEMOT KT33 universal meter
ID: 233220
Universal meter KEMOT KT33, Kemot
Universal meter KEMOT KT33, Kemot
Functions:
- DC and AC voltage measurement
- DC current measurement
- resistance measurement
- measurement of diode conduction voltage and circuit continuity
Technical parameters:
- illuminated crystal display (3 1/2 digits), dimension: 16x48mm
- maximum values of measured voltage: 500V DC, 500V AC (effective value)
- number of readings: 2-3 reads per second
- operating temperature range: 0 ° C - 40 ° C
- storage temperature range: -10 ° C - + 50 ° C
- power supply: 9V 6F22 battery
- power consumption: about 1mA
233220
Data sheet
- Upper DC voltage range
- 200mV/2V/20V/200V/500V
- Upper AC voltage range
- 200V/500V
- Upper DC current range
- 200μA/2mA/20mA/200mA/10A
- Upper AC current range
- No
- Upper resistance range
- 200Ω/2kΩ/20kΩ/200kΩ/20MΩ/200MΩ
- Upper capacitance range
- No
- Frequency range
- No
- Temperature measurement
- No
- Range adjustment
- Manually
- True RMS
- No
- Hold function
- Yes
- Continuity tester
- Yes
- Diode tester
- Yes
- Transistor hFE measurement
- Yes
- Buzzer
- Yes
- Battery indicator
- Yes
- Automatic shut-off
- No
- Display backlight
- Yes
- Battery type
- 6F22
- Length
- 130 mm
- Width
- 75 mm
- Thickness
- 35mm
- Weight
- 156 g
Manufacturer Lechpol Electronics Leszek Spółka komandytowa Garwolińska 1 08-400 Miętne Poland sprzedaz@lechpol.pl
Responsible person Lechpol Electronics Leszek Spółka komandytowa Garwolińska 1 08-400 Miętne Poland sprzedaz@lechpol.pl
Other products in the same category (16)
Side panel with sensors for Totem Mini Lab and Totem Micro Lab sets. The board has a microphone, OLED display, DH11 humidity sensor, NTC thermistor, buzzer and a DC motor control module. Totem TE-SP02-B
Retired
No product available!
Side panel with audio elements for Totem Mini Lab and Totem Micro Lab sets. The board has an audio amplifier with a loudspeaker, a VU indicator, a function generator and a pi filter circuit. Totem TE-SP03-B
Retired
No product available!
A set for building a fighting robot controlled by a mobile application for a smartphone or tablet. Totem TRK-MT1G
Retired
No product available!
A set for the construction of two fighting robots (green and yellow) controlled by a mobile application for a smartphone or tablet. Totem TRK-MT2
Retired
No product available!
A kit for building a four-wheeled platform controlled by a mobile application. TMK-4WDU totem
Retired
No product available!
A set for building a 6-legged walking robot controlled by a mobile application. Totem TKR-LDB
Retired
No product available!
Kit for building a dog robot controlled by a wire with a switch. Totem TKR-DG
Retired
No product available!
Kit for building a giraffe robot controlled by a wire with a switch. Totem TKR-GRF
Retired
No product available!
Kit for building a dinosaur robot controlled by a wire with a switch. Totem TKR-TRX
Retired
No product available!
A set for building a walking robot controlled by a mobile application. Totem TKR-LSP
Retired
No product available!
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 9 V or 12 V and testing chargers. PDC005
Retired
No product available!
Camera module with a resolution of 13 MP equipped with an image sensor AR1335. It is equipped with a FoV 50° lens with an M12 mount. Designed for Raspberry Pi and Jetson Nano. ArduCAM B0277
Retired
No product available!
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. Totem TE-X4-KIT1
Retired
No product available!
Thermally conductive tape used as a replacement for thermally conductive paste. They are very flexible and characterized by high compressibility. AG Termopasty ART.AGT-161
Retired
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 1350 mAh, equipped with a PCM protection and a 1.5 JST-ZH connector. Akyga LP503758
Retired
No product available!
Module with a 3-axis MMA8452Q accelerometer. The system has a configurable measurement scale of ±2g/±4g/±8g. It is supplied with the voltage from 1.95 to 3.3 V and communicates via the I2C interface. SparkFun SEN-12756
Retired
No product available!
Universal meter KEMOT KT33, Kemot