MY-ZB010C-S UART to ZigBee Module

MY-ZB010C-S UART to ZigBee Module

The MY-ZB010C is an industrial UART to ZigBee module designed by MYIR for applications which require low cost, low power, high reliability and far distance wireless communication network. It is a ZigBee/IEEE 802.15.4 compliant solution operating within the 2.4GHz ISM band. The module offers AT command line to configure parameters and implement point-to-point, peer-to-peer, point-to-multipoint, and mesh network topologies. It also has fixed time AD acquisition, IO acquisition, IO level pass-through control, PWM output and more other functions to make it an ideal communication module for applied fields like smart home, smart energy, remote monitoring, medical monitoring, warehouse environment monitoring and building automation.

The MY-ZB010C UART to ZigBee Module is available in two models: MY-ZB010C-S and MY-ZB010C-P. The MY-ZB010C-S is a standard power module with 2.5dBm transmit power, -95dBm receiving sensitivity and integral antenna. The MY-ZB010C-P is a high power module with 22dBm transmit power, -100dBm receiving sensitivity and UFL antenna interface. User can make selection according to their application requirements.

	MY-ZB010C-S ZigBee Module
	MY-ZB010C-P ZigBee Module

The MY-ZB010C ZigBee module is small in size and easily for customers to embed it into their products to add powerful network capabilities. MYIR also offers ZigBee module custom design services covering below contents:

• Transmit the ZigBee module connected data to data center in a special format.
• When the ZigBee module has received the specific data, to perform certain actions such as IO control, PWM output, etc.
• If the customer requires more perfect and powerful functions, we can customize your project according to your requirement. MYIR has much experience on ZigBee development which will help customers with complete solution.

Features

• Small form factor with 30mm (L) x 16mm (W) x 3mm (H) PCB dimensions
• Stamp hole interface for board-to-board connections (27-pins)
• Industrial working temperature: -40°C to +85°C.
• Wide supply voltage range: 2.1V to 3.6V
• Low cost, low power and high reliability network
• Two antenna options:
  • On-board integrated antenna for MY-ZB010C-S
  • Hirose U.FL coaxial connector external antenna for MY-ZB010C-P
• ZigBee/IEEE 802.15.4 compatible network solution
• 2.4GHz ISM band for using globally
• 16 channels (802.15.4 Channel 11-26)
• Supports point-to-point, peer-to-peer, point-to-multipoint, and mesh network topologies
• TTL UART interface (can be used with only VCC, GNC, TXD and RXD four signals)
• Rich peripherals with 4 x AD, 5 x IO, 3 x PWM
• Watchdog design to ensure the stability of the system
• Ready-to-use out-of-the-box and AT commands are offered for control and configuration

Item		MY-ZB010C-S	MY-ZB010C-P
Network Protocol		IEEE 802.15.4 ZigBee Pro (ZigBee 2007)
Frequency Channel		ISM 2.4GHz band, Channel 11-26
Network Topologies		Peer-to-peer, point-to-multipoint, Mesh
Over-the-air data rate		250Kbps
Actual usable data rate		29.6Kbps
Transmit Power		2.5dBm	22dBm
Receiver Sensitivity		-95dBm	-100dBm
Antenna		Integral antenna	uFl connector
UART Interface		Baud rate: 4800, 9600, 19200, 38400, 76800, 115200 Data bit: 5, 6, 7, 8 Parity bit: none, odd, even Stop bit: 1, 2 Flow control: none, hardware Voltage: 3.3V, TTL
Footprint		Stamp hole
Recommended voltage		DC 3.3V
Operating voltage		2.0V ~ 3.6V
Current	Operating Current (Transmit)	15.3mA	175mA
	Operating Current (Receive)	17mA	22mA
	Power-down Current	8mA	10mA
AD	Accuracy	10 bit
	Reference voltage	DC 2.47V
	Input voltage range	0V ~ 2.47V
PWM	Output Maximum Frequency	10KHz
	Output Minimum Frequency	5Hz
Temperature	Operating Temp.	-40°C to +85°C.
	Storage Temp.	-40°C to +125°C.
	Soldering Temp.	280°C to +320°C.
Dimensions		30mm (L) x 16mm (W) x 3mm (W)
Weight		About 3g

Download

• Schematic
  
• MY-ZB010C Evaluation Board Quick Start
  
• MY-ZB010C Module Overview
  
• MY-ZB010C Module user manual
  
• Configuration Software