- Out-of-Stock
Raspberry Pi 2 and Pi 1 model B+ Enclosure - White
ID: 234720
Raspberry Pi 2 and Pi 1 model B+ Enclosure - White
Raspberry Pi 2 and Pi 1 model B+ Enclosure - White
Features
This stylish case complements the Raspberry Pi 2 and Raspberry Pi 1 model B+ computers and has many design features intended to utilise the wide capabilities of the Raspberry Pi.
- Two piece construction, base and cover, moulded in a lightly textured ABS plastic
- Cover featurestwomountingpositionsforthecamera,oneinternally(fixedwithsuppliedscrews)orfittedtotopofcasein purpose designed mounting slot. Cover also features cable access slots for the camera and screen ribbon cables
- Base has side clips which positively locate the Raspberry Pi B+ board into position allowing it to be operated with or withoutthecoverinplace(givingeasyaccesstotheGPIOandotherconnectors)
- Base comes with four rubber feet and also features two screw slots to allow the enclosure to be vertically mounted
- Cover can be easily removed without the need to unplug key cables
- The cover features access holes to allow viewing of the operation LED’s
- Ventedbasetoallowthroughairflow
- Available in Black, Transparent and White
Product Code: RPI-ENC02-WHT B+
234720
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Raspberry Pi 1 model B + is a popular single board computer with Broadcom BCM2835 processor (700MHz, ARM1176JZF-S core) and 512 MB RAM. The computer runs under Linux (eg Raspbian). There are, among others, 4 USB ports, HDMI connector, camera connector
zł185.41
24h
Available quantity: 11
Available
Other products in the same category (16)
No product available!
The module contains an input for SD cards and MicroSD cards. Waveshare SD Storage Board
Retired
No product available!
264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface
Retired
No product available!
Waveshare AlphaBot, a basic set for building an Arduino-based robot
Retired
No product available!
IMU inertial sensor, 10-axis, barometer with temperature compensation, low energy consumption
Retired
No product available!
The Open746I-C development board has been designed for the capabilities of the STM32F746IGT6 microcontroller, includes a motherboard and a Core746I microcontroller board. Waveshare Open746I-C Package B
Retired
No product available!
640x384, 7.5inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface
Retired
No product available!
640x384, 7.5inch E-Ink raw display, three-color, SPI interface, without PCB
Delivery date unknown
No product available!
264x176, 2.7inch E-Ink raw display, three-color, SPI interface, without PCB
Retired
No product available!
No product available!
Two-channel DC motor controller for DC motors or one step motor control, built on the L293D circuit with additional ESD protection
Retired
No product available!
TFT color display module 2,2 "320 x 240 pixels with touch panel. Wavehare 2.2inch 320x240 Touch LCD (A)
Retired
No product available!
Waveshare AlphaBot, a development kit for building an Arduino-based robot
Retired
No product available!
HDMI 4.3 "480 x 272 pixel color LCD module with touch panel for Raspberry Pi
Retired
No product available!
UBox NEO-6M UART GPS module with active antenna, EEPROM memory, battery for maintaining settings and hot start functions
Retired
No product available!
5 MPx camera module for Raspberry Pi OV5647 with CSI interface
Retired
No product available!
Raspberry Pi 2 and Pi 1 model B+ Enclosure - White