- Out-of-Stock
SOIC adapter, SO-08, SO-20
ID: 557575
The SOIC adapter is used for testing circuits in SMD enclosures. The place for the stabilizer enables the selection of the supply voltage, as well as the supply of additional modules. The module is equipped with a filtering capacitor and space for a polymer fuse. MOD-14.Z
SOIC adapter, SO-08, SO-20
Description
Presented SOIC adapter, from SO-08 to SO-20 can be used for testing systems in SMD enclosures. The place for the stabilizer enables the selection of the supply voltage, as well as the supply of additional modules. The built-in LED indicates power. The module also contains a filter capacitor and a place for a polymer fuse - as a short circuit protection.
The module can be used as a 2 SO-08 adapter.
Technical data:
- Code and name of the module: MOD-14 Adapter SOIC, SO-08, SO-20
- Integrated circuit: space for integrated circuit in SO housing from 8 to 20 leads
- Power: up to +12 V
- LED signaling: yes
- Dimensions: 28 mm x 18 mm
- Additional information:
- derived voltage from the stabilizer
- built-in stabilizer (+5 V, other voltage value on request)
- RoHS: yes
Set contains:
- assembled MOD-14.Z Adapter SO-08/20 with stabilizer
- set of connectors for self-assembly (11-pin 2 pcs)
557575
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
The two-channel DDS signal generator supports a frequency range of up to 15MHz with a precision of up to 0.01uHz and DDS technology ensures signal stability. The device offers 12-bit vertical resolution, 1mV amplitude resolution and 50Ω output impedance. Junctek JDS6600-15
Retired
No product available!
A two-channel DDS signal generator with a range of up to 40MHz ensures precise signal generation thanks to DDS technology with an accuracy of 0.01uHz. The device offers 12-bit vertical resolution, 1mV amplitude resolution and 50Ω output impedance, making it irreplaceable in electronics laboratories. Junctek JDS6600-40
Retired
No product available!
The two-channel DDS signal generator with a frequency of 60MHz enables the generation of various waveforms, from a sine wave with a range of up to 60MHz to a pulse wave with a range of up to 6MHz. The device is distinguished by a precise frequency resolution of 0.01uHz, stability of 1ppm/3h and 12-bit waveform resolution. Junctek JDS6600-60
Retired
No product available!
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 4.4 GHz. Equipped with an LCD display, it can be connected to a computer via USB. Nanovna V2 4"
Retired
No product available!
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. NanoV2 3.2"
Retired
No product available!
SDR (Software Defined Radio) receiver that allows you to receive signals in the frequency range from 10 kHz to 1 GHz. It is ideal for both monitoring low frequencies and receiving signals on higher bands
Retired
No product available!
Thermal imaging camera module with an MLX90640 infrared sensor and a 2.8" TFT LCD display. It offers an accuracy of 2°C and a viewing angle of 55°x35°.
Retired
No product available!
Antenna dedicated to communication in LoRa networks in the 868 MHz frequency band. Equipped with an RP-SMA connector. SparkFun WRL-18083
Retired
No product available!
Visible spectrum emitter module that combines 9 discrete LEDs covering visible light wavelengths from 455 to 720 nm. It uses Qwiic connectors and I2C communication as well as a USB type C socket to power the module. SparkFun SPX-21316
Retired
No product available!
WM8960 stereo codec module with driver for 1W class D speakers and headphones. It uses the I2S interface and the I2C bus to configure the system. SparkFun BOB-21250
Retired
No product available!
MP3 player module controlled by I2C interface or switching inputs. It is based on a 1.4 W audio amplifier. The board has a 3.5 mm audio output and a connector for connecting a loudspeaker. Files are played from a microSD card. SparkFun DEV-19030
Retired
No product available!
A set with an adapter dedicated to the FLIR Lepton thermal imaging camera and the Lepton FS camera. It has been pre-configured to operate as a plug-and-play UVC 1.0 USB camera, it can also communicate via UART and I2C interface. SparkFun DEV-20813
Retired
No product available!
Motion detection module featuring Panasonic\'s EKM series PIR sensor. The EKM series is optimised for detecting small movements and is ideal for detecting movement in a small area around the sensor. It offers digital output in 32 zones with a detection distance of 5 m and a detection area of 90° x 90°. SparkFun SEN-22000
Retired
No product available!
Antenna dedicated to communication in LoRa networks in the 868 MHz frequency band. Equipped with an RP-SMA connector. SparkFun WRL-18082
Retired
No product available!
Sensor module for electromyography (EMG). Allows muscle activity to be studied and used to control devices. SparkFun DEV-21265
Retired
No product available!
Portable soldering iron with a power of 65 W. It has an adjustable operating temperature in the range of 50 ° C to 400 ° C. It can be powered via a DC or USB type C connector. The set includes a soldering iron and a BC2 tip. MiniWare TS101 (BC2) Blue
Retired
No product available!
The SOIC adapter is used for testing circuits in SMD enclosures. The place for the stabilizer enables the selection of the supply voltage, as well as the supply of additional modules. The module is equipped with a filtering capacitor and space for a polymer fuse. MOD-14.Z