- Out-of-Stock
The Particle Photon is an IoT module (Internet of Things), it contains everything you need to build a device that communicates with the Internet. The Particle Photon contains a powerful microcontroller with an ARM Cortex-M3 (120 MHz) core and a Broadcom WiFi module. The soldered connectors (2.54 mm pitch) allow easy use of the module with contact plates.
Photon is not only efficient but also easy to use. Small size means that Photon is ideal for creating IoT devices, in addition you get the opportunity to use free Particle Cloud.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
IoT development board the size of Arduino, equipped with an ARM Cortex-M3 processor (STM32F205) and a Wi-Fi communication module (with an integrated antenna and uFL connector). SparkFun DEV-13321
Module with pressure, humidity and temperature sensor. It uses the I2C interface and allows the connection of additional wind sensors via the RJ11 connector. SparkFun DEV-13674
No product available!
Module with 9DoF LSM9DS1 sensor (3-axis accelerometer, 3-axis magnetometer, 3-axis gyroscope). It has a derived I2C interface and is supplied with the voltage of 3.3 V. SparkFun DEV-13629
Photon Micro OLED Shield breaks out a small monochrome, blue-on-black OLED to use with your Photon module. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. DEV-13628
The power module is equipped with a LiPo battery charging system. It allows you to power the board with a battery and create a portable IoT device. SparkFun DEV-13626
Particle’s IoT (Internet of Things) hardware development kit, the Photon, provides everything you need to build a connected project. Particle has combined a powerful 120Mhz ARM Cortex M3 micro-controller with a Broadcom Wi-Fi chip in a tiny thumbnail-sized module called the PØ (P-Zero)
Prototype board designed to cooperate with Particle Photon. The board has prototype holes with a 2.54 mm pitch and pins of the I2C interface. SparkFun DEV-13598
Non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). TOL-10950
No product available!
Battery: Li-Po; 3.7V; 2000mAh; Outputs: wires with 2-pin JST-PH connector; 5.8 mm x 54 x 60 mm. PRT-08483
No product available!
This gearmotor consists of a high-power, 12 V brushed DC motor combined with a 9.68:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 464.64 counts per revolution of the gearbox’s output shaft.
No product available!
No product available!
Open-source single-board computer (SBC), can run Android 4.2, Android 4.4*, Ubuntu, Debian, Fedora, Raspbian, ArchLinux, openSUSE, OpenWrt, Bananian, and other Linux OS systems such as Gentoo and Fedora. It uses the AllWinner A20 SoC, and has 1GB DDR3 SDRAM with wired Gigabit ethernet (RJ45 socket) and a SATA port
No product available!
No product available!
COM-11556 - Thermochromatic Pigment - Sapphire Blue (20g)
No product available!
No product available!
Printed circuit board with programmed circuit for a temporary proximity switch. AVT1980 A +
No product available!
No product available!
Patchcord UTP 5E Ethernet cable with a length of 1.5 m - black, with 2xRJ45 connectors
No product available!
No product available!
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM527
No product available!
No product available!
One-touch touch sensor module, illuminated with blue diodes, with AT42QT1010, ERAmatic
No product available!
No product available!
Particle Photon is an IoT module with an ARM microcontroller (Cortex-M3) and a WiFi module. The module has a 2.54 mm goldpin connector. WRL-13774