- Out-of-Stock
Universal charger for 1-6S Li-Ion, LiPo, LiFe, LiHV, Pb, Ni-Cd and Ni-MH batteries. It is powered by a DC XT60 connector, is equipped with an XT60 socket and a balancer connector. ISDT Q6 Nano
ISDT Q6 Nanois a universal charger designed for Li-Ion, LiPo, LiFe, LiHV, Pb, Ni-Cd and Ni-MH batteries. It is powered by the XT60 DC connector, it is equipped with an XT60 connector for connecting the battery and a balancer connector. The charger can handle packages from 1S to 6S for Li-Ion, LiFe, LiHV, LiPo batteries and from 1S to 16S for Ni-MH and Ni-Cd batteries. It has a built-in 1.5 "LCD display and a joystick to control the device. Cooling during charging is provided by an aluminum heat sink, built-in fan and openings in the case.
The software update is carried out via the microUSB connector. The charger is supported by the scOS 2.0 system and supports BattGo and SmartPower. Thanks to its small size, it is very handy and will work in all conditions.
Manufacturer
Responsible person
Blue USB 3.0 A cable - microUSB 3.0 B with 1m length, allowing SuperSpeed transmission (up to 5Gbit / s = 625MB / s)
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
No product available!
A set of XT60 connectors (male plug and female socket with covers) with a maximum forward current of 60 A. It works well as a battery connector or a power connector in RC models. Amass XT60
XT60E-M connector (male plug) with a maximum conductive current of 60 A. Equipped with mounting holes, it will work as a battery connector or a power connector in RC models. Amass XT60E-M
20 cm long cable with XT60 plug and two banana plugs. It allows you to connect a battery with an XT60 socket to the charger
Complete drive in the form of a 72.6 mm diameter wheel integrated with a PMSM motor and controller. Communicates via UART bus, offers feedback information such as temperature, position, speed and current consumption. Waveshare DDSM115
No product available!
A USB thermal camera module for Raspberry Pi offering precise temperature detection with a resolution of 80×62 pixels. It enables easy integration into industrial applications and control systems. It is an ideal solution for temperature monitoring, thermal analysis and security systems. Waveshare Thermal-90 USB Camera
No product available!
Thermal camera module for Raspberry Pi offering precise temperature detection with 80x62 pixel resolution. It enables easy integration into industrial applications and control systems. It is ideal for temperature monitoring, thermal analysis and security systems. Waveshare Thermal-90 Camera HAT
No product available!
A wireless compressor with a digital LED pressure gauge, powered by a battery charged via USB, with a maximum pressure of 6.9 bar and a capacity of 25 l/min, equipped with automatic shutdown after reaching the set pressure, a charge indicator and built-in lighting, is compact, handy and ideal for inflating tires, balls and other objects. Sthor-82120
No product available!
STHOR 65498 precision bits made of CrV 6150 steel, with milled profile, sandblasted finish and anti-corrosion coating, ideal for tightening and removing screws or bolts
No product available!
A tester for 1.5V and 9V batteries, which does not require a power supply, allows a simple assessment of the battery condition by touching the poles with the metal terminals, with the measurement results under load indicating green (GOOD), yellow (LOW) and red (REPLACE, RECHARGE) fields, compact and easy to store. Sthor-81700
No product available!
Universal diamond disc for angle grinders, equipped with a continuous turbo segment with a height of 7.5 mm, intended for cutting ceramics, concrete, bricks, stone, limestone, reinforced concrete and granite, for wet or dry operation, with a recommended speed of approximately 6600 rpm. Sthor-08793
No product available!
Universal diamond disc for angle grinders with a 7 mm continuous turbo segment, designed for wet or dry operation, recommended for cutting concrete, bricks, stone and other building materials, with a recommended speed of approximately 12,000 rpm. Vorel-08751
No product available!
Full diamond disc for angle grinders with a diameter of 115 mm and a mounting of 22.2 mm, with a cutting segment of 5.3 mm in height and 2.1 mm in thickness, intended for "wet" work when cutting ceramic tiles, stoneware, glazed tiles, stone tiles, glass and porcelain, with maximum revolutions of 12,000/min and linear speed of 80 m/s. YT-6012
No product available!
Filament Artillery PLA White 1kg 1.75mm is a high-quality, versatile filament for 3D printers, ensuring precise and aesthetic prints
No product available!
Filament Artillery PLA Black 1kg 1.75mm is a high-quality, versatile filament for 3D printers, ensuring precise and aesthetic prints
No product available!
The Sthor 21400 HSS drill set is a reliable tool, ideal for precise drilling in steel. Sthor-21400
No product available!
The SDS-Max Sthor 23399 drill is a reliable tool for professional drilling in difficult construction materials. Sthor-23399
No product available!
Spiral wood drill bit made of high-quality HSS 4241 steel, intended for professional use in soft and hard wood, plywood, chipboard and carpentry boards, with a centering blade for precision, quick removal of material and a 1/4" (6.3 mm) HEX holder. YT-33865
No product available!
Designed for professional drilling in high-quality stainless steel, construction steel, INOX and cold-rolled steel, drills made of HSS steel, with a 135° "split point" cross point for perfect centering without puncturing, quickly dissipating heat, with a lower coefficient of friction, ground according to the standard DIN 338 for precision, strong thanks to construction from one piece of HSS 6542 steel, and equipped with a 1/4" (6.3 mm) HEX chuck. YT-44880
No product available!
High-quality Toya 4.5 mm HSS drill ideal for precise drilling in steel. Set of 10 pieces. Sthor-20450
No product available!
Universal charger for 1-6S Li-Ion, LiPo, LiFe, LiHV, Pb, Ni-Cd and Ni-MH batteries. It is powered by a DC XT60 connector, is equipped with an XT60 socket and a balancer connector. ISDT Q6 Nano