- Out-of-Stock
Orange Pi RK3399 2GB - computer with SoC Rockchip RK3399 chip
ID: 569635
Minicomputer equipped with SoC Rockchip RK3399 (ARM Cortex-A72 / ARM Cortex-A53). The computer has been well-equipped, including in the Gigabit Ethernet interface, mSATA interface, miniPCIe connector, USB type C, dual CSI interface, etc. On the board you can run Android 6.0 and Linux
Description
Orange Pi RK3399 is a mini-computer equipped with SoC Rockchip RK3399 (ARM Cortex-A72 / ARM Cortex-A53). The computer has been well-equipped, including Gigabit Ethernet connector, mSATA interface, miniPCIe connector, USB type C, dual CSI interface, etc. The board can run Android 6.0 and Linux.
properties
- SoC system: Rockchip RK3399
- Two 64-bit ARM Cortex-A72 cores and four 64-bit ARM Cortex-A53 cores with a separate NEON coprocessor
- Quad-core ARM Mali-T860 GPU
- PMU module RK808
- 2 GB DDR3 RAM memory
- High-Speed eMMC memory with 16 GB capacity
- MicroSD card slot (TF)
- MSATA interface
- MiniPCIe connector (LTE / mSATA)
- Built-in WiFi module AS6356S: two bands (2.4 GHz / 5 GHz), 802.11a / b / g / n / ac, 2x2 MIMO
- Bluetooth 4.1 (Supports BLE)
- Ethernet 10/100/1000 Mbps - Realtek RTL8211E chip
- HDMI 2.0 type A connector: 4K @ 60Hz resolution
- DP 1.2 (DisplayPort) connector: 4K @ 60Hz resolution
- 2 x MIPI, resolution 2560x1600 @ 60fps on both channels
- eDP 1.3 (4 channels, 10.8 Gbps)
- HDMI input
- 3.5 mm Jack connector - audio input or output
- Speaker output (1.5W 8Ω or 2.5W 4Ω)
- SPDIF interface
- Built-in microphone
- I 2 S interface
- Mic Array interface
- 2 x MIPI-CSI up to 13 Mpix for each channel
- Support for USB cameras
- Gyroscope + Accelerometer (MPU6500)
- Gyroscope (LSM6DS3)
- Hall Sensor (HAL248TWCL)
- Light sensor (CM32181)
- Magnetometer (AK09911)
- SIM card slot, can be used with LTE extension on the miniPCIe connector
- 4 USB 2.0 connectors
- USB 3.0 type C connector
- IR receiver
- Serial port for debugging
- GPIO port 40-pin (4 x I 2 C, 1 x SPI, 2 x UART, 5 x I / O)
- DC power connectors: 12V / 2A (2-pin), 5V / 2A (2-pin)
- DC power connector 5.5x2.1 12V / 2A, USB type C 5V / 3A
- Possibility of powering from two 7.4 V batteries
- Operating systems: Android 6.0, Debian 9
- Dimensions: 99 x 129 mm
- Weight: 99 g
Description of elements and connectors
569635
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The popular micro SDHC format, used in smartphones, tablets and cameras. Class 10 product with a UHS-I interface from Goodram. Reading speed: up to 60 MB / s, write: up to 15 MB / s
zł15.89
24h
Available quantity: 58
Available
Switched-mode AC Power supply 12V/2A with DC 5.5x2.1 connector and EU plug. It has anti-overload, anti-overvoltage, short circuit protection. Conform to the norm Energy efficiency Level V. Length of output cable is 1.2m
zł43.90
24h
Available quantity: 21
Available
12V/2A Power Supply Unit EU for Odroid HC2
zł41.29
24h
Available quantity: 22
Available
Other products in the same category (16)
Kit with LED strip controlled by WiFi. It is resistant to water (IP65 standard) and can glow to the music. Controlled by the EWeLink application. Sonoff L1 Smart Led light Strip
Retired
No product available!
No product available!
Pre-installed Android5.x or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
Retired
No product available!
No product available!
No product available!
Easy-to-use and intuitive 3D printer with a touch screen and USB, WiFi and cloud file transfer support. The printer is fully assembled and ready to use. Flashforge Adventurer 3
Retired
No product available!
Black nylon filament with carbon fiber PA12 + CF5, 1.75 mm in diameter. 0.5 kg of filament is wound on the spool. Fiberlogy Nylon PA12 + CF5 Black
Retired
No product available!
The GY-GPS6MV1 module is a board containing the U-blox NEO-6M GPS receiver system. The tile also includes RTC backup battery, antenna connector (U.FL), voltage stabilizer and UART signal outputs
Retired
No product available!
No product available!
Trenz TE0808-04-09EG-1EA is a module containing the Xilinx Zynq Ultrascale + MPSoC (XCZU9EG-1FFVC900E) system, 2 GB DDR4 SDRAM memory, 64 MB flash memory, 20 transceivers with 1 Gbit bandwidth and pulse converters for all internal voltages power. Trenz TE0808-04-09EG-1EA
Retired
No product available!
No product available!
No product available!
AVT kit for self-assembly of a practical power splitter with quick-release clamps. AVT3175 B
Retired
No product available!
No product available!
3-axis digital output gyroscope, +-245dps, I2C, SPI, LGA16, STM, RoHS
Delivery date unknown
No product available!
The UT203 clamp meter is designed for measuring AC and DC current, AC and DC voltage, resistance and frequency. It is equipped with a relative measurement function, Hold function and automatic range change. Uni-T UT203
Retired
No product available!
Minicomputer equipped with SoC Rockchip RK3399 (ARM Cortex-A72 / ARM Cortex-A53). The computer has been well-equipped, including in the Gigabit Ethernet interface, mSATA interface, miniPCIe connector, USB type C, dual CSI interface, etc. On the board you can run Android 6.0 and Linux