- Out-of-Stock
iCoupler - galvanic USB separator
ID: 576259
5906623432745
Description
Galvanic USB separator based on ADuM3160 and ADuM4070 from Analog Devices.
It provides galvanic separation between USB interfaces (see figure below). The separator is equipped with a DC / DC converter that converts the USB voltage of 5VDC to the same voltage on the "secondary" side. The maximum output power of the inverter is 2.5W.
The DC / DC converter was made on a specialized ADuM4070 (Analog Devices) system, which works with the Pulse PH0555NL transformer. The separation of bidirectional D + and D- lines of the USB interface was performed using the ADuM3160 (Analog Devices) system.
The galvanic USB separator is very useful in professional applications. It prevents, among others damage to the computer to which we attach a programmer or hardware debugger, which supports the launch of the digital system. In a situation in which a computer and a running digital system are powered from other phases of the power network (this is often the case in practice) there is a high risk of a potential difference between the masses of devices. In an extreme case, electric shock or high current through the data cables may occur.
Features
- Based on the ADuM3160 chip from Analog Devices.
- Provides galvanic separation between computer and USB device (converter programmer, etc.)
- ADuM4070 DC / DC converter with a maximum capacity of 2.5W
- Pulse DC / DC isolation transformer PH0555NL
- Adapted to work in USB2.0FS mode (12 Mb/s)
- White LED indicating operation (and being the role of the DC / DC converter preload)
- Dimensions: 40 x 85 x 25 mm
576259
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
1-meter long USB Type-C cable enabling fast data transmission and powering electronic devices with a USB C port, such as smartphones and Macbooks. It works in the USB 3.1 standard with speeds up to 5 Gb/s. Akyga AK-USB-25
Retired
No product available!
1-meter cable with a USB C plug, enabling data transmission between USB C and USB A devices and used as a charger tip, compatible with USB 3.1. Akyga AK-USB-15
Retired
No product available!
1.5-meter power extension cable with an IEC C13 plug and an IEC C5 connector, ideal for powering a home theater or as an extension for a laptop charger. Its high quality and length make it reliable even in hard-to-reach places. Akyga AK-NB-03A
Retired
No product available!
The USB-FDCAN converter is a device that enables communication between the computer and the CAN (Controller Area Network). It supports the CAN FD standard and is equipped with a Microchip MCP2542FD transceiver. FDCAN USB converter
Retired
No product available!
An e-Paper display driver for the Raspberry Pi with the IT8951 chip, which provides smooth and efficient management of content display on e-Paper screens. It supports various communication interfaces, such as USB, SPI, and I80. Waveshare e-Paper Driver HAT
Retired
No product available!
Test probe tip with 500X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP500-2
Product available on request. Please send your inquiry to the following address: sales@kamami.com
Retired
No product available!
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in USB port, GPIO and a microSD card slot. Waveshare Luckfox Pico
Retired
No product available!
Serial port to Ethernet converter module based on the ESP32 series from Wireless-Tag. It integrates an optimized TCP/IP protocol stack and is characterized by extremely high performance, stability, versatility and reliability. WT32-ETH01-PIN
Retired
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in Ethernet port, USB, GPIO and 128 MB of SPI Flash memory. Waveshare Luckfox Pico Plus
Retired
No product available!
Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. Communicates via USB interface. Waveshare Thermal USB Camera
Retired
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in USB port, GPIO and a microSD card slot. Waveshare Luckfox Pico M
Retired
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in Ethernet port, USB, GPIO and 128 MB of SPI Flash memory. Waveshare Luckfox Pico Plus M
Retired
No product available!
Module with a 2 MP camera equipped with an IMX390 sensor. It has a built-in manually adjustable focus. The set includes a USB 3.0 adapter, a tripod and a cable. ArduCAM B0476
Retired
No product available!
A set with four IMX708 cameras with a resolution of 12 MP and a Camarray HAT expansion module for Raspberry Pi, which allows you to simultaneously connect four cameras to a minicomputer. ArduCAM B0484
Retired
No product available!
Matrix display module with a Raspberry Pi Pico W control board. It has built-in 1024 RGB LEDs in a 32x32 arrangement, an amplifier with a speaker and buttons. Perfect for building a clock, displaying sensor data or presenting weather data. Pimoroni PIM670
Retired
No product available!