Basics of SCADA system programming. AUTOMATION AND CONTROL SYSTEMS

Blue plastic case for Raspberry Pi 4B minicomputer. There is space for mounting a fan and a camera holder

Permanent cylindrical neodymium magnet with a diameter of 12 mm and a height of 5 mm.

Module with MOSFET RFP30N06LE transistor with N channel. Equipped with two screw connections. For assembly. SparkFun COM-12959

Sensor module for electromyography (EMG). Allows muscle activity to be studied and used to control devices. SparkFun DEV-21265

LCD 4x20, 98x60mm, LED backlight (WHITE), FFSTN, backlight current I=60mA (U=5V)

Development board with SAMD21 microcontroller (ARM Cortex® M0+), 8 I/O lines, 12 PWM channels, micro-USB. The board is equipped with the ATSAMD21 module and SARA-U201 U-blox enabling the implementation of communication in GSM networks. Arduino MKR GSM 1400 ABX00018

A small motor with a plastic gear 120:1, the output shaft at an angle of 90° with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and maximum torque 1.4 kg*cm. Pololu 1124

GRASS & CRUNCH DRIVE EFFECT - SELF-MOUNTING SET

DCC CONTROL PANEL NANOX - CONTROLLED SYSTEM

USB TO UART solution with USB Type A connector, Waveshare

Cytron XBee Shield

Radiator designed for use with the Odroid C1 minicomputer. It helps cool the quad-core processor in a short equipped Odroid C1.

PROGRAMMED 4-CHANNEL COMPARATOR / METER TERMINAL - PLATES AND PROGRAMMED SYSTEM

The UT203 clamp meter is designed for measuring AC and DC current, AC and DC voltage, resistance and frequency. It is equipped with a relative measurement function, Hold function and automatic range change. Uni-T UT203