- Out-of-Stock
Pololu 1146 - 4-AAA Battery Holder, Back-to-Back
ID: 195566
4-AAA Battery Holder, Back-to-Back
4-AAA Battery Holder, Back-to-Back
Battery holder for four AAA cells arranged as two back-to-back two-cell holders.
This battery holder features two 6", 26-gauge leads that have 5 mm of insulation stripped off of the ends.
People often buy this product together with:
 |
4-AAA Battery Holder |
 |
4-AA Battery Holder, Back-to-Back |
 |
0.100" (2.54 mm) Breakaway Male Header: 1x40-Pin, Straight |
195566
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The 4 AAA R3 battery holder is a basic but essential item for those who need a simple way to connect batteries for higher voltage. Cable length 15 cm
zł2.71
24h
Available quantity: 45
Available
Other products in the same category (16)
No product available!
No product available!
Flex Cable for Raspberry Pi Camera - 300mm / 12". Adafruit 1648
Retired
No product available!
No product available!
SanDisk micro SDHC memory card with a capacity of 16 GB, a maximum write speed of 12 MB / s, a maximum reading speed of 18 MB / s.
Retired
No product available!
Digilent ZYBO SoC platform powered by Xilinx Zynq Z-7010 with a dual-core ARM® Cortex-A9 processor and an Xilinx 7-series FPGA. 410-279
Retired
No product available!
No product available!
No product available!
Needle bending needle, for precise glue application, Flux 1,372mm internal diameter and 1,829mm outside diameter
Retired
No product available!
No product available!
A small motor with a plastic gear 120:1, the output shaft at an angle of 90° with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and maximum torque 1.4 kg*cm. Pololu 1124
Retired
No product available!
Zbigniew Michalewicz
Delivery date unknown
No product available!
No product available!
Size XS antistatic ESD safety gloves. Made of nylon fiber, they enable precise handling of objects and feeling of small elements
Retired
No product available!
The module with the DS18B20 sensor is used to measure the temperature in the range from -55° C to + 125° C, with an accuracy of +/- 0.5° C in the range from -10° C to + 85° C. The module communicates via the 1-Wire interface, thanks to which it can be connected using 2 or 3 wires - depending on the configuration. Temperature measurement can be performed with an accuracy of 9 to 12 bits. MOD-31.Z
Retired
No product available!
No product available!
4-AAA Battery Holder, Back-to-Back