- Out-of-Stock

Kit with a 7.5" e-Paper display with passive power supply via NFC and an NFC module based on the ST25R3911B chip and the STM32F103 microcontroller. The display is enclosed in a lightweight case that protects against mechanical damage. No batteries required, and the transfer of displayed data and power during transfer is possible thanks to the NFC technology.
The NFC module has a built-in microSD card slot, on which the user can store graphics and then send them to the display using wireless technology. It is also equipped with an OLED display, function buttons, a microUSB socket and a USB-UART converter.
1. STM32F103RBT6 | 8. 2 x LED indicator |
2. NFC chip ST25R3911B | 9. MCU pins |
3. SRAM 23LC1024, 1 MBit | 10. microUSB |
4. USB-UART converter CR2102 | 11. microSD |
5. 3,3 V voltage regulator SPX3819 | 12. SWD interface |
6. OLED 1,3" display | 13. NFC coil |
7. 4 buttons | 14. UART |
The displayed image can be also sent using a mobile device with the NFC function (the manufacturer provides the module with an application enabling data transfer to the display in a simple and convenient way). Full documentation with examples of use is available on the product Wiki page.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
E-Paper display with a diagonal of 7.5" and a resolution of 800x480 px with passive power supply via NFC. Waveshare 7.5inch NFC-Powered e-Paper
No product available!
Development kit with MSP430F1122IDW microcontroller
No product available!
Pin strip straight in yellow, single-row, female, 1x6 contacts, pitch 2.54mm, THT, RoHS. PB06S YELLOW
No product available!
No product available!
No product available!
No product available!
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM332
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
A module that allows you to control single-color LED strips and chains via WiFi using a smartphone application. It is powered with the voltage from 12 V to 24 V, has one channel with a capacity of 5 A. BleBox wlightBoxs Pro
No product available!
No product available!
No product available!
No product available!
Set with a 7.5" e-Paper display with passive power via NFC, NFC module and microSD card. Waveshare 7.5inch NFC-Powered HD e-Paper Eval Kit