- Out-of-Stock
UGO Marapi SL130 - 2.5" HDD/SSD SATA enclosure with USB 3.0 interface
ID: 584999
External enclosure designed to protect, transfer and store data on 2.5” HDD and SSD drives with SATA interface. UGO UKZ-1531
Description
External enclosure designed to protect, transfer and store data on 2.5” HDD and SSD drives with SATA interface with a maximum height of 9.5 mm. It is connected to a computer via USB 3.0, and compatibility with the SATA III interface enables data transfer with a maximum speed of up to 5 GB/s.
UGO Marapi SL130 supports Plug & Play technology, which allows you to connect the device without installing drivers. The housing is equipped with a signaling LED indicator, and thanks to the tool-free operation, the disk assembly is quick and efficient. It will work as an effective protection against mechanical damage and unfavorable conditions.
Features
- Dedicated to 2.5" drives
- Disk interface: 22-pin SATA III
- Maximum data transfer rate: up to 5 Gb/s
- Connector: microUSB 3.0
- Supported operating systems: Linux, MAC, Windows 2000, Windows 7, Windows 8, Windows Vista, Windows XP, Windows 10
- LED diode indicating operation
- Material: ABS
- Black colour
- Dimensions: 121 x 78 x 15 mm
Kit contains
- UGO Marapi SL130 enclosure
- Case
- MicroUSB 3.0 cable
584999
Manufacturer IMPAKT SPÓŁKA AKCYJNA Stanisława Lema 16 62-050 Mosina Poland zgody@impakt.com.pl
Responsible person IMPAKT SPÓŁKA AKCYJNA Stanisława Lema 16 62-050 Mosina Poland formularz kontaktowy na stronie osoby odpowiedzialnej
You might also like
GOODRAM CX400 gen. 2 SSD with a capacity of 128 GB. It is equipped with a SATA III interface, has a 2.5" format. Goodram SSDPR-CX400-128-G2
zł96.86
Delivery date unknown
No product available!
GOODRAM CX400 gen. 2 SSD with a capacity of 256 GB. It is equipped with a SATA III interface, has a 2.5" format. Goodram SSDPR-CX400-256-G2
zł182.90
24h
Available quantity: 2
Available
GOODRAM CX400 gen. 2 SSD with a capacity of 512 GB. It is equipped with a SATA III interface, has a 2.5" format. Goodram SSDPR-CX400-512-G2
zł325.70
Delivery date unknown
No product available!
Other products in the same category (16)
No product available!
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
Pre-installed Android 4.x or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
3.2D soldering tip, flat screwdriver 5.5mm in diameter, for WEP 926 soldering station
Retired
No product available!
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
5V / 3.1A eXtreme power supply with microUSB plug for all Raspberry Pi computers (including Pi 3 model B and Pi 3 model B +)
Retired
No product available!
Antenna with built-in LNA amplifier with high sensitivity, for mounting in a device using a GPS module. The antenna has a 25mm cable, terminated with a U.FL plug (IPEX). Dimensions of the device: 9 x 9 x 4mm
Retired
No product available!
The GY-GPS6MV1 module is a board containing the U-blox NEO-6M GPS receiver system. The tile also includes RTC backup battery, antenna connector (U.FL), voltage stabilizer and UART signal outputs
Retired
No product available!
Kit: MAXimator, MAXimator Expander, ZL32PRG - USB Blaster PRO
Retired
No product available!
Power Supply 2.5A 5.1V for Raspberry Pi 3 model B - STONTRONICS T5875DV
Retired
No product available!
MYD-JA5D44 Development Board is a complete educational platform. Its heart is the MYIR MYC-JA5D44 module, which was equipped with the Atmel SAMA5D44 processor based on Cortex-A5 cores. The processor can work at a maximum frequency of 600 MHz. Min. RS232, RS485 connectors, HDMI connector, 3.5 mm Jack Audio inputs, microSD memory card slot, 10/100 Mbps Ethernet slot and many more.
Retired
No product available!
The Raspberry Pi GPIO Triple Expansion Board converts the single GPIO headers on your Raspberry Pi into three parts. DFR0385
Retired
No product available!
Flex Cable for Raspberry Pi Camera - 300mm / 12". Adafruit 1648
Retired
No product available!
Comes with a 6"x6" (152mm x 152mm) square of Pyralux. It\'s ED-Y type copper at 35um (1 oz/ft2) and has a polymide of 25um (1 mil). The thick copper layer means it can carry a lot of current, and its trivial to solder to it. Adafruit 1894
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 50 cm - gray, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 50 cm - blue, with 2xRJ45 connectors
Retired
No product available!
External enclosure designed to protect, transfer and store data on 2.5” HDD and SSD drives with SATA interface. UGO UKZ-1531