- Out-of-Stock
Analog MEMS Microphone Breakout - ICS-40180 analog microphone module
ID: 585028
5906623420896
A module with a MEMS microphone and an amplifier that will allow you to detect a voice, a clap or a door slam. The board has an analog output. SparkFun BOB-18011
Description
Module with analog MEMS ICS-40180 microphone and amplifier, which allows direct connection to the ADC converter on the microcontroller. The microphone used is omni-directional, which means that it is good at picking up sound sources from all directions. The microphone port is located on the bottom of the board, so keep this in mind when installing the module in the project. The sensor will allow you to add sound to the application, it will allow you to detect voice, clap or slam the door. Full documentation with examples of use is available in the guide.
Features
- MEMS analog microphone
- -3 dB drop at 60 Hz and 19.7 kHz
- Supply voltage from 1.5 V DC to 3.6 V DC
- 40 mW output
- OPA344 provides an output impedance of 600 Ω
- SNR 65 dBA
585028
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.50
24h
Available quantity: 12402
Available
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
24h
Available quantity: 309
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
24h
Available quantity: 359
Available
Cables for evaluation boards, set of 10 pcs., green colour
zł5.46
24h
Available quantity: 118
Available
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
zł4.90
24h
Available quantity: 17
Available
Other products in the same category (16)
Siglent SDG2042X is a high-quality dual-channel function generator that combines advanced technology with ease of use. With a wide range of features, including TrueArb and EasyPulse, and precise signal processing, it is an ideal tool for engineers, technicians, and scientists who need a reliable device for signal generation and analysis across various applications. Siglent SDG2042X
Retired
No product available!
The Siglent SDG1032X, featuring a 30 MHz maximum output frequency and two output channels, is an indispensable function generator for engineers and technicians. With a sampling rate of 150 MSa/s, 16kpts memory, and 16-bit vertical resolution, this device provides high precision and reliability. Its compact design, along with standard USB and LAN interfaces and an optional GPIB, facilitates seamless integration into measurement systems and automation of tasks. Siglent SDG1032X
Retired
No product available!
ToolkitRC Q6AC is a versatile modeling charger that supports up to four batteries at a time, compatible with LiPo, LiFe, Li-Ion, NiMH and Pb cell types. It provides up to 400W of power when powered by AC mains and up to 1000W when powered by DC external power, and also offers fast charging via USB-C PD (65W) and USB-A Fast Charge (18W) ports.
Retired
No product available!
USB-UART converter with four isolated UART ports with built-in isolation of 1.5kV/3kV. It guarantees data transmission speeds of up to 12 Mbps and the ability to work with 1.8 V or 3.3 V voltage systems on the UART side. It is equipped with a USB Type C connector and is capable of operating in a wide temperature range from -40°C to +55°C. Electronic Prototypes EPED001A-10-STD
Retired
No product available!
NanoPi R6S minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor, 8 GB LPDDR4x RAM and 32 GB eMMC Flash memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6S
Retired
No product available!
NanoPi R6S minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor, 8 GB LPDDR4x RAM and 32 GB eMMC Flash memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6S
Retired
No product available!
NanoPi R5C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3568B2 processor, 4 GB of LPDDR4x RAM and 32 GB eMMC memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian. FriendlyELEC NanoPi R5C
Retired
No product available!
NanoPi R5C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3568B2 processor, 4 GB of LPDDR4x RAM and 32 GB eMMC memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian. FriendlyELEC NanoPi R5C
Retired
No product available!
NanoPi R5C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3568B2 processor, 2 GB of LPDDR4x RAM and 32 GB eMMC memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian. FriendlyELEC NanoPi R5C
Retired
No product available!
NanoPi R6C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor and 4 GB of LPDDR4x RAM. Supports booting from microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6C
Retired
No product available!
NanoPi R6C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor and 4 GB of LPDDR4x RAM. Supports booting from microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6C
Retired
No product available!
NanoPi R6C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor, 8 GB LPDDR4x RAM and 32 GB eMMC Flash memory. Supports booting from microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6C
Retired
No product available!
3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large working space of 240 x 240 x 260 mm and uses a metal hotend. It allows printing at a speed of 300mm/s, which translates into 30% faster printing compared to previous versions of Sidewinder printers. Artillery Sidewinder X3 Pro
Retired
No product available!
3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large working space of 300 x 300 x 400 mm and uses a fully metal hotend. It allows printing at a speed of 300mm/s, which translates into 30% faster printing compared to previous versions of Sidewinder printers. Artillery Sidewinder X3 Plus
Retired
No product available!
3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large working space of 240 x 240 x 260 mm and uses a full metal hotend and a dual gear extruder. It allows printing at a speed of 500mm/s. Artillery Sidewinder X4 Pro
Retired
No product available!
3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large workspace of 300 x 300 x 400 mm and uses a full metal hotend and a dual gear extruder. It allows printing at a speed of 500mm/s. Artillery Sidewinder X4 Plus
Retired
No product available!
A module with a MEMS microphone and an amplifier that will allow you to detect a voice, a clap or a door slam. The board has an analog output. SparkFun BOB-18011