- Out-of-Stock
XGecu T56 - universal programmer
ID: 587577
5906623468164
Universal EEPROM, Flash (NAND and NOR), eMMC, SRAM and MCU memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. XGecu T56
Description
Universal programmer for EEPROM, Flash (NAND and NOR), eMMC and MCU units. The device is controlled from a Windows computer using a dedicated application, and communication takes place via the USB 2.0 interface. The programmer is equipped with a ZIF-48 socket and an 8-pin ISP connector, and with the use of additional adapters, it can program circuits in various types of housings, including DIP, PLCC, SOP, QFP, TSOP or BGA, and with various voltage levels from 1.2 V to 6.5 V (VCC) and 6.5 to 25 V (VPP). A wide range of supported systems (full list of supported devices) makes XGecu T56 suitable for both professional and hobby use.
Features
- Communication interface: USB 2.0
- PIC32MZ 32-bit MCU 200MHZ + Xilinx SP6 FPGA microcontroller
- Supported chip types: serial EEPROM, parallel EEPROM and Flash, FLASH type NOR, NAND, SPI NAND, EMMC, NVRAM, CPLD
- Support for systems in housings: DIP, PLCC, SOP, QFP, TSOP or BGA (may require an additional adapter)
- ZIF-48 socket
- 8-pin ISP connector
- Programming speed: 12-25MB/s (write), 14-45MB/s (read)
- Self-test mode
- Supported voltage levels ranging from 1.2 V to 6.5 V (VCC) and 6.5 to 25 V (VPP) with 64 levels
- Power supply: USB or DC connector
- Current consumption up to 500 mA
- Reverse polarity, overload, overvoltage protection
- Software for Windows 2000, XP, 2003, 2008, Vista, 7, 10
- Dimensions: 129 x 85 x 29 mm
Kit contains
- XGecu T56 programmer
- USB cable
- ISP cable
587577
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A set of adapters dedicated to the XGecu T56 universal memory programmer. Enable memory support in BGA48, BGA63, TSOP56, SOP56 and EMMC153/160 package
zł909.65
24h
Available quantity: 1
Available
Adapter dedicated to the universal TL866II Plus memory programmer. It enables the memory support in the TSOP48 package
zł72.14
Delivery date unknown
No product available!
Adapter dedicated to the XGecu T56 universal memory programmer. Allows memory support in the BGA64 package
Regular pricezł449.72zł358.66
24h
Available quantity: 1
Available
Adapter dedicated to the XGecu T56 universal memory programmer. Allows memory support in the TSOP32 package
zł160.71
24h
Available quantity: 3
Available
Adapter dedicated to the XGecu T56 universal memory programmer. Allows memory support in the BGA48 package
zł387.77
24h
Available quantity: 3
Available
A set of adapters dedicated to the universal TL866II Plus memory programmer. They enable memory support in TSSOP, SOP and PLCC package
zł145.44
Delivery date unknown
No product available!
Adapter dedicated to the universal TL866II Plus memory programmer. It enables the memory support in the SOP44 package
zł17.06
24h
Available quantity: 3
Available
Other products in the same category (16)
Module with E-Ink (e-Paper) display with a diagonal of 2.9"and a resolution of 296x128 px with WiFi communication. Adafruit 4800
Retired
No product available!
Module with WM8960 audio decoder that allows you to operate 1 W stereo speakers and two microphones via the I2S interface. Adafruit 4757
Retired
No product available!
Module with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769
Retired
No product available!
Wireless temperature and humidity sensor. It allows you to track changes in temperature and humidity in your home. Shelly H&T BLACK
Retired
No product available!
High voltage differential probe. It is characterized by good measurement parameters: with a 100 MHz band and an operating voltage up to 700 V. The probe has two attenuation factors: 10X and 100X. Micsig DP10007
Retired
No product available!
The expansion board with the LoRaWAN SX1302 and GNSS L76B module is dedicated to Raspberry Pi minicomputers. The kit includes the 868M antenna, GPS and necessary cables. Waveshare SX1302 LoRaWAN Gateway HAT
Retired
No product available!
The module with the LoRaWAN ASR6501 system and an external antenna, designed for the M5Stack sets. M5Stack U117
Retired
No product available!
The LoRaWAN SX1302 module is equipped with a Mini-PCIe connector. It uses the SPI or I2C interface for communication. Waveshare SX1302 868M LoRaWAN Gateway
Retired
No product available!
Alkaline battery A27 12V 7.6x27.3 mm with a capacity of 25 mAh
Retired
No product available!
Black ABS ESD filament with a diameter of 1.75 mm. 0.75 kg of filament is wound on the spool. Fiberlogy ABS ESD Black
Retired
No product available!
ToF distance sensor module based on the VL6180X system. It offers a range of 2 to 50 cm and communicates via the I2C interface
Retired
No product available!
Graphic display 128 x 64 pixels, 68.7 x 48.5 mm, Type: COG, FSTN, reflective (without backlight), ST7565R. Artronic LCD-AG-C128064CF-FGN NO/-E6
Retired
No product available!
A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a BC2 tip
Retired
No product available!
Universal EEPROM, Flash (NAND and NOR), eMMC, SRAM and MCU memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. XGecu T56
Retired
No product available!
3DDescriptionprinter with the function of auto-leveling the bed, resuming printing and filament sensor. A kit for self-assembly. Anet ET4
Retired
No product available!
3D printer with the function of auto-leveling the bed, resuming printing and filament sensor. A kit for self-assembly. Anet ET4 PRO
Retired
No product available!
Universal EEPROM, Flash (NAND and NOR), eMMC, SRAM and MCU memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. XGecu T56