- Out-of-Stock
Filament ROSA3D ASA 1.75mm Yellow
ID: 587735
5907753131355
ROSA3D filament made of high-quality ASA polymer. 0.7 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ASA Yellow
Description
ASA filament (acrylonitrile-styrene-acrylic) for 3D printing with a diameter of 1.75 mm by ROSA3D. 0.7 kg of filament is wound on the spool. The recommended printing temperature is in the range of 220°C to 250°C, and the temperature of the bed during printing is in the range of 90°C to 110°C. The manufacturer recommends printing in a closed chamber.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. ASA filament from Rosa3D is resistant to UV radiation, moisture and heat. It will find applications in the automotive, marine and outdoor industries such as mirror housings, covers, radiator covers and sensor housings.
ASA filament is a suitable material for outdoor applications that will be intensely exposed to the sun and various weather conditions. It is ideal when the user needs an efficient material that will be less problematic than printing from ABS. The filament has less shrinkage and the vapors produced are much less noticeable. The softening point of ASA prints is higher compared to PLA and PET-G, there are no signs of deformation up to the temperature of about 94°C.
Features
- Color: Yellow
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 220°C to 250°C
- Bed temperature: 90°C to 110°C
- It is recommended to print in a closed chamber
- Density 1.07 g/cm3
- Odor: almost odorless
- Elongation at tensile 35%
- Tensile strength (to break) 40 MPa
- Tensile modulus 1750 MPa
- Impact strength according to the Izod method with a notch 45 kg*cm/cm
- Heat deformation temperature 94°C
- Net weight: 0.7 kg
587735
Data sheet
- Rodzaj filamentu
- ASA
- Ilość filamentu
- 0,7 kg
- Diameter
- 1,75 mm
- Colour
- Yellow
You might also like
3D printer with dual color print and heated table. The printer is fully assembled and ready to use. Flashforge Creator PRO
Regular pricezł4,365.91zł3,199.00
24h
Available quantity: 1
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.40
Delivery date unknown
No product available!
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł52.90
24h
Available quantity: 87
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł54.46
24h
Available quantity: 266
Available
3D printer with two extruder and a heated table. It is fully assembled and ready to use. Flashforge Creator Pro 2
Regular pricezł5,292.28zł3,999.00
24h
Available quantity: 1
Available
Other products in the same category (16)
Blue plastic case for Raspberry Pi 4B minicomputer. There is space for mounting a fan and a camera holder
Retired
No product available!
The case is designed for minicomputers Raspberry Pi 4 model B. It is made of aluminum and also serves as a large heat sink. Waveshare PI4-CASE-E
Retired
No product available!
The case is designed for minicomputers Raspberry Pi 4 model B. Made of ABS, has a built-in heat sink and cooling fan. Waveshare PI4-CASE-POLY-WITH-MINI-FAN-KIT
Retired
No product available!
The Uni-T non-contact thermometer is designed to measure the temperature of the human body. It allows you to measure the temperature in a non-invasive way in the range from 32°C to 42.9°C from a distance of 5 to 10 cm. Uni-T UT300H
Retired
No product available!
Kit with 16 modules and the IO Expansion Shield designed to work with the Arduino Uno. Dedicated to learning programming and electronics
Retired
No product available!
Development kit with ESP32 WiFi and Bluetooth module and 1.54 "ePaper display. Built-in IMU MPU6050 sensor and USB-UART converter. LilyGO TTGO T-Block ESP32
Retired
No product available!
Programmable watch with ESP32-Pico-D4. Equipped with a touch button display, motion sensor, power management system, RTC clock and Lithium battery. LILYGO TTGO T-Wristband
Retired
No product available!
Wrist strap for LilyGo TTGO t-wristband module. Black colour
Retired
No product available!
Solar panel with an output voltage of 6 V and a power of 1 W. Provides high efficiency and work stability
Retired
No product available!
8 Mpx camera module with IMX219 sensor and wide-angle lens. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0194
Retired
No product available!
The module with the OV5647 sensor, working with all versions of the Raspberry Pi. It uses a built-in movable IR-CUT filter that is turned on and off automatically depending on the lighting conditions. ArduCAM B003507
Retired
No product available!
Set of 4 mounting plates for Raspberry Pi 4B compatible with 19-inch 3U rack mount. The holder shown in the 3rd picture is not included in the set and must be purchased separately. ArduCAM U6131
Retired
No product available!
Camera module with IMX477 HQ sensor designed for Raspberry Pi Compute Module (CM3, CM3 +, CM4). Equipped with 1/2.3″ lens with M12 mount and 75° viewing angle. ArduCAM B0271
Retired
No product available!
Camera with a USB interface with a resolution of 8 MP. Equipped with a Sony CMOS IMX179 sensor and a wide-angle lens with a viewing angle of 105°. ArduCAM UB0229
Retired
No product available!
1 MPx camera module with OV9281 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter and an IR filter, it is characterized by good sensitivity. ArduCAM B0225
Retired
No product available!
2 MPx camera module with OV2311 sensor working with Raspberry Pi. Equipped with a shutter and M12 lens mount. ArduCAM B0219
Retired
No product available!
ROSA3D filament made of high-quality ASA polymer. 0.7 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ASA Yellow