- Out-of-Stock
New products
New products New products
zł343.01
24h
Available
Available
Available
Available
Available
Filament ROSA3D BioWOOD 1.75mm Brown
ID: 587736
5907753131362
ROSA3D filament made of high-quality biopolymer with wood particles. 1 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D BioWOOD
Description
ROSA3D BioWOOD filament for 3D printing with a diameter of 1.75 mm. 1 kg of filament is wound on the spool. The recommended printing temperature is in the range of 170°C to 210°C, and the temperature of the bed during printing in the range of 30°C to 50°C, however, when using adhesives, heating the bed is not necessary.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and high accuracy of the diameter and roundness of the filament.
The BioWOOD FILAMENT is made of a biopolymer consisting of 100% natural and 100% renewable resources. They are decomposed in the composting process. The material has a wide range of applications, from decorative elements, through dishes (bowls, plates, cups, cutlery) to use in the creation of musical instruments, toys and furniture. Printouts can be mechanically processed (sanded, turned, drilled, etc.) as well as painted and varnished.
Attention!
Due to the content of wood fibers, the manufacturer recommends using a printing nozzle with a diameter of at least 0.5 mm.
Features
- Color: Brown
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 170°C to 210°C
- Bed temperature: 30°C to 50°C
- Recommended nozzle diameter: from 0.5 mm
- Density 1.26 g/cm3
- Woody fragrance
- Elongation at tensile 3%
- Tensile strength (to break) 34 MPa
- Tensile modulus 3200 MPa
- Vicat softening temperature 50°C
- Charpy impact strength 15 kJ/m2
- Net weight: 1 kg
587736
Data sheet
- Rodzaj filamentu
- BIO
- Ilość filamentu
- 1 kg
- Diameter
- 1,75 mm
- Colour
- Brązowy
You might also like
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.02
24h
Available quantity: 100
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł54.30
24h
Available quantity: 239
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł48.87
24h
Available quantity: 246
Available
Other products in the same category (16)
Two-way loudspeaker crossover with a crossover frequency of 3000 Hz. It works with speakers with an impedance of 4 to 8 Ω and offers power up to 50 W
Retired
No product available!
SpaceSOM series module with NXP i.MX8M plus 1.8 GHz processor (4 Cortex-A53 + Cortex-M7 cores), 2 GB RAM and 8 GB eMMC memory. SomLabs SLS35X8MPQC_1800C_02GR_08GE_0SF_C
Retired
No product available!
Development kit with ESP32 module and LoRa communication. It is equipped with an integrated ESP32-C3 chip with a 32-bit RISC-V core processor and a Wio-E5 STM32WLE5JC module as a long-range controller that supports the LoRa protocol. Seeed Studio 114992985
Retired
No product available!
USB-TTL converter with USB type A, micro USB and USB type C connectors. Enables communication between the UART serial interface and the USB interface. SB Components 24780
Retired
No product available!
The 7-color ACeP e-Paper display has a diagonal of 7.3" and a resolution of 800x480 px. Communicates via SPI interface. No PCB. Waveshare 7.3inch e-Paper (F)
Retired
No product available!
ACeP e-Paper 7-color display module with 7.3" diagonal and 800x480 px resolution. It communicates via SPI interface. Waveshare 7.3inch e-Paper HAT (F)
Retired
No product available!
LED strip driver module dedicated to the WS2812, Neopixel and SK6812. Designed to easily and quickly create animations using popular RGB LED strips. Pimoroni PIM653
Retired
No product available!
Matrix display module with Raspberry Pi Pico W control board. It has built-in 583 RGB LEDs in a 53 x 11 layout, an amplifier with speaker and buttons. Ideal for building a clock, displaying sensor data or presenting weather data. Pimoroni PIM631
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Candy
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Flower
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Frozen
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Jungle
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Moon
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Pacific
Retired
No product available!
Filament from ROSA3D made of high-quality ABS pellets. Placed on a cardboard thimble, on which 1 kg of 1.75 mm diameter filament is wound. ROSA3D ReFill ABS+ Black
Retired
No product available!
Filament from ROSA3D made of high-quality PLA pellets. Placed on a cardboard thimble, on which 1 kg of 1.75 mm diameter filament is wound. ROSA3D ReFill PLA Starter Black
Retired
No product available!
ROSA3D filament made of high-quality biopolymer with wood particles. 1 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D BioWOOD