- Out-of-Stock
Filament ROSA3D ASA 1.75mm Silver
ID: 587762
5907753130846
ROSA3D filament made of high-quality ASA polymer. 0.7 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ASA Silver
Description
ASA filament (acrylonitrile-styrene-acrylic) for 3D printing with a diameter of 1.75 mm by ROSA3D. 0.7 kg of filament is wound on the spool. The recommended printing temperature is in the range of 220°C to 250°C, and the temperature of the bed during printing is in the range of 90°C to 110°C. The manufacturer recommends printing in a closed chamber.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. ASA filament from Rosa3D is resistant to UV radiation, moisture and heat. It will find applications in the automotive, marine and outdoor industries such as mirror housings, covers, radiator covers and sensor housings.
ASA filament is a suitable material for outdoor applications that will be intensely exposed to the sun and various weather conditions. It is ideal when the user needs an efficient material that will be less problematic than printing from ABS. The filament has less shrinkage and the vapors produced are much less noticeable. The softening point of ASA prints is higher compared to PLA and PET-G, there are no signs of deformation up to the temperature of about 94°C.
Features
- Color: Silver
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 220°C to 250°C
- Bed temperature: 90°C to 110°C
- It is recommended to print in a closed chamber
- Density 1.07 g/cm3
- Odor: almost odorless
- Elongation at tensile 35%
- Tensile strength (to break) 40 MPa
- Tensile modulus 1750 MPa
- Impact strength according to the Izod method with a notch 45 kg*cm/cm
- Heat deformation temperature 94°C
- Net weight: 0.7 kg
587762
Data sheet
- Rodzaj filamentu
- ASA
- Ilość filamentu
- 0,7 kg
- Diameter
- 1,75 mm
- Colour
- Srebrny
You might also like
3D printer with dual color print and heated table. The printer is fully assembled and ready to use. Flashforge Creator PRO
Regular pricezł4,365.91zł3,199.00
24h
Available quantity: 1
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.40
Delivery date unknown
No product available!
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł54.30
24h
Available quantity: 283
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł48.55
24h
Available quantity: 253
Available
3D printer with two extruder and a heated table. It is fully assembled and ready to use. Flashforge Creator Pro 2
Regular pricezł5,292.28zł3,999.00
24h
Available quantity: 1
Available
Other products in the same category (16)
The STM32 eXploreM0 + module contains a 32-bit microcontroller with ARM Cortex M0 + core, STM32L051C8T6 (64 kB of Flash memory, 8 kB RAM, 32 MHz, I2C, IrDA, SPI, UART / USART). The built-in USB / UART converter enables programming of the microcontroller via a USB cable. MOD-41.Z
Retired
No product available!
No product available!
The RGB LED ruler has 8 programmable LEDs WS2812B with a built-in control system. It is possible to set a specific color for each diode. The module has an IN input for controlling and an OUT output to which further light points or other modules from WS2812B can be connected. The supply voltage is from 3.5 to 5.3 V, and the input voltage +/- 0.5 V of the supply voltage
Retired
No product available!
No product available!
No product available!
Real-time clock with PCF8563 chip and battery backup. Modally MOD-48.Z
Retired
No product available!
V4 features the same sensors as v3 (L3GD20H, LSM303D) and adds an LPS25H digital barometer. An I²C interface accesses 10 independent measurements that can be used to calculate the sensor’s altitude and absolute orientation.
Retired
No product available!
Ultralow Power Boost Regulator with MPPT and Charge Management, LFCSP16, Analog Devices Inc., RoHS
Retired
No product available!
Integrated circuit - Low Power Programmable Temperature Controller, 8-SOIC, Analog Devices, RoHS
Retired
No product available!
Integrated circuit - Four White LED Backlight Driver, LFCSP 16 VQ housing, Analog Devices, RoHs
Retired
No product available!
Integrated circuit - Charge Pump Driver for LCD White LED Backlights, 16-VFQFN Exposed Pad, CSP, Analog devices, RoHS
Retired
No product available!
4-channel white LED driver based on the Boost converter; 2.8 ... 18V; 100mA; 12 LFCSP; Analog Devices; Compliance
Retired
No product available!
Linear battery charger Li-Ion; 4,0 ... 6,7V; LFCSP-20; Analog Devices; Compliance
Retired
No product available!
Keyboard decoder and I / O port expander; I2C; LFCSP-16; Analog Devices; Compliance
Retired
No product available!
A 10-bit programmable magnetic object rotation sensor (encoder). It can work at 3.3V and 5V, it has a measurement resolution of 0.35 degrees and a serial and PWM signal output. The system has a SSOP16 housing
Retired
No product available!
The 9DoF module allows measurements of acceleration, angular velocity and direction of the magnetic field. Communication with the system takes place via the I2C bus. modMPU9150 (GY-9150)
Retired
No product available!
ROSA3D filament made of high-quality ASA polymer. 0.7 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ASA Silver