- Out-of-Stock
AVT2710 B
ID: 190110
SIMPLE DISK MIXER - A KIT FOR SELF-ASSEMBLY
SIMPLE DISK MIXER - A KIT FOR SELF-ASSEMBLY
Producer: AVT
The system includes two stereo channels for music sources (eg CD or tape recorder) and one mono channel for the microphone. The mixer is powered by a single stabilized voltage - due to low power consumption, it can be supplied from the battery. The system uses low noise TL072 and TL071 operational amplifiers. This guarantees very good device parameters. The adjustment of the signal level and sound color is carried out using rotary potentiometers. Microphone track input is designed universally - you can connect a dynamic or electret microphone (two or three-pin) to it.
The device is especially recommended for DJs, musicians and electroacoustics
Selected parameters of the mixer:
- inputs: 2 x line (stereo), 1 x microphone (mono)
- frequency response (-3 dB): 22 Hz-90 kHz (line path), 30 Hz-63 kHz (microphone track)
- harmonic distortion <0.1%
- signal level in each channel regulated independently
- tone control (high, low)
- power supply - 9-15 V
- in the set a printed circuit board, a set of elements and documentation
- Detailed description in
Download
190110
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
Module with a UART-CAN converter designed to work with the Raspberry Pi Pico. It has a built-in E810-TTL-CAN01 transceiver and enables data transmission between a system with UART interface and a device with CAN. Waveshare Pico-CAN-A
Retired
No product available!
Monochrome OLED display with a diagonal of 1.3" and a resolution of 128x64 pixels. It has a built-in SH1106 controller, communication via the SPI interface. Pololu 3760
Retired
No product available!
The expansion module (shield) is designed for Teensy 4.0 and Teensy 4.1 boards. It allows you to easily connect displays from the SmartMatrix series. Adafruit 4828
Retired
No product available!
Module with E-Ink (e-Paper) display with a diagonal of 2.9"and a resolution of 296x128 px with WiFi communication. Adafruit 4800
Retired
No product available!
Module with WM8960 audio decoder that allows you to operate 1 W stereo speakers and two microphones via the I2S interface. Adafruit 4757
Retired
No product available!
Module with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769
Retired
No product available!
Wireless temperature and humidity sensor. It allows you to track changes in temperature and humidity in your home. Shelly H&T BLACK
Retired
No product available!
High voltage differential probe. It is characterized by good measurement parameters: with a 100 MHz band and an operating voltage up to 700 V. The probe has two attenuation factors: 10X and 100X. Micsig DP10007
Retired
No product available!
The expansion board with the LoRaWAN SX1302 and GNSS L76B module is dedicated to Raspberry Pi minicomputers. The kit includes the 868M antenna, GPS and necessary cables. Waveshare SX1302 LoRaWAN Gateway HAT
Retired
No product available!
The module with the LoRaWAN ASR6501 system and an external antenna, designed for the M5Stack sets. M5Stack U117
Retired
No product available!
SIMPLE DISK MIXER - A KIT FOR SELF-ASSEMBLY