.png)
- Out-of-Stock
Qwiic Quad Relay - 4-channel module with relays
ID: 581507
5906623420490
Module with 4 relays JZC-11F with a load of 5A. It enables switching devices with high power using a microcontroller. I2C communication. SparkFun COM-16566
Description
Module with 4 relays JZC-11F with a load of 5 A. It enables switching devices with high power using a microcontroller. The module is based on the ATtiny84 system, which carries out the commands for switching four relays. The I2C address is configurable by software (one of 100 available addresses can be selected). The module is powered by the DC connector with the voltage in the range of 7 to 12 V or 5 V after switching the jumper. The board is equipped with a number of security features. The product page features a guide and an Arduino library.
Features
- Four JZC-11F relays (5A, 250VAC, 30VDC)
- Each relay has its own LED and label for easy identification
- Security features: ground insulation, air gap, bold tracks
- ATtiny84A microcontroller
- I2C communication
- I2C address: 0x6D (default), 0x6C (jumper)
- Software configurable I2C address
- All commands are listed in the sample code.
- Screw terminals for 26-14 AWG wire
- 7 to 12 V power supply (via DC connector) or 5 V power supply with bypass jumper
- Current consumption up to 250 mA
581507
Data sheet
- Output current
- 5A
- Number of channels
- 4
- Executive element
- Przekaźnik
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł13.74
Delivery date unknown
No product available!
Other products in the same category (16)
Expansion module for NanoPi Duo2, equipped with an Ethernet port, serial port, audio and USB. It has a built-in quad-band SIM800C GSM / GPRS module. FriendlyELEC NanoPi Duo2 IoT-2G
Retired
No product available!
NanoPi Duo2 is a small PCB equipped with the SoC Allwinner H3 system, RAM memory with a capacity of 256MB and a built-in WiFi / Bluetooth module. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C interface. FriendlyELEC NanoPi Duo2
Retired
No product available!
LOGO! Text display TD with LED backlight designed for LOGO! 8 controllers. Powered by 12/24V voltage, it allows displaying 6 lines of text, 20 characters each. Siemens 6ED1055-4MH08-0BA0
Retired
No product available!
NanoPi Duo2 is a small PCB equipped with the SoC Allwinner H3 system, RAM memory with a capacity of 512MB and built-in WiFi / Bluetooth module. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C interface. FriendlyELEC NanoPi Duo2
Retired
No product available!
Starter kit with LOGO! 8 230RCE, software and necessary accessories. Siemens 6ED1057-3BA03-0AA8
Retired
No product available!
Starter kit with LOGO! 8 12/24RCE, power supply, software and necessary accessories. Siemens 6ED1057-3BA01-0AA8
Retired
No product available!
Li-Po battery 3.7V / 500mAh, PCM protection, connector + JST-BEC 2,54 socket, 2 pins, cable length 150mm
Retired
No product available!
Li-Po battery 3.7V / 560mAh with 100mm cables, PCM protection
Retired
No product available!
Li-Po battery 3.7V / 600mAh, PCM + NTC protection, 1.25 Molex connector, 3 pins, cable length 35mm
Retired
No product available!
Li-Po battery 3.7V / 650mAh, PCM protection, connector + jack 2.54 JST-BEC, 2 pins, wiring length 150mm
Retired
No product available!
Metal housing for the minicomputer NanoPC T3 Plus. The set includes a set of screws allowing to assemble the housing with a mini computer and an external antenna. FriendlyELEC NanoPC-T3 Plus
Retired
No product available!
Li-Po battery 3.7V / 700mAh, PCM protection, connector, 2 pins, cable length 150mm. Akyga LP503442
Retired
No product available!
Li-Po battery 3.7V / 1500mAh, PCM protection, connector + JST-BEC 2,54 socket, 2 pins, cable length 150mm
Retired
No product available!
Compact ORP system compatible with Arduino. It allows you to monitor the ORP without having to add additional circuits or components. DFRobot SEN0165
Retired
No product available!
Akyga power cord, IEC C7 250V / 50Hz, 1.5 m long
Retired
No product available!
The module allows to measure the distance to the obstacle by measuring the time difference between the wave sent and the reflected wave. Measuring range 2 ... 400cm. Sparkfun SEN-13959
Retired
No product available!
Module with 4 relays JZC-11F with a load of 5A. It enables switching devices with high power using a microcontroller. I2C communication. SparkFun COM-16566