- Out-of-Stock
Dispensing needle bent for flux, glue 0.25mm 25G
ID: 581449
Needle bending needle, for precise glue application, Flux 0.25mm internal diameter and 0,5144mm outside diameter
Description
Dosing needle bent, reusable, for precise application of pastes, adhesives, fluxes, fits both dosing syringes as well as traditional medical syringes. Its use allows for a significant reduction of materials used.
Features
- The needle is angled at 45 °
- For use with glue, flux, paste, etc.
- Internal diameter 0.25mm
- Outer diameter 0,5144mm
- Model: 25G
- Reusable
- Thanks to the use of a needle, the amount of materials used is reduced, and their application is much more precise
581449
Data sheet
- Needle type
- Bent
- Model
- 25G
- Inner diameter
- 0,26mm
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Silicone thermal grease used to improve the amount of heat transferred to, for example, the heat sink. The paste is resistant to oxidation and operating temperature in the range from -50 to 200 ° C. Paste in a syringe with a capacity of 25 g. AG Termopasty ART.AGT-056
zł15.28
24h
Available quantity: 5
Available
AG Silver thermal grease with the addition of silver compounds with high thermal conductivity. 3g paste in a syringe. AG Termopasty ART.AGT-107
zł16.92
24h
Available quantity: 1
Available
Thermal paste AG Extreme thanks to the use of steel dust additive ensures the discharge of large amounts of heat from electronic components (processors, graphics cards, power systems). 3g paste in a syringe. AG Termopasty ART.AGT-108
zł27.39
24h
Available quantity: 2
Available
AG Gold is a thermal paste with the addition of gold. It has an exceptionally high thermal conductivity (>2.8 W/mK), which is up to three times higher than most traditional products. 3g paste in a syringe. AG Termopasty ART.AGT-106
zł14.86
24h
Available quantity: 9
Available
Thermal paste AG Extreme thanks to the use of steel dust additive ensures the discharge of large amounts of heat from electronic components (processors, graphics cards, power systems). A paste weighing 1g in a syringe. AG Termopasty ART.AGT-162
zł14.32
24h
Available quantity: 5
Available
AG Silver thermal grease with the addition of silver compounds with high thermal conductivity. A paste weighing 1g in a syringe. AG Termopasty ART.AGT-164
zł7.69
24h
Available quantity: 5
Available
Other products in the same category (16)
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 9 V or 12 V and testing chargers. PDC005
Retired
No product available!
Development kit with RP2040 microcontroller equipped with two ARM Cortex-M0 + cores that work at 133 MHz, 264 kB RAM. The board has a QVGA camera, LCD display, IMU system and a microphone. ArduCAM B0302
Retired
No product available!
Camera module with a resolution of 13 MP equipped with an image sensor AR1335. It is equipped with a FoV 50° lens with an M12 mount. Designed for Raspberry Pi and Jetson Nano. ArduCAM B0277
Retired
No product available!
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. Totem TE-X4-KIT1
Retired
No product available!
Robot controller dedicated to Totem sets. It is equipped with Bluetooth communication, so it can be controlled using a smartphone. TMK-X3K totem
Retired
No product available!
Thermally conductive tape used as a replacement for thermally conductive paste. They are very flexible and characterized by high compressibility. AG Termopasty ART.AGT-161
Retired
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 1350 mAh, equipped with a PCM protection and a 1.5 JST-ZH connector. Akyga LP503758
Retired
No product available!
Module with a 3-axis MMA8452Q accelerometer. The system has a configurable measurement scale of ±2g/±4g/±8g. It is supplied with the voltage from 1.95 to 3.3 V and communicates via the I2C interface. SparkFun SEN-12756
Retired
No product available!
External enclosure designed to protect, transfer and store data on 2.5” HDD and SSD drives with SATA interface. UGO UKZ-1531
Retired
No product available!
128 GB Hynix SSD. It is equipped with NVMe PCIe 3.0 interface with M.2 B&M Key connector. Hynix HFM128GDHTNG-8310A
Retired
No product available!
Samsung 980 SSD 250 GB. It is equipped with NVMe PCIe 3.0 x4 interface with M.2 M Key connector. Samsung MZ-V8V250BW
Retired
No product available!
External case designed to protect, transfer and store data on M.2 SSD drives with SATA interface. GEMBIRD EE2280-U3C-01
Retired
No product available!
External enclosure designed to protect, transfer and store data on M.2 SSD drives with NVMe or SATA interface. Unitek S1204B
Retired
No product available!
Module with e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px with WiFi communication and Bluetooth 4.2. Waveshare 2.13inch e-Paper Cloud Module
Retired
No product available!
LoRa module based on ESP32-WROOM-32E with WiFi and Bluetooth communication and LoRa RFM95W modem. There are ESP32 pins and a Qwiic connector on the board. SparkFun WRL-18074
Retired
No product available!
A module with a MEMS microphone and an amplifier that will allow you to detect a voice, a clap or a door slam. The board has an analog output. SparkFun BOB-18011
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0.25mm internal diameter and 0,5144mm outside diameter