- Out-of-Stock
zł269.01
XU4 Shifter Shield
ID: 559205
5906623411764
This level shifter board contains 3 x TSX0108E bi-directional level shifter ICs. The 30-pin and 12-pin GPIO ports on the XU4 are converted to the more common 0.1inch (2.54mm) pitch 40-pin header. All the signals can be level shifted to 3.3V or 5V.
Description
All the native GPIO pins on the XU4 operate at 1.8V. However, many devices support only 3.3V or 5V. This level shifter board contains 3 x TSX0108E bi-directional level shifter ICs. The 30-pin and 12-pin GPIO ports on the XU4 are converted to the more common 0.1inch (2.54mm) pitch 40-pin header. All the signals can be level shifted to 3.3V or 5V. You can choose the voltage with a small hardware slide switch on the board.
The 40-pin header pin map is compatible with the ODROID-C1 and Raspberry Pi/Pi 2. We are working on the WiringPi compatible libraries to simplify development.
The XU3/XU3-Lite requires modification or removal of the 12-pin socket on the XU4 Shifter Shield.
The maximum output current is 4mA. Extra driver circuits may be required to control LEDs, motors or other devices that require more than 4mA.
Package include
- XU4 Shifter Shield Board
- 4 x 19mm PCB spacer (Metal)
- 8 x 10mm PCB spacer (Plastic)
Download
559205
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Module with SSR S208T02 relay with a load up to 4 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 103020004
Retired
No product available!
Module with a reed relay BR-500Ω with a load up to 0.5 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 103020014
Retired
No product available!
Module with a 3-axis gyroscope (ITG 3200 system). The measuring range is ± 2000 ° / s. The I2C interface is used for communication. The module has a low power consumption (typically 6.5 mA). The module has a connector in accordance with the Grove standard. Seeed studio 101020050
Retired
No product available!
Module module with ADC121C021 12-bit converter. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 103020013
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
Twisted housing, dedicated to the Orange Pi Zero computer. The housing protects the computer against dust, accidental short circuits and mechanical damage. Properly prepared holes allow you to use all the sockets that Orange Pi Zero has been equipped with.
Retired
No product available!
No product available!
Banana Pi M2+ is another ARM SoC powered development board that offers great computing performance in an ultra portable form factor. It is a 65mm square with Allwinner H3 Quad-core A7 SoC and 1GB DDR3 RAM
Retired
No product available!
Banana Pi camera module for Banana Pi M3, includes CMOS sensor module: OV5640 (5M Pixel)
Retired
No product available!
Printed circuit board and programmed AA / AAA cell capacity tester. AVT3169 A +
Retired
No product available!
AVT kit for self-assembly of tester capacity AA / AAA cells. AVT3169 B
Retired
No product available!
Assembled cell capacitor AA / AAA. AVT3169 B
Retired
No product available!
Printed circuit board for water level indicator. AVT1949 A
Retired
No product available!
This level shifter board contains 3 x TSX0108E bi-directional level shifter ICs. The 30-pin and 12-pin GPIO ports on the XU4 are converted to the more common 0.1inch (2.54mm) pitch 40-pin header. All the signals can be level shifted to 3.3V or 5V.