- Out-of-Stock
Arducam Multi Camera Adapter - stereo camera adapter for Raspberry Pi
ID: 581540
5906623403516
The expansion module to support two cameras is designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one minicomputer connector. ArduCAM B016601
Description
The expansion module to support two cameras is designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one minicomputer connector. Supports support for 5 MP and 8 MP cameras. Only one of the two cameras can be activated at a time (they operate alternately). It cannot support two cameras at the same time, but the manufacturer provides software that allows you to operate two cameras and make it appear as if they are running at the same time. The module significantly extends the capabilities of the Raspberry Pi in the area of camera support. It will be used for projects using stereo vision, 360 cameras or advanced surveillance systems.
Features
- Support all series Raspberry Pi boards, Pi HAT board style (Raspberry Pi 4 model B, Raspberry Pi 3 model B+, Raspberry Pi 3 model B etc.)
- Two MIPI camera inputs and one MIPI camera output
- Cooperation with cameras with MIPI CSI 1/2/4-lane interface
- Support 5MP / 8MP cameras
581540
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
zł179.00
Delivery date unknown
No product available!
Flex Cable for Raspberry Pi Camera - 100mm / 4"
zł2.90
24h
Available quantity: 513
Available
Flex Cable for Raspberry Pi Camera - 200mm / 8"
zł2.90
24h
Available quantity: 230
Available
Flex Cable for Raspberry Pi Camera - 300mm / 12"
zł4.31
24h
Available quantity: 45
Available
Flexible cable (tape) 50 cm long, used to connect the camera module with Raspberry Pi computers. The tape has 15 wires and a pitch of 1mm
zł3.03
24h
Available quantity: 42
Available
OV5647 Camera Board /w M12x0.5 mount Lens fully compatible with Raspberry Pi. ArduCAM B0031
Regular pricezł134.92zł85.29
24h
Available quantity: 4
Available
OV5647 Camera Board /w CS mount Lens fully compatible with Raspberry Pi. ArduCAM B0032
Regular pricezł180.05zł113.73
24h
Available quantity: 4
Available
100cm flexible cable (tape) for connecting the camera module to Raspberry Pi computers. The tape has 15 wires and 1mm pitch
zł8.19
24h
Available quantity: 3
Available
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł189.00
24h
Available quantity: 55
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł249.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł338.00
24h
Available quantity: 125
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł525.00
Delivery date unknown
No product available!
Other products in the same category (16)
7 pin GPIO ribbon cable (20 cm) for Odroid C4
Retired
No product available!
No product available!
3-wire cable with JST-ZH plug, 30 cm, 3x1 JST, 1.5 mm pitch
Retired
No product available!
A set for building a four-wheel, remote-controlled vehicle. Equipped with a programmable Arduino Uno R3 controller and set of sensors. modARD_02
Retired
No product available!
No product available!
No product available!
800x480, 7 inch Multicolor Graphic LCD, with capacitive touch screen and stand-alone touch controller
Retired
No product available!
An intelligent socket with the ability to control via Wi-Fi. It allows remote switching on / off of the device powered from 230V mains with a maximum power consumption of 10 A. The device works with the eWeLnik smartphone application
Retired
No product available!
Switch (relay) controlled via GSM / GPRS network. The switch (relay) allows remote control of the device powered from 230 V mains with a maximum power consumption of 16 A. The device works with the eWeLnik smartphone application
Delivery date unknown
No product available!
No product available!
The Google AIY Voice Kit is a set of components designed for the Rasbperry Pi 3 computer, allowing you to build an intelligent voice assistant based on Google Assistant. The kit can also work with TensorFlow. The kit requires self-assembly. Adafruit 3602
Retired
No product available!
This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. It\'s affordable but sounds great! The NXP UDA1334A is a jack-of-all-I2S-trades: you can use 3.3V - 5V logic levels (a rarity), and can process multiple different formats by setting two pins to high or low. Adafruit 3678
Retired
No product available!
PCB with a programmed layout for an animated 3D LED bomb controlled by an IR remote control. AVT1986 A +
Retired
No product available!
AVT kit for self-assembly of animated 3D LED baubles controlled by IR remote control. AVT1986 B
Retired
No product available!
A printed circuit board and a programmed layout for an animated 3D LED Christmas tree. VT1988 A +
Retired
No product available!
Zetaw AVT for self-assembly of the animated Christmas tree LED 3D. AVT1988 B
Retired
No product available!
The expansion module to support two cameras is designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one minicomputer connector. ArduCAM B016601