- Out-of-Stock
The charger is designed for NiCd and NiMH batteries with capacities from 500 to 3150mAh. You can connect both individual links and entire packages. The device charges the batteries with a current of 0.1C and simultaneously controls the time of the process - after 14 hours, it automatically switches to the maintenance charging mode.
The device is controlled by a microcontroller. Service consists in selecting the appropriate capacity of cells to be charged and initiating the process. The display shows all settings and the time remaining until the end of charging.
The device is particularly recommended wherever batteries are used
Selected parameters:
Download
Manufacturer
Responsible person
No product available!
No product available!
No product available!
Development kit with Leon Instruments AVR ATxmega128A3U microcontroller. Full set. Opportunity to cooperate with Arduino shields.
No product available!
Development kit with Leon Instruments AVR ATxmega128A3U microcontroller. Set in the SMD version - lack of some through-hole components. Opportunity to cooperate with Arduino shields.
No product available!
VL6180X explorer kit, STM32 F401RE nucleo board and VL6180X expansion board, STM
No product available!
TFT display module 3.2 with touchpanel and SD card slot, 40-pin
No product available!
Graphic display 128x32; 67.5x25.2mm, type: COG, FFSTN Negative, Transmissive, 3.3V UC1601, RGB backlight
No product available!
No product available!
No product available!
No product available!
TFT 2.8 "display module, touch panel, four buttons, dedicated to Raspberry Pi, RoHS
No product available!
The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%
No product available!
Single-channel Schmitt trigger inverter from the AHC logic family, designed for operation in a wide supply voltage range of 2.0–5.5 V. The SOT-23 package enables compact SMD mounting in digital designs.
No product available!
MYIR MYC-SAMA5D36 is a single board computer in the form of a card with SO-DIMM 200-pin connector. It has been equipped with the SAMA5D36 processor from Atmel, based on Cortex-A5 cores. It can work with a maximum frequency of 536 MHz. It has 512 MB DDR2 SDRAM, 256 MB NAND FLASH memory. GPIO ports, interfaces have been derived on the SO-DIMM 200-pin connector
No product available!
No product available!