- Out-of-Stock
iNode Nav (yellow) - wireless motion sensor and magnetic field
ID: 560412
Wireless motion sensor and magnetic field with built-in event memory (recorder)
Description
iNode Nav is a wireless motion sensor and magnetic field with built-in event memory (recorder). Allows you to locate moving objects. It has a built-in 14-bit 3-axis accelerometer and a 16-bit 3-axis magnetic field sensor. Thanks to the fact that the accelerometer and magnetometer status can be sent in the broadcast frame even 25 times per second, by simultaneous reception in several places it is possible to quickly and precisely determine the position in which the iNode Nav is located. You can use iNode LAN or iNode Serial Transceiver to receive data sent by iNode Nav.
properties
Bluetooth Low Energy
- Configurable from PC:
- Power with which the device operates in the range from -18 dBm to +8 dBm (maximum range up to 200m in open space)
- device name
- The period of sending the broadcast frame when the device is in motion
- Threshold value of acceleration used to detect motion
- user password
- Device access password; independent of the user's password, password for authorizing the application for a smartphone or PC (protects it against being copied and used by another client)
Power
- CR2032 battery
Housing
- plastic
- Dimensions: Ø 32mm x 9.5mm
others
- The possibility of remote software replacement
- Alternate firmware: iNode Care Sensor # 5
- Two LEDs
- 14-bit motion sensor, 3-axis accelerometer
- Temperature sensor with a resolution of 1 ° C
- working temperature: from -30 to 65 ° C
- Humidity: 35-80% RHG
- Weight: 5g
Additional magnetic field sensor FXOS8700
- sensitivity:
- From 1μT to 1200μT
- Type:
- 16-bit, 3-axis
Equipment
- CR2032 battery
Software
- Windows NT / XP / Vista / 7.0 / 8.0
The iNodeSetup.exe configuration software works only on Windows with a Bluetooth adapter based on the CSR 8510 chipset or iNode Serial USB Transceiver, iNode LAN.
Usage
- Medicine: patient monitoring, unconsciousness detection, falls and rehabilitation
- Real-time traffic analysis
- Impact and vibration monitoring (shipments, mechanical damage during the warranty period)
- Home automation
You can also buy a USB 4.0 Bluetooth adapter available in our offer .
560412
You might also like
Low Energy Bluetooth adapter module with USB 2.0 connector. allows communication with BLE devices
zł134.38
24h
Available quantity: 1
Available
Low Energy Bluetooth adapter module with 2x4 pin 2.54mm connector, extra / high. RS232 allows communication with BLE devices
zł113.16
24h
Available quantity: 1
Available
Connection of 5MPx camera with JPEG compression with full BLE functionality
Delivery date unknown
No product available!
The module allows the existence of devices with BLE in networks with the Ethernet protocol, has a BT2.1 receiver
zł226.32
24h
Available quantity: 1
Available
USB adapter for PC, allowing Bluetooth v4.0 communication with speeds up to 3Mb / s and range up to 20m
zł19.74
24h
Available quantity: 1
Available
Other products in the same category (16)
The module enables connection of two devices with I2C interface working with different voltage levels. MOD-28.Z
Retired
No product available!
It is used to monitor the temperature measurement and other parameters. The expansion module has an I2C / 1-Wire converter (DS2482) through which DS18B20 temperature sensors can be connected using two or three wires. MOD-29.Z
Retired
No product available!
Power module with IRFR4105Z transistor (MOD-30.Z), maximum current 2A, 5V power supply or 5V - 12V range (selection by jumper)
Retired
No product available!
The module with the DS18B20 sensor is used to measure the temperature in the range from -55° C to + 125° C, with an accuracy of +/- 0.5° C in the range from -10° C to + 85° C. The module communicates via the 1-Wire interface, thanks to which it can be connected using 2 or 3 wires - depending on the configuration. Temperature measurement can be performed with an accuracy of 9 to 12 bits. MOD-31.Z
Retired
No product available!
Universal module with LM358 operational amplifier. Depending on the additional elements installed, the amplifier can be freely configured, eg as a reversing, non-inverting amplifier, voltage follower or an integrating amplifier. MOD-32.Z
Retired
No product available!
No product available!
The modally controlled modulation module MOD-34 / BZ allows wireless load control with a current consumption of up to 10A via a relay. Includes wireless module nRF24l01.
Retired
No product available!
No product available!
No product available!
No product available!
The module with the TXB0108 system enables the connection of systems operating with different voltage levels. It has 8-channels and is 2-way. The transmission direction of each channel is detected automatically. MOD-38.Z
Retired
No product available!
No product available!
The STM32 eXploreM0 module contains a 32-bit microcontroller with ARM Cortex M0 core, STM32F051C8T6 (64 kB Flash memory, 8 kB RAM, 48 MHz, HDMI-CEC, I2C, IrDA, LIN, SPI, UART / USART). The USB / UART converter allows programming of the microcontroller via a USB cable. MOD-40.Z
Retired
No product available!
The STM32 eXploreM0 + module contains a 32-bit microcontroller with ARM Cortex M0 + core, STM32L051C8T6 (64 kB of Flash memory, 8 kB RAM, 32 MHz, I2C, IrDA, SPI, UART / USART). The built-in USB / UART converter enables programming of the microcontroller via a USB cable. MOD-41.Z
Retired
No product available!
No product available!
The RGB LED ruler has 8 programmable LEDs WS2812B with a built-in control system. It is possible to set a specific color for each diode. The module has an IN input for controlling and an OUT output to which further light points or other modules from WS2812B can be connected. The supply voltage is from 3.5 to 5.3 V, and the input voltage +/- 0.5 V of the supply voltage
Retired
No product available!
Wireless motion sensor and magnetic field with built-in event memory (recorder)