- Out-of-Stock
Arduino TIAN (A000116)
ID: 560392
The Arduino TIAN is based on the Atheros AR9342 connected to an Atmel Cortex® M0+ 32-bit microcontroller plus all connectivity: Ethernet, Wi-Fi, Bluetooth. A000116
Description
Arduino TIAN unleashes the power of a small computer running Linux connected to a 32-bit microcontroller.
The Arduino TIAN is based on the Atheros AR9342 connected to an Atmel Cortex® M0+ 32-bit microcontroller plus all connectivity: Ethernet, Wi-Fi, Bluetooth.
The Arduino TIAN is based on the Atheros AR9342 connected to an Atmel Cortex M0+ 32-bit microcontroller plus all connectivity: Ethernet, Wi-Fi, Bluetooth.
The new Arduino Tian board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex? M0+ core and a Qualcomm Atheros AR9342, which is an highly integrated MIPS processor operating at up to 533MHz and feature-rich IEEE802.11n 2x2 2.4/5 GHz dual-band WiFi module. Qualcomm Atheros MIPS supports a Linux distribution, based on OpenWRT named Linino. The Arduino Tian has also a build in 4GB eMMC memory that will can be helpful to build your projects. It is possible to Switch ON/OFF the Linux port from the MCU to reduce the power consumption.
NB: In some countries, it is prohibited to sell WiFi enabled devices without government approval. While waiting for proper certification, some local distributors are disabling WiFi functionality. Check with your dealer before purchasing a Tian if you believe you may live in such a country.
Note: Before starting to run Arduino Tian you need to install CP201x driver on the computer drivers
Features
ARDUINO MICROPROCESSOR
ARDUINO MICROCONTROLLER
GENERAL
- Processor: Atheros AR9342
- Architecture: MIPS
- Operating Voltage: 3.3 V
- Flash Memory: 16 MB + 4 GB eMMC
- RAM: 64 MB DDR2
- Clock Speed: 560 MHz
- WiFi: 802.11 b/g/n 2.4 GHz dual-band
- Ethernet: 802.3 10/100/1000 Mbit/s
- USB: 2.0 Host
ARDUINO MICROCONTROLLER
- Microcontroller: SAMD21G18
- Architecture: ARM Cortex-M0+
- Operating Voltage3.3 V
- Flash memory: 256 KB
- SRAM: 32 KB
- Clock Speed: 48 MHz
- Analog I/O Pins: 6
- DC Current per I/O Pins7mA (I/O Pins)
GENERAL
- Input Voltage: 5 V
- Digital I/O Pins20
- PWM Output: 12
- Power Consumption470 mA
- PCB Size: 53 x 68.5 mm/ 2.08 x 2.69 inches
- Bluetooth: CSR8510, Bluetooth with EDR / BLE 4.0
- Weight: 36g
560392
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Set of 4 mounting plates for Raspberry Pi 4B compatible with 19-inch 3U rack mount. The holder shown in the 3rd picture is not included in the set and must be purchased separately. ArduCAM U6131
Retired
No product available!
Camera module with IMX477 HQ sensor designed for Raspberry Pi Compute Module (CM3, CM3 +, CM4). Equipped with 1/2.3″ lens with M12 mount and 75° viewing angle. ArduCAM B0271
Retired
No product available!
Camera with a USB interface with a resolution of 8 MP. Equipped with a Sony CMOS IMX179 sensor and a wide-angle lens with a viewing angle of 105°. ArduCAM UB0229
Retired
No product available!
1 MPx camera module with OV9281 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter and an IR filter, it is characterized by good sensitivity. ArduCAM B0225
Retired
No product available!
2 MPx camera module with OV2311 sensor working with Raspberry Pi. Equipped with a shutter and M12 lens mount. ArduCAM B0219
Retired
No product available!
2 MPx camera module with OG02B10 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter, it is characterized by good sensitivity. ArduCAM B0199
Retired
No product available!
Camera module 8 MPx with IMX219 sensor and lens with a viewing angle of 75°. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0188
Retired
No product available!
Module with 8 Mpx camera with IMX219 sensor and lens with 75° viewing angle. Designed for Nvidia Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0187
Retired
No product available!
A set with two IMX219 cameras with a resolution of 8 MP and an expansion module for the Raspberry Pi, which allows you to connect two cameras simultaneously. ArduCAM B0350
Retired
No product available!
2 MPx camera module with OG02B10 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter, it is characterized by good sensitivity. Pivariety adapter included. ArduCAM B0348
Retired
No product available!
2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M9 lens mount. Acrylic case included. ArduCAM B0220
Retired
No product available!
The kit includes a module with two cameras with an IMX219 sensor with a resolution of 8 MP and an expansion module for NVIDIA Jetson Nano. ArduCAM B0217J8
Retired
No product available!
Camera module with IMX219 sensor with a resolution of 8 MP equipped with programmable focus, without IR filter. Designed for NVIDIA Jetson Nano and Raspberry Pi CM. ArduCAM B0189
Retired
No product available!
Camera with OV9282 sensor designed for DepthAI systems. Without IR filter. It is a replacement element for DepthAI OAK-D modules. ArduCAM B0299
Retired
No product available!
Two modules with infrared LED lighting for the ArduCAM Raspberry Pi NOIR 5MP OV5647 camera. Can be widely used in wildlife night vision photography, agriculture, etc. ArduCAM B0035LED
Retired
No product available!
Camera with a resolution of 3 MPx with a USB interface. Equipped with CMOS AR0331 sensor with a lens with a viewing angle of 70° and two microphones. ArduCAM UB0237
Retired
No product available!
The Arduino TIAN is based on the Atheros AR9342 connected to an Atmel Cortex® M0+ 32-bit microcontroller plus all connectivity: Ethernet, Wi-Fi, Bluetooth. A000116