- Out-of-Stock
The minicomputer with the Intel Celeron J4115 quad-core processor (2.5 GHz, 64-bit) has 2 slots for DDR4 RAM modules. Additionally, it is equipped with, among others: Gigabit Ethernet, HDMI 2.0 port and Display Port 1.2 4K/60Hz, four USB sockets, 24 GPIO, PCI-e slot, two SATA3 connectors. Rev-B+. ODROID H2+
Odroid H2+ is a minicomputer with an Intel Celeron J4115 quad-core processor (2.5 GHz, 64-bit), has 2 slots for DDR4 RAM memory modules (a list of compatible modules is available at: https://wiki.odroid.com/odroid-h2/hardware/ram). In addition, it is equipped with: Gigabit Ethernet, HDMI 2.0 port and Display Port 1.2 4K/60Hz, four USB ports, 24 GPIO, PCI-e slot and two SATA3 connectors.

| A | CPU (Intel Celeron J4105 Processor) | K | 1 x DisplayPort 1.2 |
| B | 2 x DDR4 SO-DIMM slots (Dual channel memory support) | L | 2 x RJ45 Ethernet Ports (10/100/1000) |
| C | 1 x M.2 PCI Express Module Socket (NGFF-2280) | M | 5 x LED Indicators system |
| D | 1 x eMMC (Embedded Multimedia-Card) Socket | N | 1 x Peripheral Expansion Header (20-pin) |
| E | 2 x SATA Power Connectors | O | 1 x Power Switch |
| F | 2 x SATA3 6.0 Gb / s Data Connectors | P | 1 x Reset Switch |
| G | 1 x DC Power Jack | Q | 1 x Backup Battery Connector (2-pin) |
| H | 2 x USB 3.0 | R | 1 x Active Cooling Fan Connector (4-pin) |
| I | 2 x USB 2.0 | S | 1 x Audio out 1 x Audio in 1 x SPDIF out |
| J | 1 x HDMI 2.0 |
The H2 + version (rev. B+) compared to its predecessor has been equipped with a newer Intel Celeron J4115 processor and Gigabit Ethernet 2500 Mbps support thanks to the RTL8125B chip.
Odroid H2+ works with Ubuntu 20.04.
Manufacturer
Responsible person
This CR2032 allows the system to keep its onboard clock-time ticking when a battery or power supply is disconnected. This battery can keep the RTC running up to 3 years without external power supply. RTC Backup Battery
Best low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 sensor and the Si1132 sensor enables measuring temperature, barometric pressure and humidity, UV Index and ambient light at once
The oCam supports plug-and-play by UVC compliant adapting the standard M12 lens with focal length of 6mm
No product available!
GOODRAM CX400 gen. 2 SSD with a capacity of 256 GB. It is equipped with a SATA III interface, has a 2.5" format. Goodram SSDPR-CX400-256-G2
GOODRAM CX400 gen. 2 SSD with a capacity of 512 GB. It is equipped with a SATA III interface, has a 2.5" format. Goodram SSDPR-CX400-512-G2
No product available!
USB-UART converter for Odroid minicomputers. It is based on the CP2102N chip and is equipped with a USB type C connector
No product available!
Flexible adapter for microSD to SD card with a length of 25 cm. Supports all capacities and card types, including: 16 GB, 32 GB, 64 GB, 128 GB Micro SD/SDHC
No product available!
The expansion module is designed to work with the micro:bit educational board. It allows you to build an electronic piano
No product available!
Black and white e-Paper display with a diagonal of 7.5" and a resolution of 800x480 px. SPI interface. Without PCB. Waveshare 7.5inch e-Paper (G)
No product available!
Board with the WiFi Espressif ESP32-S2 module. Offers 4MB Flash and 8MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-Pico
No product available!
A mini welding machine designed to connect 18650 type battery cells
No product available!
Brushless motor driver module with current efficiency up to 20 A. It can work with LiPo 3S and 4S packages. BLHeli XSD20A
No product available!
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes with a 2.54 mm pitch with marked pins. SB Components 21499
No product available!
Prototyping kit dedicated to Raspberry Pi Pico. It offers the pins of all RPi Pico pins, a contact plate, buttons, LEDs and a buzzer. SB Components 20843
No product available!
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes and two areas of 8x20 holes with a pitch of 2.54 mm with marked pin labels. SB Components 21505
No product available!
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. SB Components 21314
No product available!
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 120 V AC or 24 V DC and currents up to 2 A. SB Components 21376
No product available!
1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277
No product available!
4-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21178
No product available!
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets (one male and one female) of 2x20 pin strips. SB Components 20812
No product available!
Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22663
No product available!
Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22670
No product available!
The minicomputer with the Intel Celeron J4115 quad-core processor (2.5 GHz, 64-bit) has 2 slots for DDR4 RAM modules. Additionally, it is equipped with, among others: Gigabit Ethernet, HDMI 2.0 port and Display Port 1.2 4K/60Hz, four USB sockets, 24 GPIO, PCI-e slot, two SATA3 connectors. Rev-B+. ODROID H2+