- Out-of-Stock
Filament ROSA3D PLA Starter 1.75mm Neon Green
ID: 587766
5907753130792
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Neon Green
Description
1.75 mm PLA filament for 3D printing by ROSA3D. 0.8 kg of filament is wound on the spool. The recommended printing temperature is in the range from 185°C to 225°C, and the bed temperature during printing in the range of 40°C - 60°C, however, when using adhesives, heating the bed is not necessary.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PLA Starter from Rosa3D was designed for beginner users of 3D printers. The simplicity of PLA Starter printing will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects.
PLA is the basic material used in 3D printing. PLA Starter is characterized by low shrinkage and no unpleasant odor. The prints are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food.
Features
- Color: Neon Green
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02 mm
- Printing temperature: 185°C to 225°C
- Bed temperature: 40°C to 60°C (when using washers or other means to increase the adhesion heating of the table is not required)
- Density 1.24 g/cm3
- Odorless smell
- Elongation at tensile 6%
- Tensile strength (to break) 53 MPa
- Modulus of elasticity at tensile 3500 MPa
- Heat deformation temperature 55°C
- Net weight: 0.8 kg
587766
Data sheet
- Rodzaj filamentu
- PLA
- Ilość filamentu
- 0,8 kg
- Diameter
- 1,75 mm
- Colour
- Green
You might also like
3D printer with dual color print and heated table. The printer is fully assembled and ready to use. Flashforge Creator PRO
Regular pricezł4,365.91zł3,199.00
24h
Available quantity: 1
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.40
24h
Available quantity: 73
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł47.70
24h
Available quantity: 1
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł54.46
24h
Available quantity: 94
Available
3D printer with two extruder and a heated table. It is fully assembled and ready to use. Flashforge Creator Pro 2
Regular pricezł5,292.28zł3,999.00
24h
Available quantity: 1
Available
Other products in the same category (16)
A simple unipolar stepper motor driver assembled. AVT1814 C
Retired
No product available!
No product available!
JTAG programmer-emulator for MSP430Fxxxx microcontrollers (MSP-JTAG)
Delivery date unknown
No product available!
No product available!
Single Chassis Completion Kit for RRC01A
Retired
No product available!
Camera with a resolution of 1 MPx with a USB interface. Equipped with a GC1024 CMOS sensor with a 68° angle of view lens. ArduCAM U6061
Retired
No product available!
No product available!
No product available!
The SanDisk Ultra microSDHC 32GB 100MB/s C10 memory card is an efficient and reliable high-capacity storage medium, offering fast data transfer, compatibility with various devices and resistance to harsh conditions, ideal for smartphones, tablets, sports cameras or drones. SanDisk SDSQUNR-032G-GN3MN
Retired
No product available!
Module with ACeP e-Paper 7-color display with a diagonal of 5.65" and a resolution of 600×448 px. SPI interface. Waveshare 5.65inch e-Paper Module (F)
Retired
No product available!
Side panel with sensors for Totem Mini Lab and Totem Micro Lab sets. The board has a microphone, OLED display, DH11 humidity sensor, NTC thermistor, buzzer and a DC motor control module. Totem TE-SP02-B
Retired
No product available!
The MT9P001 CMOS sensor camera module offers 5MP resolution and high image quality thanks to DigitalClarity™ technology, even in low light. The camera supports global shutter, snapshot mode, and long exposure, enabling precise exposure control and capturing dynamic scenes. Its compact size, low power consumption, and wide range of configuration features make it an ideal choice for advanced DIY projects and image processing systems. ArduCAM B0127
Retired
No product available!
The Fire Truck is a self-propelled wooden model from the new UGEARS Trucks collection. Intelligent design mixed with smart engineering inside. The Fire Truck functions like a real Rescue& Fire Truck with turning foot, moving apart & ascending ladder, which transforms into real crane with hook. UGears 70022
Retired
No product available!
Zhuomin Zhang, Benjamin Tsai, Graham Machin
Delivery date unknown
No product available!
Jacek Augustyn
Delivery date unknown
No product available!
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Neon Green