- Out-of-Stock
Filament ROSA3D PET-G Standard 1.75mm Transparent 3kg
ID: 587816
5907753130006
ROSA3D filament made of high-quality PET-G granules. 3 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Transparent
Description
1.75 mm PET-G filament for 3D printing by ROSA3D. 3 kg of filament is wound on the spool. The recommended printing temperature is in the range from 220°C to 260°C, and the temperature of the bed during printing in the range of 60°C - 80°C.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PET-G Standard dedicated to people who deal with amateur and professional 3D prints. It will be used in the creation of prototypes and large-format prints.
Filament PET-G Standard from ROSA3D is characterized by the ease of printing comparable to PLA. The details are characterized by precise details, good adhesion to the work table, odorlessness and a low level of shrinkage. Printouts are distinguished by high chemical resistance. They can be sanded, drilled, sawn, sanded, cut and painted without compromising the structural integrity of the component. The PET-G Standard filament is made of raw materials that are approved for contact with food.
Features
- Color: Transparent
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 220°C to 260°C
- Bed temperature: 60°C to 80°C
- Density: 1.29 g/cm3
- Odorless: smell
- Elongation at tensile 5.5%
- Tensile strength (to break) 47 MPa
- Tensile modulus is 2980 MPa
- Impact strength according to the Izod method with a notch of 4.7 kJ/m2
- Vicat softening point 78 °C
- Net weight: 3 kg
587816
Data sheet
- Rodzaj filamentu
- PET-G
- Ilość filamentu
- 3 kg
- Diameter
- 1,75 mm
- Colour
- Transparent
You might also like
Easy-to-use and intuitive 3D printer with touch display and USB, WiFi and intelligent door support. The printer is fully assembled and ready to use. Flashforge Inventor IIS
Regular pricezł3,704.21zł1,999.00
24h
Available quantity: 1
Available
Easy PET-G filament in blue with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Blue
zł75.01
24h
Available quantity: 1
Available
Easy PET-G filament in silver with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Silver
zł85.01
24h
Available quantity: 1
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.40
Delivery date unknown
No product available!
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł54.30
24h
Available quantity: 267
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł48.55
24h
Available quantity: 249
Available
Other products in the same category (16)
Camera module based on the OV13850 CMOS matrix with a resolution of 4224x3136 px (13 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0129
Retired
No product available!
ArduCAM OV9281 1MP Global Shutter USB Camera Evaluation Kit - Evaluation Kit with 1MP OV9281 166°...
A set with a camera with a resolution of 1 MPx with an OV9281 sensor, a USB 3.0 adapter and a cable. ArduCAM EK024
Retired
No product available!
Module with USB 2.0 interface dedicated to ArduCAM cameras. Supports sensors with MIPI interface. Has a built-in 16 MB hardware frame buffer. ArduCAM B0175
Retired
No product available!
Micro analog servo with plastic gear. It has a range of motion of 90°. GH-S37A
Retired
No product available!
GSM/GPRS + GPS module based on the RDA8955 chip. It integrates protocol stacks such as GSM/GPRS and supports the basic functions of voice calls, SMS and GPS data transmission. DFRobot TEL0134
Retired
No product available!
Aluminum case for minicomputer Raspberry Pi 4 model B, black color
Retired
No product available!
Module with 7-color ACeP e-Paper display, 5.65" diagonal and 600x448 px resolution. Communication via SPI interface. Waveshare Pico-ePaper-5.65
Retired
No product available!
HAT module with RTC DS3231SN clock and MAX705 reset system designed for Raspberry Pi and Jetson Nano. The board has a CR1220 battery socket and a C-type USB connector. Waveshare RTC WatchDog HAT
Retired
No product available!
The expansion module is designed to work with a portable computer built into the Raspberry Pi 400 keyboard. The board has two 40-pin connectors placed in a vertical position and a connector for RPI 400 at an angle of 45 °. Waveshare PI400-GPIO-ADAPTER-C
Retired
No product available!
The power supply module with the RTC DS3231SN clock is designed for the Raspberry Pi. It allows you to power minicomputer with voltage up to 28 V and create scripts for the power-on sequence. Pimoroni WITTY_PI_3_R2
Retired
No product available!
Module of the 8-channel I2C expander based on the TCA9548A system. It enables communication with many I2C devices that have the same address. Pimoroni 8086-006
Retired
No product available!
Mini board with RP2040 microcontroller equipped with two ARM Cortex-M0+ 133 MHz cores, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. PIM577
Retired
No product available!
Module with a black and white e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. SPI interface. Pimoroni PIM368
Retired
No product available!
Metal case with fan for Raspberry Pi 4 model B in black
Retired
No product available!
Green, aluminum case for Raspberry Pi 4 model B. It has been equipped with mounting holes of the VESA 75 standard
Retired
No product available!
Universal organizer with 36 compartments. Allows you to store small parts and tools. BOX0001
Retired
No product available!
ROSA3D filament made of high-quality PET-G granules. 3 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Transparent