- Out-of-Stock
New products
New products New products
zł301.74
24h
Dostępny
Available
Available
zł59.04
24h
Available
Filament ROSA3D BioWOOD 1.75mm Brown 0.5kg
ID: 587821
5907753130099
ROSA3D filament made of high-quality biopolymer with wood particles. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D BioWOOD
Description
ROSA3D BioWOOD filament for 3D printing with a diameter of 1.75 mm. 0.5 kg of filament is wound on the spool. The recommended printing temperature is in the range of 170°C to 210°C, and the temperature of the bed during printing in the range of 30°C to 50°C, however, when using adhesives, heating the bed is not necessary.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and high accuracy of the diameter and roundness of the filament.
The BioWOOD FILAMENT is made of a biopolymer consisting of 100% natural and 100% renewable resources. They are decomposed in the composting process. The material has a wide range of applications, from decorative elements, through dishes (bowls, plates, cups, cutlery) to use in the creation of musical instruments, toys and furniture. Printouts can be mechanically processed (sanded, turned, drilled, etc.) as well as painted and varnished.
Attention!
Due to the content of wood fibers, the manufacturer recommends using a printing nozzle with a diameter of at least 0.5 mm.
Features
- Color: Brown
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 170°C to 210°C
- Bed temperature: 30°C to 50°C
- Recommended nozzle diameter: from 0.5 mm
- Density 1.26 g/cm3
- Woody fragrance
- Elongation at tensile 3%
- Tensile strength (to break) 34 MPa
- Tensile modulus 3200 MPa
- Vicat softening temperature 50°C
- Charpy impact strength 15 kJ/m2
- Net weight: 0.5 kg
587821
Data sheet
- Rodzaj filamentu
- BIO
- Ilość filamentu
- 0,5 kg
- Diameter
- 1,75 mm
- Colour
- Brązowy
You might also like
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.40
24h
Available quantity: 51
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł45.85
24h
Available quantity: 112
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł54.46
24h
Available quantity: 1
Available
An advanced 3D printer that offers unique multi-color printing capabilities thanks to the Automatic Material System (AMS). It supports a wide range of filaments, including PLA, PETG, TPU, ABS, as well as carbon fiber-reinforced polymers, ensuring a maximum hot end temperature of up to 300°C and a print speed of up to 500 mm/s. The device is equipped with advanced features such as Bambu Micro Lidar, a chamber monitoring camera and power loss recovery, making it an ideal solution for demanding industrial and hobby projects. Bambu Lab X1-Carbon Combo
zł6,653.16
Delivery date unknown
No product available!
Other products in the same category (16)
Switch mode power supply with 12V output voltage and 1A current. It has a DC 5.5x2.1 plug and an EU plug. The power supply has built-in overload, overvoltage and short-circuit protection. ESPE-1212-W2E
Retired
No product available!
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Jungle
Retired
No product available!
No product available!
CraftBot FLOW IDEX 3D printer made of the highest quality components, with a filament sensor, semi-automatic calibration and wireless connectivity. Thanks to its intuitive operation, the printer will be perfect for both professionals and beginners
Retired
No product available!
No product available!
MYIR MYC-JA5D44 is a single-board computer in the form of a card with SO-DIMM 200-pin connector. The SAMA5D44 processor from Atmel, based on Cortex-A5 cores, has been equipped. It can work with a maximum frequency of 600 MHz. It has 512 MB of DDR2 SDRAM, 512 MB of NAND Flash memory. GPIO ports, interfaces have been derived on the SO-DIMM 200-pin connector.
Retired
No product available!
No product available!
Adamczak Stanisław
Delivery date unknown
No product available!
No product available!
HK Hobbyking X-Car 60A Brushless Car ESC (sensored/sensorless) (28375)
Retired
No product available!
Anna Kordowicz-Sot
Delivery date unknown
No product available!
Turnigy HAL (Heavy Aerial Lift) - 585 mm quadcopter frame (HK22732)
Retired
No product available!
Tin LP with a diameter of 2mm on a spool, weight 100g. Stop Sn60Pb40
Retired
No product available!
At the Feather 32u4\'s heart is at ATmega32u4 clocked at 8 MHz and at 3.3V logic. 32K of flash and 2K of RAM, with built in USB so not only does it have a USB-to-Serial program & debug capability built in with no need for an FTDI-like chip, it can also act like a mouse, keyboard and USB MIDI device. Adafruit 3027
Retired
No product available!
Filament from ROSA3D made of high-quality PLA pellets. Placed on a cardboard thimble, on which 1 kg of 1.75 mm diameter filament is wound. ROSA3D ReFill PLA Starter Green
Retired
No product available!
ROSA3D filament made of high-quality biopolymer with wood particles. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D BioWOOD