- Out-of-Stock
Filament ROSA3D PET-G Standard 1.75mm Army Green
ID: 587907
5907753131690
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Army Green
Description
1.75 mm PET-G filament for 3D printing by ROSA3D. 0.8 kg of filament is wound on the spool. The recommended printing temperature is in the range from 220°C to 260°C, and the temperature of the bed during printing in the range of 60°C - 80°C.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PET-G Standard dedicated to people who deal with amateur and professional 3D prints. It will be used in the creation of prototypes and large-format prints.
Filament PET-G Standard from ROSA3D is characterized by the ease of printing comparable to PLA. The details are characterized by precise details, good adhesion to the work table, odorlessness and a low level of shrinkage. Printouts are distinguished by high chemical resistance. They can be sanded, drilled, sawn, sanded, cut and painted without compromising the structural integrity of the component. The PET-G Standard filament is made of raw materials that are approved for contact with food.
Features
- Color: Army Green
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 220°C to 260°C
- Bed temperature: 60°C to 80°C
- Density: 1.29 g/cm3
- Odorless: smell
- Elongation at tensile 5.5%
- Tensile strength (to break) 47 MPa
- Tensile modulus is 2980 MPa
- Impact strength according to the Izod method with a notch of 4.7 kJ/m2
- Vicat softening point 78 °C
- Net weight: 0.8 kg
587907
Data sheet
- Rodzaj filamentu
- PET-G
- Ilość filamentu
- 0,8 kg
- Diameter
- 1,75 mm
- Colour
- Green
You might also like
Easy-to-use and intuitive 3D printer with touch display and USB, WiFi and intelligent door support. The printer is fully assembled and ready to use. Flashforge Inventor IIS
Regular pricezł3,704.21zł1,999.00
24h
Available quantity: 1
Available
Easy PET-G filament in black with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Black
zł75.03
24h
Available quantity: 1
Available
Easy PET-G filament in Onyx with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Onyx
zł85.01
24h
Available quantity: 1
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.40
Delivery date unknown
No product available!
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł48.55
24h
Available quantity: 253
Available
Other products in the same category (16)
With the Pmod Adapter for myRIO, you can now connect your myRIO to the expansive selection of Pmods offered by Digilent. 6002-410-013
Retired
No product available!
KAmodEPAPER is a module with a clear and energy-saving EPD (e-Paper) display of the GDE035A3 series. Thanks to the derived control signals and integrated in the inverter module, the display control is simple and no additional power lines are required
Retired
No product available!
The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module.
Retired
No product available!
The GP2Y0A60SZ offers a wide detection range of 4″ to 60″ (10cm to 150cm) and a high update rate of 60Hz. The distance is indicated by analog voltage - only a single analog input is required to interface with the module. Pololu 2476
Retired
No product available!
Shield for STM32 Nucleo with WiFi module b / g / n SPWF01SA. The module\'s firmware allows you to work as a client and UDP / TCP server, a web server, supports TCP / IP, TLS / SSL protocols. There are 16 GPIO lines available
Retired
No product available!
Shield X-NUCLEO-IHM09M1 from ST allows you to connect BLDC motor driver modules for STM32 Nucleo tiles
Retired
No product available!
STM32 Nucleo-144 development board with STM32F746ZGT6 MCU, supports Arduino, ST Zio and Morpho
Retired
No product available!
STM32 Nucleo-144 development board with STM32F429ZIT6 MCU, supports Arduino, ST Zio and Morpho
Retired
No product available!
The ST25TA02KB-P is a dynamic NFC/RFID tag IC with a digital General Purpose Output (GPO), embedding a 2 Kbit EEPROM that supports NDEF tag applications for NFC Forum Type 4
Retired
No product available!
Gearmotor is a powerful 12V brushed DC motor with a 50:1 metal gearbox and an integrated quadrature encoder
Retired
No product available!
Particle Photon is an IoT module with an ARM microcontroller (Cortex-M3) and a WiFi module. The module has a 2.54 mm goldpin connector. WRL-13774
Retired
No product available!
SBC computer with SoC Allwinner H8 (8-core Cortex-A7 2 GHz, PowerVR SGX544MP) equipped with: in 2 GB RAM memory, 8 GB eMMC memory, WiFi a / b / g / n, Bluetooth, SATA 2.0 interface
Retired
No product available!
No product available!
Mains power supply 5V, 1A, cable terminated with a mini-USB plug. DC / 230V AC
Retired
No product available!
The module contains two tiny cores, an x86 (Quark) and a 32-bit ARC architecture core, both clocked at 32MHz. The Intel toolchain compiles your Arduino sketches optimally across both cores to accomplish the most demanding tasks
Delivery date unknown
No product available!
Particle Photon is an IoT module with an ARM microcontroller (Cortex-M3) and a WiFi module
Retired
No product available!
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Army Green