.png)
- Out-of-Stock
Filament ROSA3D PLA-Silk 1.75mm Silver
ID: 588212
5907753131829
ROSA3D filament made of high-quality PLA-Silk granules characterized by intense color and exceptional gloss. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. Filament ROSA3D PLA-Silk Silver
Description
1.75 mm PLA-Silk filament for 3D printing by ROSA3D. 0.8 kg of filament is wound on the spool. The recommended printing temperature is in the range from 185°C to 225°C, and the bed temperature during printing in the range of 40°C - 60°C, however, when using adhesives, heating the bed is not necessary.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PLA Starter from Rosa3D was designed for beginner users of 3D printers. The simplicity of PLA Starter printing will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects.
PLA-Silk is a durable and easy-to-use filament characterized by intense color and exceptional gloss. It is characterized by low shrinkage and no unpleasant odor. The prints are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a mixture of plastics based on the biodegradable PLA biopolymer. It was made only of ingredients approved for contact with food. PLA-Silk can be printed with the same settings as PLA Starter. There is no need to slow down the printing speed. The filament is shiny already on the spool, the gloss does not only arise during printing, so it allows quite a lot of freedom in choosing the temperature. Nevertheless, we always recommend that you print the temperature tower first.
Features
- Color: Silver
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +0.02 mm
- Printing temperature: 185°C to 225°C
- Bed temperature: 40°C to 60°C (when using washers or other means to increase the adhesion heating of the table is not required)
- Density 1.24 g/cm3
- Odorless smell
- Elongation at tensile 6%
- Tensile strength (to break) 53 MPa
- Modulus of elasticity at tensile 3500 MPa
- Heat deformation temperature 55°C
- Net weight: 0.8 kg
588212
Data sheet
- Rodzaj filamentu
- PLA
- Ilość filamentu
- 0,8 kg
- Diameter
- 1,75 mm
- Colour
- Srebrny
You might also like
Anthracite R PLA filament with a diameter of 1.75 mm. 0.85 kg of filament is wound on the spool. Fiberlogy R PLA Anthracite
zł51.00
24h
Available quantity: 2
Available
3D printer with a filament sensor and colorful LED backlight. For self-assembly, included with the necessary accessories. BIQU B1
Regular pricezł1,099.01zł639.60
24h
Available quantity: 3
Available
Other products in the same category (16)
Pololu engine with 48 CPR encoder, with 4.4: 1 transmission, standard 12 V voltage and 2250 rpm. Pololu 3213
Retired
No product available!
This gearmotor consists of a high-power, 12 V brushed DC motor combined with a 9.68:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 464.64 counts per revolution of the gearbox’s output shaft.
Retired
No product available!
This gearmotor consists of a high-power, 12 V brushed DC motor combined with a 46.85:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 2248.86 counts per revolution of the gearbox’s output shaft.
Retired
No product available!
This gearmotor consists of a high-power, 12V brushed DC motor combined with a 74.83:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 3591.84 counts per revolution of the gearbox’s output shaft. Pololu 3218
Retired
No product available!
This gearmotor consists of a low-power, 6 V brushed DC motor combined with a 4.4:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 211.2 counts per revolution of the gearbox’s output shaft.
Retired
No product available!
This gearmotor consists of a medium-power, 12 V brushed DC motor combined with a 9.68:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 464.64 counts per revolution of the gearbox’s output shaft.
Retired
No product available!
Low-power, 12 V brushed DC motor combined with a 9.68:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 464.64 counts per revolution of the gearbox’s output shaft. Pololu 3262
Retired
No product available!
Wireless, precise pressure, temperature and humidity sensor with built-in event memory
Retired
No product available!
Wireless, precision, high accuracy pressure and temperature sensor with built-in event memory
Retired
No product available!
Wireless, precision temperature sensor with high accuracy with built-in recorder and K-type thermocouple up to 260 ° C
Retired
No product available!
Compact servo designed for use in the Bolide Y-01 Advanced Humanoid Robot humanoid robot. Thanks to its high torque, it can be used in walking robots (Hexapod) or robotic arms. Pololu 3400
Retired
No product available!
PCB and programmed circuit for remote control switch with two relays. AVT5551 A +
Delivery date unknown
No product available!
AVT kit for self-assembly of a remotely controlled switch with two relays. AVT5551 B
Delivery date unknown
No product available!
Assembled, remote controlled switch with two relays. AVT5551 C
Retired
No product available!
PCB with programmed circuit for assembly of the operating time counter triggered by the current flow. AVT5548 A +
Retired
No product available!
AVT kit for self-assembly of a work time counter triggered by current flow. AVT5548 B
Retired
No product available!
ROSA3D filament made of high-quality PLA-Silk granules characterized by intense color and exceptional gloss. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. Filament ROSA3D PLA-Silk Silver