- Out-of-Stock
PmodCON2 - BNC connectors
The Digilent PmodCON2 Module Board makes it easy to connect a Digilent system board to outside devices with BNC plugs. It is ideal for testing a Digilent system board with equipment that uses BNC connections.
The CON2 conveys signals between a 6-pin header and two BNC jacks. It uses jumpers to specify which of the 6-pin connector pins correspond to each BNC jack.
The CON2 has a 6-pin header for easy connection to a Digilent system board. For example, some system boards like the Digilent Pegasus board have a 6-pin header that can connect to the CON2 with a 6-pin cable. To connect the CON2 to other Digilent system boards, a Digilent Modular Interface Board (MIB) and a 6-pin cable are needed. The MIB plugs into the system board, and the cable connects the MIB to the CON2.
Key Features:

Code: 210-066
Manufacturer
Responsible person
Analog Discovery BNC Adapter Board (410-263P)
Precision amplifier designed to measure the current on the shunt resistor in the SOT23-5 housing. STMicroelectronics TSC101AIYLT
No product available!
A double operational amplifier with a large bandwidth in the MiniSO-8 housing. STMicroelectronics TSV912AIYST
No product available!
TSV612IST, Rail to rail input/output 5V CMOS Op-Amps, micro-power (10uA), GBP=120kHz, dual, Mini SO8
No product available!
No product available!
TSV631ILT, Rail-to-rail input/output, 60 µA, 880 kHz, 5 V CMOS operational amplifiers, SOT-23-5
No product available!
No product available!
A small single board computer with a Sitara ™ processor (1 GHz, ARM Cortex-A8), 512 MB DDR3 RAM. It has a built-in 3D accelerator. The board also includes a microSD card slot and a microUSB slot.
No product available!
TSZ182IYST, Very high accuracy (25 µV) high bandwidth (3 MHz) zero drift 5 V operational amplifiers, Mini SO8
No product available!
Raspberry Pi Compute Module 3+ (CM3 +) is a SoM module containing key elements of the Raspberry Pi 3 A + / B + computer, including Broadcom BCM2837B0 processor, 1 GB RAM, 8 GB eMMC memory. The module is equipped with a 200-pin SODIMM connector.
No product available!
Orange Pi 3 1GB is a mini-computer equipped with SoC Allwinner H6 (quad-core, frequency up to 1.8 GHz, 64-bit architecture, ARM Cortex ™ -A53 core). It has 1GB RAM (LPDDR3), Mali T720 graphics. On the board you can run Android 7.0 and Linux (Ubuntu, Debian).
No product available!
Orange Pi 3 2GB is a mini-computer equipped with SoC Allwinner H6 (quad core, frequency up to 1.8 GHz, 64-bit architecture, ARM Cortex ™ -A53 core). It has 2GB RAM (LPDDR3), Mali T720 graphics. On the board you can run Android 7.0 and Linux (Ubuntu, Debian).
No product available!
A small evaluation board with the nRF52840 (ARM Cortex-M4) system designed for projects related to Mesh networks. Adafruit 3999
No product available!
Orange Pi 3 1GB is a mini-computer equipped with SoC Allwinner H6 (quad-core, frequency up to 1.8 GHz, 64-bit architecture, ARM Cortex ™ -A53 core). It has 1GB RAM (LPDDR3), Mali T720 graphics chip, 8GB eMMC memory. The board can run Android 7.0 and Linux.
No product available!
Orange Pi 3 2GB for minicomputer equipped with SoC Allwinner H6 (quad-core, frequency up to 1.8 GHz, 64-bit architecture, ARM Cortex ™ -A53 core). It has 2 GB of RAM (LPDDR3), a Mali T720 graphics chip, 8 GB of eMMC memory. The board can run Android 7.0 and Linux.
No product available!
Module with a UV ultraviolet light sensor VEML6075. Enables measurement of the level of UVA (320-400nm) and UVB (280-320nm) radiation. It communicates via the I2C bus. SparkFun SEN-15089
No product available!
SanDisk Extreme microSDHC memory card with a capacity of 32GB, maximum reading speed up to 100 MB / s, U3 UHD class
No product available!
PmodCON2 - BNC connectors