- Out-of-Stock
A set for building an educational robot controlled with a micro:bit module. A great solution to introduce children to the world of programming and robotics. The easy-to-use device, programmed with a transparent block interface, will not only be an interesting toy, but above all a platform for developing the child's skills and interests.
The structure of the vehicle is based on a set of bricks and 4 engines compatible with LEGO. The robot is equipped with 4 Swedish type wheels, thanks to which it can move sideways and diagonally.
The micro:bit module is responsible for controlling the robot. It is plugged into the magic: bit expansion board, which has a built-in DC motor driver, LED backlight, IR receiver and a power supply and charging system based on a Li-Ion 18650 battery.
Attention!
The set does not include the micro:bit module and the Li-Ion 18650 battery. They must be purchased separately.The robot is programmed using the MakeCode application. It can be controlled by a mobile application or by using the IR remote control included in the set.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
18650 Li-Ion battery with a nominal voltage of 3.7V and a capacity of 3000mAh. Sony US18650VTC6
Li-Ion 18650 battery with a nominal voltage of 3.7V and a capacity of 2600mAh. It has protection against overcharging, excessive discharge, overload and short circuit.
Li-Ion 18650 battery with a nominal voltage of 3.6V and a capacity of 3500mAh. It has protection against overcharging, excessive discharge, overload and short circuit.
No product available!
Module with WM8960 audio decoder that allows you to operate 1 W stereo speakers and two microphones via the I2S interface. Adafruit 4757
No product available!
Module with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769
No product available!
Wireless temperature and humidity sensor. It allows you to track changes in temperature and humidity in your home. Shelly H&T BLACK
No product available!
High voltage differential probe. It is characterized by good measurement parameters: with a 100 MHz band and an operating voltage up to 700 V. The probe has two attenuation factors: 10X and 100X. Micsig DP10007
No product available!
The expansion board with the LoRaWAN SX1302 and GNSS L76B module is dedicated to Raspberry Pi minicomputers. The kit includes the 868M antenna, GPS and necessary cables. Waveshare SX1302 LoRaWAN Gateway HAT
No product available!
The module with the LoRaWAN ASR6501 system and an external antenna, designed for the M5Stack sets. M5Stack U117
No product available!
The LoRaWAN SX1302 module is equipped with a Mini-PCIe connector. It uses the SPI or I2C interface for communication. Waveshare SX1302 868M LoRaWAN Gateway
No product available!
Alkaline battery A27 12V 7.6x27.3 mm with a capacity of 25 mAh
No product available!
Black ABS ESD filament with a diameter of 1.75 mm. 0.75 kg of filament is wound on the spool. Fiberlogy ABS ESD Black
No product available!
Graphic display 128 x 64 pixels, 68.7 x 48.5 mm, Type: COG, FSTN, reflective (without backlight), ST7565R. Artronic LCD-AG-C128064CF-FGN NO/-E6
No product available!
A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a BC2 tip
No product available!
Universal EEPROM, Flash (NAND and NOR), eMMC, SRAM and MCU memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. XGecu T56
No product available!
3DDescriptionprinter with the function of auto-leveling the bed, resuming printing and filament sensor. A kit for self-assembly. Anet ET4
No product available!
3D printer with the function of auto-leveling the bed, resuming printing and filament sensor. A kit for self-assembly. Anet ET4 PRO
No product available!
Universal EEPROM, Flash NAND, SRAM and MCU memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. TL866II Plus
No product available!
Universal EEPROM and Flash serial memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. SOFI SP8-A
No product available!
A set for building an educational robot controlled with a micro:bit module. The construction of the vehicle is based on a set of bricks and the magic:bit expansion board