micro:Maqueen Lite - educational robot with micro:bit (white)

Pololu Robot Chassis RRC01A Solid Red

Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.9 V, and draws a current of 0.6 A per coil. Pololu 1204

A set for building a mobile robot based on a tracked platform. It consists of the AI Huskylens camera, Devastator Tank chassis and Romeo V2 controller. DFRobot SEN0305-2

Accessory kit for building an autonomous racing robot based on the NVIDIA Jetson Nano. Waveshare JetRacer AI Kit A

Kit for building an intelligent JetBot based on Jetson Nano. It consists of an expansion module, a camera with a LIDAR image sensor, motors, a chassis and a 9-axis IMU. Waveshare JetBot ROS AI Kit Acce

High-power brushed DC motor with a 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch. Pololu 1511

The basis of the Romi chassis dedicated to the construction of small, two-wheeled mobile robots with two-wheel drive. Pololu 3512

HK Turnigy TGY-5521MDHV High Voltage Metal Gear Digital Servo 24kg / 0.11sec / 60g (24577)

100:1 Micro Metal Gearmotor MP

Motor with 25 mm diameter and 67 mm length, 47:1 metal gear, 12 V operating voltage, 0,2 A to 2,1 A power consumption, 160 RPM speed, 6 maximum torque and 48 CPR encoder. Pololu 4865

Motor with 25 mm diameter and 69 mm length, 99:1 metal gear, 12 V operating voltage, 0,2 A to 2,1 A power consumption, 76 RPM speed, 12 maximum torque and 48 CPR encoder. Pololu 4867

A small medium-power motor with a 5:1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 4400 RPM and a maximum torque of 0.06 kg * cm. Pololu 2362

Aluminum platform for building a mobile robot. Numerous holes were made in the plate to facilitate the assembly of motors and electronics

A small, high-power motor with a 1000: 1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 35 RPM, a maximum torque of 10 kg * cm and carbon brushes with increased durability. Pololu 3046

Motor with a diameter of 37 mm and a length of 76.5 mm, with a gearbox of 131:1, a working voltage of 12 V, a current consumption from 1.1 A to 6 A, a speed of 110RPM and a maximum torque of 19 kg*cm. JGB37-550

This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.