micro:Maqueen - educational robot with micro:bit + loader
ID: 581466
5902186314580
zł250.34
Tax included
zł203.53 tax excl.
A set for building an interactive robot based on a micro: bit module with a front loader. It can be programmed with tools such as Mind+, Scratch, MakeCode and MicroPython. DFRobot ROB0156-L-1
Description
micro: Maqueen Plus is a set for building an interactive robot. It is a small and inexpensive intelligent device equipped with a number of functionalities that will inspire and help you learn new technologies. The user learns the basics of robotics and computer science while improving and coding the robot. micro: Maqueen is based on the popular micro:bit module. The robot is programmed from a computer using such environments as Mind+, Scratch, MakeCode and MicroPython.
The set includes a micro:Maqueen platform (chassis with motors, distance sensor, battery basket, necessary mounting elements) and a servo-controlled front loader. The kit is easy to use and it only takes a few minutes to assemble it. The robot is equipped with numerous sensors that allow it to interact with the device. The robot platform can be controlled by a wireless GamePad.
Attention!
he kit does not include the micro:bit module and Li-Ion 18650 battery. They must be purchased separately.
| 1. Infrared grayscale sensors | 6. Ultrasonic sensor |
| 2. Buzzer | 7. I2C |
| 3. Infrared receiver | 8. Servo port |
| 4. LED | 9. Expansion ports |
| 5. RGB LED | 10. micro:bit socket |
Features
micro:Maqueen
- Gear ratio: 1:150
- Maximum rotation speed: 133 rpm
- Motor control by PWM signal
- Two reflection sensors
- Buzzer
- Infrared receiver (NEC coding)
- Two LED indicator lights
- Four programmable RGB LEDs
- Ultrasonic sensor SR04, SR04P (4-pin connector, 5V)
- I2C interface
- Programming Tool:
- MakeCode online editor
- Mind+ (based on Scratch 3.0)
- Power supply: 3.5 to 5V DC (3 AAA batteries or 3.7V lithium battery)
- Dimensions: 81 × 85 × 44 mm
- Weight: 75.5 g (without batteries and micro: bit plate)
Loader
- Servo rotation angle: 0° to 180°
- Metal gear
- Metal plate that connects the servo
- Control ports: S1, S2, S3 (Maqueen Plus)
- Standby current consumption: up to 45 mA
- Servo weight: 12 g
Kit contains
- The micro:Maqueen educational platform
- Front-end loader:
- Servo with metal gear
- Metal charger
- Metal plate that connects the servo
- 2 x Distance M3 x 15 mm
- 5 x M2.5 x 5mm screws
- 8 x M3 x 5mm screws
581466
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Kit for building a simple educational robot Maqueen micro:bit chassis with engines, distance sensor, battery basket and necessary assembly elements. DFRobot ROB0148
zł213.36
24h
Available quantity: 7
Available
Panasonic Eneloop PRO R03/AAA rechargeable batteries with a minimum capacity of 930mAh and a voltage of 1.2V. The set contains two pieces sold in blister packaging. Panasonic BK-4HCDE/2BE
zł41.52
24h
Available quantity: 3
Available
GP Super AAA battery (R3, LR03, small) 6 pieces, 1.5V
zł16.90
24h
Available quantity: 4
Available
A set for building an interactive robot based on the micro: bit module. It can be programmed using tools such as Mind+, Scratch, MakeCode and MicroPython. DFRobot MBT0021-EN
zł368.41
24h
Available quantity: 1
Available
Educational micro:bit module with 32-bit ARM Cortex-M4 microcontroller. Manufactured to interest the youngest in computer engineering. SparkFun DEV-17287
zł72.90
24h
Available quantity: 10
Available
Set of 8 Panasonic Eneloop R3/AAA rechargeable batteries with 800 mAh capacity and 1.2V voltage. Packaged in eco-friendly packaging (blister). Panasonic BK-4MCDE/8BE
zł93.76
Delivery date unknown
No product available!
The Akyga AKY1970 alkaline battery (AAA, LR03) with a voltage of 1.5V and a capacity of 1300 mAh provides long-lasting power for everyday devices. The package contains 10 batteries, making it an economical solution for users needing a reliable power source.
zł10.70
24h
Available quantity: 1
Available
Other products in the same category (16)
Kit for building an intelligent JetBot based on Jetson Nano. It consists of an expansion module, a camera with a LIDAR image sensor, motors, a chassis and a 9-axis IMU. Waveshare JetBot ROS AI Kit Acce
zł1,371.25
4 weeks
No product available!
Four degrees of freedom (4DOF) robotic arm assembly kit. The robotic arm was based on servos and is controlled wirelessly using a Raspberry Pi. Waveshare Robot Arm for Pi (for Europe)
zł220.87
4 weeks
No product available!
The A-Cute Car is an FPGA-based three-wheeled robotic car kit. This car can provide higher operation performance than the MCU based robotic car, because the FPGA provides more powerful computing power than the MCU. P0467
zł1,690.99
4 weeks
No product available!
Module with 5 balancing sensors for Balboa 32U4 balancing robot. Pololu 3577
zł29.32
24h
Available quantity: 2
Available
Bionic hand controlled by servos. It is made of acrylic material, allows you to control each finger separately. DFRobot ROB0143
zł999.01
4 weeks
No product available!
A modernized version of the popular Pololu 3pi mobile robot. The robot was based on the AVR ATmega32U4 microcontroller with the Arduino bootloader. Assembled version. Pololu 3738
zł1,101.00
4 weeks
No product available!
Kit for building a simple educational robot Maqueen micro:bit chassis with engines, distance sensor, battery basket and necessary assembly elements. DFRobot ROB0148
zł213.36
24h
Available quantity: 7
Available
Compact and complete robot controller, containing the ATmega328P AVR microcontroller (with 32 KB of Flash memory and 2 KB of RAM memory) and a two-channel DC motor driver. Pololu 1220
zł92.57
24h
Available quantity: 1
Available
RoArm-M3-Pro-AI-Kit is an open-source AI-grade robotic arm kit, ready for integration with Jetson Orin platforms or PCs, supporting advanced control algorithms and machine learning. With its reinforced construction and precise control, it is ideal for educational, R&D, and mobile or industrial robotics applications.
zł3,292.83
4 weeks
No product available!
An improved version of the educational robotic arm, designed for imitation learning and integration with the LeRobot and Hugging Face platforms. The kit includes servo motors, adapters and cables, offering a ready-made solution for rapid prototyping of AI systems in a real environment. Improved mechanisms and support for Nvidia Orin NX computers make it an ideal tool for research, education and reinforced learning experiments. Seeed Studio 114993667
zł1,863.75
4 weeks
No product available!
A set for building a mobile robot with Mecanum chassis based on Raspberry Pi. Equipped with Raspberry Pi Build HAT expansion module and 5 MP camera. Waveshare BuildMecar-Kit-B
zł428.51
24h
Available quantity: 1
Available
Kit for building an intelligent JetBot robot based on Jetson Nano. It consists of an expansion module, camera with Sony IMX219 image sensor, motors, housing and a set of mounting screws. Waveshare JetBot 2GB AI Kit Acce
zł418.97
24h
Available quantity: 1
Available
Available
A set of accessories for building an autonomous racing robot based on the popular NVIDIA Jetson Nano development kit. Waveshare JetRacer Pro AI Kit Acce
zł1,291.09
24h
Available quantity: 5
Available
Kit to expand the Pololu 3pi robot to Pololu m3pi with a mbed socket board. Includes non-soldered PCB as well as necessary connectors and components for self-assembly. Pololu 2152
zł108.28
24h
Available quantity: 1
Available
A multifunctional robot with a 2WD chassis and a controller in the form of a Raspberry Pi Pico board. It is a versatile mobile platform that can, for example, track a line or find and avoid obstacles. Waveshare PicoGo-Kit-EU
zł326.11
4 weeks
No product available!
A set for building an interactive robot based on a micro: bit module with a front loader. It can be programmed with tools such as Mind+, Scratch, MakeCode and MicroPython. DFRobot ROB0156-L-1