KitiBot Acce B accessory kit for building robot with micro:bit - Waveshare 14982
ID: 583770
5906623422395
zł302.58
Tax included
zł246.00 tax excl.
Multifunctional robot with 2WD chassis with a controller in the form of a micro:bit educational module. It is a universal mobile platform that can track the line and find and avoid obstacles. Waveshare KitiBot for micro:bit Acce B
Description
KitiBot is a multifunctional robot with a 2WD chassis with a controller in the form of a micro:bit educational module. It is a universal mobile platform that can track the line and find and avoid obstacles. The set can move both in autonomous mode and be remotely controlled by a mobile application and a Bluetooth interface or a 2.4 GHz radio module.
Attention!
The set does not include the micro:bit module and the 18650 battery. It must be purchased separately. Only 18650 batteries shorter than 67 mm are compatible with the set.The set consists of a complete chassis that allows the construction of a mobile robot using a 2WD system powered by two DC motors. An expansion board is attached to the housing to which the micro:bit module and battery are plugged in. In the front part of the robot there is an ultrasonic sensor mounted on the servo mechanism, thanks to which it can rotate and search for obstacles in its surroundings. On the bottom of the housing, there is a module with reflection sensors that allows the robot to carry out the line tracking function.
The central element of the robot is the KitiBot expansion module. It not only allows you to connect the micro:bit control module to the robot, but has a built-in power supply and charging system based on the MP2636 chip and Li-Ion 18650 battery. The board has a number of protections including overload, overcharge and discharge, short circuit or reverse power polarity. The DC motors are controlled by the TB6612FNG double H bridge system, and the servo movement is handled by the PCA9685 PWM controller. There is also a 10-bit ADC, buzzer and 4 RGB LEDs at the user's disposal.
| 1. micro:bit connector | 9. ADC converter TLC1543 |
| 2. MCP2636 power management | 10. LED RGB |
| 3. Circuit protection (MOSFET N 8205S) | 11. Li-Ion 18650 holder |
| 4. Li-ion battery protection | 12. Power supply switch |
| 5. Voltage regulator 3,3 V | 13. microUSB connector |
| 6. Buzzer | 14. LED indicators |
| 7. PWM Controller PCA9685 | 15. Servo and sensor connectors |
| 8. DC motor controller TB6612FNG | 16. Motor connectors |
The robot is programmed using the popular MakeCode block interface or in JavaScript. The KitiBot kit includes a dedicated set of libraries that facilitate the control of robot elements. Full documentation with assembly instructions is available on the product Wiki page.
Kit contains
- Metal housing
- KitiBot expansion module for micro:bit
- Line tracking sensor
- Ultrasonic sensor
- KitiBot acrylic plate
- Servo
- Servo mounting plate
- Ultrasonic sensor adapter
- 2 x Motor
- 2 x Wheel
- 2 x Omni-direction wheel
- PH2.0 20cm 4-pin cable
- PH2.0 20cm 7-pin cable
- USB micro B cable
- Set of screws
- 2 x Screwdriver
583770
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
18650 Li-Ion battery with a nominal voltage of 3.7V and a capacity of 3000mAh. Sony US18650VTC6
zł36.64
24h
Available quantity: 45
Available
Educational micro:bit module with 32-bit ARM Cortex-M4 microcontroller. Manufactured to interest the youngest in computer engineering. SparkFun DEV-17287
zł72.90
24h
Available quantity: 18
Available
Multifunctional robot with caterpillar chassis with a controller in the form of a micro:bit educational module. It is a universal mobile platform that can track the line and find and avoid obstacles. Waveshare KitiBot for micro:bit Acce C
zł393.88
Delivery date unknown
No product available!
Other products in the same category (16)
A small size gripper driven by a servomotor with a movement range of 32 mm. It contains a special micro servo with an additional wire that gives access to its feedback, so you can track the actual position of the gripper blades. Polol 3551
zł137.45
4 weeks
No product available!
Kit for building a simple educational robot Maqueen micro:bit chassis with engines, distance sensor, battery basket and necessary assembly elements. DFRobot ROB0148
zł213.36
24h
Available quantity: 10
Available
Minisumo robot on a tracked chassis with Pololu motors with a 100:1 HP gearbox. The robot is fully assembled and requires four additional AA batteries. Pololu 5013
zł821.55
4 weeks
No product available!
Four degrees of freedom (4DOF) robotic arm assembly kit. The robotic arm was based on servos and is controlled wirelessly using a Raspberry Pi. Waveshare Robot Arm for Pi (for Europe)
zł220.87
4 weeks
No product available!
A modernized version of the popular Pololu 3pi mobile robot. The robot was based on the AVR ATmega32U4 microcontroller with the Arduino bootloader and OLED display. Kit version. Pololu 4978
zł808.76
24h
Available quantity: 1
Available
Module with 5 balancing sensors for Balboa 32U4 balancing robot. Pololu 3577
zł29.32
24h
Available quantity: 2
Available
T-Rex walking dinosaur construction kit. The structure is based on wooden elements, it is driven by a DC motor powered by two AA 1.5 V batteries
zł19.37
24h
Available quantity: 2
Available
Replacement sprockets set for the Zumo robot in red. The kit includes two drive sprockets and two idle sprockets. The gears fit both Zumo V1.2 and Zumo 32U4 robots. Pololu 3128
zł29.19
4 weeks
No product available!
A bionic dog that is an ideal tool for learning programming and studying the movement of four-legged robots. Dedicated to work with Raspberry Pi 4B minicomputers. Waveshare WAVEGO (EU)
zł946.36
4 weeks
No product available!
A bionic dog that is an ideal tool for learning programming and studying the movement of four-legged robots. Dedicated to minicomputers Raspberry Pi 4B or ESP32 modules. Waveshare RPI WAVEGO ACCE (EU)
zł1,040.86
4 weeks
No product available!
Educational robot for learning programming based on the micro:bit module. Equipped with a blue protective case. DFRobot ROB0148-EN-LB
zł217.41
24h
Available quantity: 1
Available
Programmable self-balancing robot based on the micro:bit module. It has a built-in driving algorithm and is equipped with an ultrasonic distance sensor, an infrared sensor to avoid obstacles, an IR receiver and a color sensor. Qbit
Regular pricezł684.03zł384.47
4 weeks
No product available!
Orangutan SV-328 Robot Controller
zł271.44
24h
Available quantity: 1
Available
Robot controller dedicated to Totem sets. It is equipped with Bluetooth communication, so it can be controlled using a smartphone. TMK-X3K totem
Regular pricezł148.77zł126.84
24h
Available quantity: 2
Available
Zumo 32U4 OLED main robot control board. It is included as part of the Zumo 32U4 OLED robot kit and built into the assembled versions of the Zumo 32U4 OLED robot. Threaded elements, magnetic encoder disks and mounting elements are included. Pololu 4994
zł337.68
4 weeks
No product available!
Kit of accessories for building an autonomous racing robot based on NVIDIA Jetson Nano. Waveshare JetRacer ROS AI Kit Acce (EU)
zł1,492.24
4 weeks
No product available!
Multifunctional robot with 2WD chassis with a controller in the form of a micro:bit educational module. It is a universal mobile platform that can track the line and find and avoid obstacles. Waveshare KitiBot for micro:bit Acce B