![Segger J-Link TI-CTI-20 Adapter (8.06.06)](https://kamami.pl/87186-large_default/j-link-ti-cti-20-adapter-rohs-segger.jpg)
![Segger J-Link TI-CTI-20 Adapter (8.06.06)](https://kamami.pl/87186-large_default/j-link-ti-cti-20-adapter-rohs-segger.jpg)
zł293.98 tax excl.
J-Link TI-CTI-20 Adapter, RoHS, Segger
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
J-Link TI-CTI-20 Adapter, RoHS, Segger
J-Link TI-CTI-20 Adapter adapts from the standard J-Link 20-pin 0.1" target connector to TI CTI-20 connector.
This adapter allows to connect J-Link to eval boards with TI MCUs that are equipped with a TI CTI-20 connector, e.g. the AM335x evaluation module.
As can be seen in the image below, the key on pin 6 ensures, that the adapter can not be connected the wrong way.
The adapter is compatible to all available J-Link and J-Trace models .
Please note, that the J-Link-TI-20-CTI Adapter can only be purchased bundled with a J-Link or J-Trace.
Code: J-Link TI-CTI-20 Adapter (8.06.06)
A power adapter that provides a stabilized supply voltage to the target board (can be adjusted from 3.6V to 0.8V). Segger Target Supply Adapter (8.06.18)
No product available!
Adapter from the standard 20-pin 2.54 mm connector to the 10-pin 1.27 mm connector often used in Cortex-M boards. Segger 50-Mil 10-Pin Patch Adapter (8.06.28)
No product available!
Standard 20-pin 0.1 male connector to provide electrical isolation, Segger
No product available!
AVR PDI adapter from standard 2.54mm 20 pin connector to 2.54mm 6 pin, 1.27mm 6 pin or 2.54mm 10 pin AVR PDI connector. Segger AVR PDI Adapter (8.06.26)
No product available!
An adapter that converts a standard 20-pin 2.54 mm connector to a 10-pin 2.54 mm connector. It enables the connection of Segger programmers with Silicon Labs devices and development boards with a C2 interface. Segger SiLabs C2 Adapter (8.06.17)
No product available!
J-Link 9-pin Cortex-M Adapter, RoHS, Segger
No product available!
J-Link Needle Adapter - connect J-Link to a PCB, Segger
No product available!
Adapter providing two dedicated supply voltages - for programming and powering for the target board. Useful for programming modules that do not support low voltage programming or require a voltage other than 5V. Segger Programming Voltage Adapter (8.06.30)
No product available!
Adapter that converts standard 20-pin 2.54 mm connector to SWIM connector and 10-pin connector. Used for programming STM8 chips. Segger STM8 Adapter (8.06.22)
No product available!
Standard 20-pin 0.1 male connector to provide electrical isolation, Segger
No product available!
No product available!
An adapter to connect the JTAG to a target hardware system that has an automotive connector. It has a 20 pin 2.54mm JTAG connector and a 19 pin 1.27mm Samtec FTSH connector. Segger Infineon AUTO-20 Adapter (8.06.33)
No product available!
No product available!
SiFive-ARTY adapter for debugging between J-Link and the ARTY board with SiFive RISC-V. Segger SiFive-ARTY Adapter (8.06.24)
No product available!
Power adapter providing a stabilized 5V supply voltage for the target board. Segger 5V Target Supply Adapter (8.06.29)
No product available!
J-Link TI-CTI-20 Adapter, RoHS, Segger