TCRT5000

The LMV7219M5 is a fast analog comparator from Texas Instruments, with a response time of 7 ns and a current consumption of 1.8 mA, ideal for portable devices and low-power systems. With a wide supply voltage range (2.7 V - 5 V) and push-pull output, it facilitates direct drive of digital circuits, and the compact SOT-23-5 package facilitates integration in limited space.

The FXL2TD245L10X is a bidirectional voltage level translator from ON Semiconductor, supporting voltages from 1.1V to 3.6V, providing fast signal transfer between devices. With a propagation time of 6.5 ns and an output current of 24 mA, it is ideal for mobile and consumer applications where fast transmission and low power consumption are required.

The LDLN030G33R is a linear LDO regulator from STMicroelectronics that provides a constant voltage of 3.3V with low dropout voltage and current consumption of up to 300mA. It features low power consumption (12µA) and low noise (6.5µVrms), making it ideal for precision applications such as powering RF modules and sensors.

64 Mbit Pseudo-SRAM with SPI/QPI interface, auto refresh, burst linear and wrap modes, and configurable I/O interface (1-/4-bit) in SOP-8 package. High performance and low power consumption ideal for data caching in embedded systems and IoT devices

The 64 Mbit ESP-PSRAM64H is a high-performance SPI/QPI compatible memory module, ideal for projects requiring fast and reliable data access

The 64Mb APS6404L-3SQR-SN DRAM is a fast and power-efficient device, ideal for embedded systems, IoT applications and portable devices, operating in SDR mode with QSPI interface and frequency up to 133 MHz. It provides high performance at low power consumption, making it an optimal choice for demanding applications.

Photoresistor GL5539 with the resistance of 50 to 100 kΩ, 100 mW of power and a size of 5x2 mm. Set of 10 pieces

USB-to-UART conversion solution integrated with a 12 MHz generator eliminating the need for an external resonator and enabling COM port emulation in Windows systems. Support for hardware full duplex, speeds from 50 bps to 2 Mbps, and modem signals enables expansion of serial devices and creation of USB-to-RS232 adapters. Flexible 3.3 V or 5 V power supply suitable for embedded systems, industrial automation, IoT devices, and robotic projects where fast and stable connection between USB and UART interface is required

The Extender control chip, CH317, is a USB 3.0 controller that extends the range and functionality of the USB interface, supporting data transfer speeds of up to 5 Gbps and full compatibility with USB 2.0. Powered by 3.3 V, it is suitable for systems requiring fast, stable data transfer and is RoHS compliant.

The CH9121 enables bidirectional data transmission between UART and 10/100M Ethernet using the built-in TCP/IP stack. Two independent serial ports and a wide range of communication parameter configurations enable the integration of microcontrollers and embedded systems with IP infrastructure in industrial and IoT applications

The CH9141K enables bidirectional BLE-UART transmission in applications requiring reliable wireless communication and easy configuration via AT or BLE. The device is suitable for IoT modules, service diagnostics, wireless debugging and serial device upgrades, eliminating the need for a wired UART connection

The LM358P is a versatile operational amplifier for applications requiring low quiescent current and high stability, suitable for a wide range of analog circuits with single or dual supplies

The 4120 automotive relay socket is a 5-pin connector with 18 cm long wires and a built-in rectifier diode that protects the control system from overvoltages, increasing the reliability of the vehicle\'s electrical system

The RP2350A is a high-performance microcontroller with two Cortex-M33 or Hazard3 cores, 520 KB of SRAM, and support for up to 16 MB of external flash/PSRAM via a QSPI interface. It offers a wide range of peripherals, including USB 1.1, 24 PWM channels, 12 PIO machines, and advanced security features, making it ideal for embedded and IoT applications