

zł82.26 tax excl.
Solar energy management module dedicated to LiPo 3.7V batteries. It can work with photovoltaic cells with a voltage from 1 to 3 V. The set includes a 2 V 160 mA solar panel. DFRobot DFR0579
Solar energy management module dedicated to 3.7V LiPo batteries. It is able to charge with a maximum current of 70 mA (via the panel) or 100 mA (via the USB port). It has the MPPT (Maximum Power Point Tracking) function, maximizing the output of the solar panels under various solar conditions. Thanks to its small size and light weight, it is easy to incorporate into your designs. The module provides two outputs: direct from a 3.7 V battery or stabilized 3.3 V with a current efficiency of 90 mA. The board also has protective functions, such as protection against reverse connection and short-circuit, which significantly improves the stability and safety of the system. The board is equipped with a series of signaling LEDs to facilitate the control of the system operation.
The kit includes a solar panel with an output voltage of 2 V and a capacity of 160 mA. The kit can be used in such projects as an intelligent environmental monitoring system and IoT devices. Full documentation and configuration examples are available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Sunflower: Solar Power Manager 5V is a compact, high-power solar power module with a 5V output voltage. DFRobot DFR0559
No product available!
Solar energy management module dedicated to 12 V lead-acid batteries. It can work with solar panels with a voltage of 18 V. DFRobot DFR0580
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
Power module designed for solar systems. It is compatible with panels with an output voltage from 6 V to 24 V and is designed to charge Li-Ion 18650 batteries. Waveshare Solar Power Manager (C)
MPPT charge controller module for photovoltaic systems. It supports battery charging with 18V and 3A current, it can charge Lead Acid batteries.
Flexible, monocrystalline solar panel with an output voltage of 5 V and a current capacity of 2 A. It has dimensions of 28 x 28 x 0.18 cm. DFRobot FIT0573
Solar energy management module designed for solar panels with a voltage of 6 V to 24 V. It uses a USB Type-C connector and can supply current from a voltage of 5 V and a current of 3 A. Perfect for charging 3.7 V batteries. Comes with a basket for 3 18650 batteries. Waveshare Solar Power Manager (D) Acce A
A set of plates with dimensions of 5 x 0.2 mm. Designed for welding solar cells
Solar energy management module designed for solar panels with a voltage of 6 V to 24 V. It uses a USB Type C connector and can supply current from a voltage of 5 V and a current of 3 A. Perfect for charging 3.7 V batteries. Waveshare Solar Power Manager (D )
Charger with LCD display designed for solar panels. It can work with 12 V and 24 V systems, has a 30 A output and two 2.5 A USB outputs. Designed for lead-acid batteries
Solar energy management module designed for solar panels with a voltage from 6 V to 24 V. Waveshare Solar Power Manager (EN)
A solar cell with a power output of 0.7 W and a voltage output of 5.5 V, measuring 95 x 95 x 3 mm, equipped with pads for soldering wires. Ideal for powering small electronic devices in DIY projects.
MPPT charge controller module for photovoltaic systems. It supports battery charging with 12V and 3A current, it can charge Lead Acid batteries.
No product available!
MPPT charge controller module designed for photovoltaic systems. It can charge one lithium-polymer cell, and thanks to MTTP technology, optimal charging parameters are used for the prevailing conditions. SparkFun PRT-12885
No product available!
Solar energy management module dedicated to 12 V lead-acid batteries. It can work with solar panels with a voltage of 18 V. DFRobot DFR0580
Solar panel with an output voltage of 18 V and a power of 10 W. It consists of 36 cells (4x9) and a sturdy frame. It ensures high efficiency and stability of work. Waveshare Solar Panel (18V 10W)
Flexible solar panel with an output voltage of 1.5 V and a current efficiency of 0.26 A. It has dimensions of 175x30 mm
Photovoltaic panel allows conversion of solar radiation into electrical energy. It has 2W power and 6V output voltage, and its construction has dimensions of 136 x 110 mm. The panel is flooded with resin, which protects it against dirt and mechanical damage. Solar Panel 2W
Photovoltaic panel allows conversion of solar radiation into electrical energy. It has 1W power and 6V output voltage, and its design has dimensions of 125 x 63mm. The panel is flooded with resin, which protects it against dirt and mechanical damage. Solar Panel 1W
Solar energy management module dedicated to LiPo 3.7V batteries. It can work with photovoltaic cells with a voltage from 1 to 3 V. The set includes a 2 V 160 mA solar panel. DFRobot DFR0579