![JTAG HS3 JTAG HS3](https://kamami.pl/18778-large_default/jtag-hs3-programming-cable.jpg)
![JTAG HS3 JTAG HS3](https://kamami.pl/18778-large_default/jtag-hs3-programming-cable.jpg)
zł212.26 tax excl.
JTAG HS3 Programming Cable
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
JTAG HS3
JTAG HS3 Programming Cable, Digilent, RoHS
The JTAG HS3 is the newest member of our family of affordable high-speed Xilinx FPGA programming solutions. The HS3 builds on the successful JTAG HS1 by adding an open drain buffer to pin 14 allowing for the debugging of Xilinx Zync-SOC processors. It can be attached to target boards using Xilinx’s 2x7 connector (This is a unique programming header and is not compatible with the 1x6 MTE Digilent JTAG Connector.), and is compatible with all Xilinx tools, including iMPACT, Chipscope, and EDK.
When connected to a PC via a standard A to micro-USB cable, the JTAG HS3 receives its power from USB and can be recognized as a Digilent programming cable, even if the HS3 is not attached to the target board. The JTAG bus can be shared with other devices as the HS3s signals are held in high-impedance, except when actively driven during programming. The HS3 is small and light, allowing it to be held firmly in place by the system board connector.
NOTE: This cable is not needed for Digilent FPGA boards as our boards are designed with this functionality natively.
Key Features:
Download:
Code: 410-299P-KIT
USB compatible cable for in-circuit configuration and programming of all Xilinx devices
Advanced module with a 32-bit, single-core RISC-V processor. It has a built-in Bluetooth LE 5 and IEEE 802.15.4 (Thread, Zigbee 3.0) module. Perfect solution for IoT (Internet of Things) projects. Version with connectors for selfassembly. Waveshare ESP32-H2-DEV-KIT-N4
No product available!
Module with OLED display and real-time clock (RTC) dedicated to HC4-P kits. Odroid OLED+RTC for HC4-P
Integrated single board computer with Cyclone V SoC core. SoC SoM includes DDR3 memory, Flash memory, energy management system, common interface controllers and disc software (BSP). Terasic P0581
No product available!
Module with an absolute pressure sensor LPS25HB. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4530
Hand-shaped mini-computer based on HiFive Learn Inventor. It is based on the open RISC-V architecture as well as Wi-Fi and Bluetooth technology. SparkFun KIT-17596
No product available!
ATOM Lite development kit complete with programmable AC/DC HUB switch module. M5Stack ATOM SWITCH
Relay output module for Raspberry Pi 4B, Pi 3B+ Pi3B, Pi2, Pi+, Pi minicomputers.
Module with minicamera based on IMX219 matrix with 8 MPx operation for Nvidia Jetson Nano, with 300 mm tape. ArduCAM B0185
Adapter with 16 Grove connectors and a connector compatible with the Arduino Uno standard. Digilent 6003-410-018
No product available!
Kit with DA7280 vibration motor driver module and LRA (Linear Resonant Actuator) motor. It allows you to add vibration feedback from the device to the project. SparkFun ROB-18247
Waterproof strip with RGB LED diodes, 1 m long (30 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020108
No product available!
Extension module with ADC AD9250 converter dedicated to FPGA boards. It offers 4 input channels with a resolution of 14 bits and an ANSI/VITA 57.1 FMC connector. Numato Lab NLFMCADC001
No product available!
Module with a slide potentiometer. Depending on the position of the slider, the resistance value (maximum resistance 10kΩ) changes, which translates into the voltage value at the analog output of the module. The module has a connector in accordance with the Grove standard. Seeed studio 101020036
Module with 5-way joystick. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 111020048
No product available!
Module with an analog MQ4 methane sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0129
JTAG HS3 Programming Cable