Step-Down converter module 12V/2.8A D30V30F12
ID: 1188216
zł62.64
Tax included
zł50.93 tax excl.
DC-DC Step-Down converter module. It has an input voltage from 12 to 45 V, an output voltage of 12 V and a maximum output current of up to 2.8 A. Pololu 4896
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
DC-DC Step-Down converter module. It offers a constant output voltage of 12 V and can be powered with a voltage ranging from 12 to 45 V. It has a built-in output current limitation, and in continuous mode it has an efficiency of up to 2.8 A depending on the input voltage.
The module has an efficiency of 80% to 95%. It has a number of built-in protections, including input current limiting, undervoltage lockout and thermal shutdown.
Connections
- PG - Open drain output which goes low when the regulator output voltage increases more than 7.5% above or drops more than 9% below the nominal voltage
- VIN - input voltage
- GND - ground
- VOUT - output voltage
- EN - turning on the converter
Features
- Output voltage: 12 V with an accuracy of 4%
- Input voltage: 12 V to 45V
- Efficiency from 80% to 95%, depending on the input voltage and load
- Low Power Mode (EN Input)
- Switching frequency: 700 kHz
- No-load quiescent current 10 to 20 uA per volt
- Switching current limitation
- Output current in continuous mode from 1.5A to 3.5A
- Protections: against overheating, soft start function, overvoltage lock
- Dimensions: 17.8 x 20.3 x 9 mm
Kit contains
- Converter module
- Goldpin male straight 6-pin connector
- Goldpin male angled 5-pin connector
1188216
Data sheet
- Output voltage
- 12V
- Output current
- 2,8 A
- Converter type
- Step-down
- Supply voltage min
- 12 V
- Supply voltages max
- 45 V
You might also like
Available
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.90
24h
Available quantity: 1216
Available
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.08
24h
Available quantity: 120
Available
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
zł5.72
24h
Available quantity: 113
Available
Other products in the same category (16)
The AC-DC converter module converts the voltage in the range of 90-264V AC to 12V DC with a maximum current of 600mA and a power of 3W. It is characterized by a long life (MTBF 100,000 h), a slow start of 50 ms, and a maximum input current of 0.2A.
zł14.90
24h
Available quantity: 20
Available
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 3.3 V with an available output current of around 15 A. Pololu 2880
zł496.08
6 weeks
No product available!
The Step-Down D24V6F5 Buck Voltage Regulator module gives the output voltage of 5V with a wide input voltage range of 7-42V and a maximum output current of 600 mA. Pololu 2107
zł33.26
24h
Available quantity: 3
Available
Step-Down XL4005 converter module with adjustable output voltage in the range from 0.8 to 30 V with a wide input voltage range from 4.5 to 30 V and a maximum output current of 5 A
zł19.40
24h
Available quantity: 14
Available
The Step-Down converter module on the MP1584EN chip converts the 4.5-28V input voltage to 12V output voltage with a maximum current of 3A and an efficiency of up to 92%. It is a compact device measuring 22 x 17 x 4 mm, operating in a temperature range of -20°C to 85°C, ideal for a variety of industrial applications.
zł3.90
Delivery date unknown
No product available!
DC-DC Step-Down converter module. It has an input voltage from 7.5 to 45 V, an output voltage of 7.5 V and a maximum output current of up to 3 A. Pololu 4894
zł62.64
24h
Available quantity: 3
Available
Step-Down converter D36V28F12 with an output voltage of 12 V, an input voltage from 12.9 to 50 V and a maximum output current of 3.3 A. Pololu 3786
zł90.98
24h
Available quantity: 2
Available
Przetwornica DC-DC Step Down (MP1584), Uwe 4.5..28V, Uwy regulowane 0.8..20V, RoHS
zł5.03
24h
Available quantity: 246
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A. Typical efficiencies of 85% to 95% make this regulator well suited for high-power applications like powering motors or servos.
zł125.96
24h
Available quantity: 2
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 80% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł94.96
6 weeks
No product available!
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 9 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
zł35.13
24h
Available quantity: 2
Available
Step-down converter with adjustable output voltage 1.2V-35V and current efficiency 9A. The module allows to limit the current consumption at the output via a multi-turn potentiometer. modxl4016sd
zł17.92
6 weeks
No product available!
Step Down converter module with an output voltage of 5 V and a maximum current of 2x2,5 A. The board is equipped with four USB connectors
zł28.36
24h
Available quantity: 7
Available
The Step-Down D24V6F9 Buck Voltage Regulator module gives the output voltage of 9V with a wide input voltage range of 11.5-42V and a maximum output current of 600 mA. Pololu 2108
zł27.33
6 weeks
No product available!
The compact (0.4″ × 0.5″) D24V5F15 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 15 V while allowing for a maximum output current of 500 mA. Pololu 2847
zł28.94
24h
Available quantity: 1
Available
DC-DC Step-Down converter module. It has an input voltage from 12 to 45 V, an output voltage of 12 V and a maximum output current of up to 2.8 A. Pololu 4896