Waterproof Rotary Switch, Self-Locking, LED Illuminated, 19mm, 2 positions (white)

A large momentary button with a diameter of 60 mm with LED backlight. White color

A module with a joystick designed for M5Stack sets. Returns data from two axes and button state via the I2C interface. M5Stack U024-C

Module with a 12-channel capacitive touch sensor MPR121. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020872

TACT switch 6x6mm, h = 7mm, 2.5N, 0.05A / 12VDC, straight, black, TACT-67N   Compliance

Module with an analog joystick that returns the X and Y position and the pressed state. The module has an ATtiny85 microcontroller on the board, which processes analog data of the joystick and sends it via the I2C interface. SparkFun COM-15168

Momentary button, concave with a diameter of 33 mm and a height of 66 mm. Red color

Momentary button with a diameter of 12 mm and a height of 21 mm. Green colour

A module with eight large buttons (U, D, L, R, A, B, X, Y) and two additional (+, -), ideal as a controller for games and educational projects. It has four built-in white LEDs and two Qw/ST connectors, which allows easy connection without soldering to Raspberry Pi, Pico and other microcontrollers. It supports an I2C interface with a configurable address, allowing the simultaneous use of up to four pads. Pimoroni PIM752

The 365 Tact Switch 2 Pins Tach Switch is a compact, two-pin tactile button used in electronic devices to detect presses. It features a small size, high sensitivity, and durability, making it ideal for applications in remote controls, keyboards, and portable devices.

The MS-1A-13.5 limit switch with dimensions of 12 x 6 x 6 mm is designed to operate at a current of 1A and a voltage of 125V. The set includes 5 pieces and the operating temperature range is from -25°C to 65°C

Panel button, bistable, rectangular, dimensions 16 x 22 mm and SPDT contact configuration

2-position waterproof momentary rotary switch, 19 mm in diameter, in a stainless steel housing. Blue colour

The MS-1A-14.5-C limit switch with dimensions of 12 x 6 x 6 mm is designed to operate at a current of 1A and a voltage of 125V. The set includes 5 pieces and the operating temperature range is from -25°C to 65°C

Conductivity Sensor Switch DFRobot is a touch button that allows you to change the sensor output status by connecting terminals (positive and negative) using metal, human body or fruit and plants. It is powered by 3.3 ... 5 V. DFRobot SEN0223

Blue plastic cap for the monostable button (Tact Switch). Fits switches with dimensions 12x12x7.3 mm

The MS-1A-WB-R limit switch with dimensions of 12 x 6 x 6 mm is designed to operate at a current of 1A and a voltage of 125V. The set includes 5 pieces and the operating temperature range is from -25°C to 65°C