![TE0713-01-100-2C - a set with the Xilinx Artix-7 system TE0713-01-100-2C - a set with the Xilinx Artix-7 system](https://kamami.pl/29779-large_default/te0713-01-100-2c-a-set-with-the-xilinx-artix-7-system.jpg)
![TE0713-01-100-2C - a set with the Xilinx Artix-7 system TE0713-01-100-2C - a set with the Xilinx Artix-7 system](https://kamami.pl/29779-large_default/te0713-01-100-2c-a-set-with-the-xilinx-artix-7-system.jpg)
zł1,583.24 tax excl.
Module with Xilinx Artix-7, USB 3.0 / FIFO bridge, 1GB DDR3L SDRAM memory, 32 MB flash memory and pulse converters to ensure all voltages in the system. Everything fits on a small 4 x 5 cm tile. TE0713-01-100-2C
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Module with Xilinx Artix-7, USB 3.0 / FIFO bridge, 1GB DDR3L SDRAM memory, 32 MB flash memory and pulse converters to ensure all voltages in the system. Everything fits on a small 4 x 5 cm tile. All modules in this series are mechanically and also largely electrically compatible. You can use TEBA0841-01 , TE0703-05 , TE0706 or TE0705-04 as the base plate for this module.
Xilinx Vivado WebPACK Edition (Free license)
Base plate for Trenz Electronics 4x5 cm modules, e.g. TE0741, TE0712. The board allows connecting to the module interfaces: USB, Ethernet, JTAG. TE0705-04
No product available!
TEBA0841 is a base plate for Trenz Electronic 4 x 5 modules, e.g. TE0741 series. The FPGA input / output ports can be connected directly to the periphery via two 50 pin goldpin connectors. TEBA0841-01
No product available!
TE0706 is a base plate for Trenz Electronic 4x5cm Muduors. It allows you to connect USB, JTAG and Ethernet interfaces. TE0706-02
No product available!
No product available!
Arty S7-25 is a development kit with Xilinx FPGA XC7S25-CSGA324. The board has many peripherals: slide switches, monostable buttons, RGB LEDs etc. Digilent (410-352)
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-01-100-2C
No product available!
Base plate designed to work with TE0745 modules. TEB0745-02
No product available!
Development board FPGA PYNQ-Z1 and accessor set. Includes base plate, power supply, cables and SD card with system image for PYNQ-Z1. Digilent 240-114-1
Base plate for Trenz Electronics modules 4 x 5 cm, eg for TE0741. The board allows connecting to the module interfaces: USB, Ethernet, JTAG, UART. TE0703-06
No product available!
FPGA development board with Spartan 6 chip and 16 Mb SPI Flash memory, 8 LEDs and buttons. Numato Lab FPGA002
Development kit with Xilinx Artix 7 FPGA. Equipped with display, buttons, video outputs, Ethernet and microSD slot. Numato Lab NLFX1001
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with converter Zmod ADC 1410 and Zmod DAC 1411 plugged into the SYZYGY interface connector. Digilent 471-036
No product available!
FPGA development board with Kintex 7 FPGA system and FT2232H two-channel USB converter from FTDI. Numato Lab FPGA010A-SS
No product available!
Ready-to-use development platform designed around the Zynq-7000 All Programmable System-on-Chip (AP SoC) from Xilinx. The Zynq-7000 architecture tightly integrates a dual-core, 650 MHz ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. Digilent 410-346-20
No product available!
FPGA development board with Xilinx Artix-7 FPGA. Equipped with 24 GB of DDR3 SDRAM memory and an Edge Rate Rugged High-Speed male connector. Numato Lab NLFX1009
No product available!
A programming platform designed on the basis of the Xilinx system-on-chip system Zynq-7000 (APSoC). The Zynq-7000 architecture integrates the ARM Cortex-A9 667 MHz processor with the Xilinx 7 FPGA chip. Digilent Cora Z7-10 (410-370-1)
FPGA development board with Xilinx Kintex-7 FPGA chip with 4 GB DDR3L SDRAM memory. Equipped with a fast USB 3.1 interface. Numato Lab NLFX1004-B
No product available!
Development kit with the Xilinx Zynq XC7Z020 chip and the FT2232H dual-channel USB converter. Numato Lab FXZ001A-SS
No product available!
Evaluation kit with Zynq Ultrascale+ MPSoC, integrating the ARM Cortex-A53 platform, Cortex-R5 real-time processor, Mali-400 MP2 graphics processor and FinnFET+ programmable logic. Provides the SYZYGY interface connector. Digilent Genesys ZU-3EG (410-383-3EG)
No product available!
Module with Xilinx Artix-7, USB 3.0 / FIFO bridge, 1GB DDR3L SDRAM memory, 32 MB flash memory and pulse converters to ensure all voltages in the system. Everything fits on a small 4 x 5 cm tile. TE0713-01-100-2C