Category: RETIRED PRODUCTS

Handheld thermal imaging camera with a 3.2" LCD display. It measures the temperature in the range from -20 to 300°C with an accuracy of 2°C. HTI HT-19

Set with HQ camera, HDMI adapter, lens, tripod and Jetvariety adapter. Kit designed for NVIDIA Jetson Nano. ArduCAM B0243

LPC55S69JEV98K, ARM Cortex-M33 Microcontroller, 32 bit, 150 MHz, 640 KB Flash, VFBGA98

Camera module with a resolution of 13 MP equipped with an image sensor AR1335. The camera has a FoV 100° lens with M12 mount. ArduCAM B0245

Quad-band GSM/GPRS module operating at 850/900/1800/1900MHz frequencies. It has integrated TCP/IP, UDP, FTP, PPP network protocols. Quectel M95FA

A small tripod with 1/4" mounting screw for the Raspberry Pi HQ Camera. It has the ability to adjust the height with a rotary head. ArduCAM UB0217

Nikon F-Mount lens mount adapter for C-Mount Raspberry Pi HQ. ArduCAM UB0218

Multifunctional lens calibration kit for M12, CS-Mount, C-Mount and DSLR lenses. It allows focus calibration, FoV measurement without the need for additional calculations and focusing. ArduCAM B0226

Set with 2 DOF control platform for cameras designed for Raspberry Pi minicomputers. The platform is based on two digital servos that allow you to control the position of the camera in two dimensions. ArduCAM B0227

M12 mount lens included with adapter. Focal length 6 mm and FoV 70°. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN023

Ultra wide angle lens with M12 mount included with the adapter. 2.8 mm focal length and 130° FoV. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN032

C-Mount lens. Focal length 5 mm, FoV 60.3° (H), 47.1° (V) manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN042

Module with 9-axis IMU BMX160 sensor (accelerometer, gyroscope and magnetomet) and BMP388 pressure/temperature sensor. Communication via the I2C interface. DFRobot SEN0252

Adapter for connecting a Raspberry Pi to the OM-SE050ARD development board. It allows you to run the EdgeLock SE050 application on a Raspberry Pi. NXP OM-SE050RPI

Minicomputer Rockchip RK3328 quad-core processor and 1GB RAM. The module has two Ethernet ports, USB 2.0 port and USB type C. It is equipped with a microSD card slot. The kit includes a CNC metal case. FriendlyELEC NanoPi R2S

Vision Edge computing platform with ARM Cortex-A53 1.2 GHz 64-bit quad-core processor, ARM Cortex-R5 600 MHz dual-core processor, embedded Mali400 graphics processor and FPGA chip. MYIR VECP Starter Kit

The minicomputer with the Intel Celeron J4115 quad-core processor (2.5 GHz, 64-bit) has 2 slots for DDR4 RAM modules. Additionally, it is equipped with, among others: Gigabit Ethernet, HDMI 2.0 port and Display Port 1.2 4K/60Hz, four USB sockets, 24 GPIO, PCI-e slot, two SATA3 connectors. Rev-B+. ODROID H2+

LPCXpresso55S16 evaluation kit with LPC55S16 microcontroller with ARM Cortex-M33 core. The board contains built-in LPC-Link2, audio subsystem, accelerometer, USB interfaces and Arduino connectors. NXP LPC55S16-EVK

The MIMXRT1062DVL6A Processor Evaluation Kit, which runs up to 600 MHz, has 256 MB of SDRAM, 512 MB of Flash and 64 QSPI Flash. NXP MIMXRT1060-EVK

Starter kit with the Kinetis K32 L2B microcontroller, integrated with the OpenSDA programmer-debugger, LCD display, accelerometer and MEMS magnetometer and USB connector. Conclusions compatible with Arduino. NXP FRDM-K32L2B3