- Out-of-Stock
New products
New products New products
zł343.01
24h
Available
Available
Available
Available
Available
ArduCAM Complete High Quality Camera Bundle - Set with HQ camera, adapter, lens and tripod for Jetson Nano
ID: 580296
Set with HQ camera, HDMI adapter, lens, tripod and Jetvariety adapter. Kit designed for NVIDIA Jetson Nano. ArduCAM B0243
The set has been replaced by new version available here:
https://kamami.pl/en/cameras/580960-arducam-complete-high-quality-camera-bundle-for-jetson-nano-i-xavier-nx.html
Description
Set with HQ camera and 6 mm wide-angle lens and Jetvariety adapter. The set is designed to work with the NVIDIA Jetson Nano computer. Also includes an HDMI adapter, tripod and camera housing. The set works with all versions of Raspberry Pi minicomputers with a CSI socket. The camera is equipped with a Sony IMX477 sensor with a resolution of 12.3 MP and a built-in IR filter. The camera communicates via a 4-line MIPI CSI-2 interface.
The set supports all Raspberry Pi, Pi 4, Pi 3/3B+/3A+, CM3/3+, Pi Zero and other camera models. The package includes connection cables for connecting minicomputers to the camera.
Features
Raspberry Pi HQ camera
-
Sensor: IMX477
- Optical Format: 1/2.3″ (diagonal 7.857mm)
- Resolution: 4056(H) x 3040(V) 12.3MP
- Pixel Size: 1.55um x 1.55um
- IR Sensitivity: Visible light
- Interface: 4-lane MIPI CSI-2
- Default Lens Mount: CS-Mount
- Frame Rate: (depends on the target platform, maximum fps limit might apply)
-
Lens
- Format: 1/2.3 inch
- Focal Length: 6mm
- Aperture (F): F1.4
- Field of View (FOV): 65° (H)
- Mount: CS-Mount
- Back Focal Length: 12.5mm
- MOD: 0.1m Dimension: Φ28×26.58mm
- Weight: 29g
Kit contains
- HQ 12 MP IMX477 camera
- CS-Mount 6 mm lens
- Jetvariety adapter board
- HDMI-CSI camera adapter with 15-pin 60 mm cable
- HDMI cable 1 m
- Mini tripod
- FFC/FPC 15pin to 22pin 73mm tape
- FFC/FPC 15 pin 150 mm tape
580296
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Lens with C-mount mount and 16 mm focal length. 10MPx resolution. Designed to work with the Raspberry Pi HQ camera. Raspberry Pi PT3611614M10MP
zł245.00
24h
Available quantity: 10
Available
A small tripod with 1/4" mounting screw designed for Raspberry Pi HQ Camera. Pocket-sized and very lightweight, withstands loads up to 1kg. ArduCAM UB0216
zł45.90
Delivery date unknown
No product available!
Set of 6 lenses with M12 mount included with adapter and accessories. Designed to work with the Raspberry Pi HQ camera. ArduCAM LK003
zł489.85
Delivery date unknown
No product available!
Set of 5 lenses with CS-Mount. Designed to work with the Raspberry Pi HQ camera. ArduCAM LK004
zł705.15
24h
Available quantity: 2
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,189.00
24h
Available quantity: 8
Available
Other products in the same category (16)
Antenna with built-in LNA amplifier with high sensitivity, for mounting in a device using a GPS module. The antenna has a 25mm cable, terminated with a U.FL plug (IPEX). Dimensions of the device: 9 x 9 x 4mm
Retired
No product available!
The GY-GPS6MV1 module is a board containing the U-blox NEO-6M GPS receiver system. The tile also includes RTC backup battery, antenna connector (U.FL), voltage stabilizer and UART signal outputs
Retired
No product available!
Kit: MAXimator, MAXimator Expander, ZL32PRG - USB Blaster PRO
Retired
No product available!
Power Supply 2.5A 5.1V for Raspberry Pi 3 model B - STONTRONICS T5875DV
Retired
No product available!
MYD-JA5D44 Development Board is a complete educational platform. Its heart is the MYIR MYC-JA5D44 module, which was equipped with the Atmel SAMA5D44 processor based on Cortex-A5 cores. The processor can work at a maximum frequency of 600 MHz. Min. RS232, RS485 connectors, HDMI connector, 3.5 mm Jack Audio inputs, microSD memory card slot, 10/100 Mbps Ethernet slot and many more.
Retired
No product available!
The Raspberry Pi GPIO Triple Expansion Board converts the single GPIO headers on your Raspberry Pi into three parts. DFR0385
Retired
No product available!
Flex Cable for Raspberry Pi Camera - 300mm / 12". Adafruit 1648
Retired
No product available!
Comes with a 6"x6" (152mm x 152mm) square of Pyralux. It\'s ED-Y type copper at 35um (1 oz/ft2) and has a polymide of 25um (1 mil). The thick copper layer means it can carry a lot of current, and its trivial to solder to it. Adafruit 1894
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 50 cm - gray, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 50 cm - blue, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 1.5 m - black, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 3 m - black, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 5 m - blue, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 5 m - gray, with 2xRJ45 connectors
Retired
No product available!
The board gives the possibility to significantly extend the functionality of the STM32F407G-DISC1 development kit. The plate contains, among others memory card slot (microSD), Ethernet socket and connectors that can be used to attach SMT32F4DIS modules to the board
Delivery date unknown
No product available!
Camera board for the STM32F407G-DISC1 set. It allows you to capture an image with a resolution of 1280 x 1024 pixels (1.3MP). The set includes a flexible cable that allows the camera to be connected to the STM32F4DIS-BB expansion board
Retired
No product available!
Set with HQ camera, HDMI adapter, lens, tripod and Jetvariety adapter. Kit designed for NVIDIA Jetson Nano. ArduCAM B0243