Category: RETIRED PRODUCTS

Board with ATmega32U4 and Atheros AR9331. It combines the advantages of a microcontroller and a microprocessor with Linux. The set has 32 KB flash memory, 20 digital inputs / outputs, including the ability to configure 7 as PWM channels and 12 as analog inputs (ATmega32U4) as well as a WiFi module and a microSD card slot (Atheros AR9331). Arduino Yún Rev2

Board is a board with Atmel ATSAMW25 chip, the system has SAMD21 microcontroller (ARM, Cortex-M0+ core, 256 kB Flash, 8 KB SRAM) treated with 48 MHz clock. The ATSAMW25 chip also includes the WINC1500 Wi-Fi module. The user has at his disposal: 8 I/O lines, 12 PWM channels, 7 analog inputs. Arduino MKR1000 ABX00004

Stabilized laboratory power supply Wanptek with variable voltage regulation in the range from 0 to 30V and current in the range of 0 to 5A. Wanptek KPS305D

Development board with SAMD21 microcontroller (ARM Cortex® M0+), 8 I/O lines, 12 PWM channels, micro-USB. The board is equipped with the CMWX1ZZABZ module enabling the implementation of communication in Lo-Ra networks. Arduino MKR WAN1300 ABX00017

Development board with SAMD21 microcontroller (ARM Cortex® M0+), 8 I/O lines, 12 PWM channels, micro-USB. The board is equipped with the ATSAMD21 module and SARA-U201 U-blox enabling the implementation of communication in GSM networks. Arduino MKR GSM 1400 ABX00018

Intelligent Wi-Fi plug. It automatically controls lighting, heating and any other connected electrical appliance. Shelly Plug S

Double relay controlled by Wi-Fi with the function of roller shutter controller. It allows you to control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, radiators, air conditioners). Shelly 2.5

USB WiFi adapter for Odroid minicomputers. It has a built-in 2.4GHz and 5.8GHz Dual band antenna. Compatible with Android and Linux systems. Odroid Wifi Module 5A

Extensive signal analysis kit including the Analog Discovery 2 adapter, Analog Discovery BNC adapter, breadboards, BNC probes, cables with Minigrabber connectors and crocodile clips and necessary accessories. Digilent Ultimate Analog Discovery 2 Bundle (471-027)

Board with nRF52840 microcontroller with CortexM4F core (64 MHz, 1 MB Flash, 256 kB RAM). Equipped with BT 5.0 module and sensors - 9-axis IMU module, temperature, pressure, humidity, light, color, gestures and microphone. Module with headers. Arduino ABX00035

Stabilized laboratory power supply Wanptek with variable voltage regulation in the range from 0 to 60V and current in the range of 0 to 5A. Wanptek KPS605D

Stabilized laboratory power supply Wanptek with variable voltage regulation in the range from 0 to 30V and current in the range of 0 to 10A. Wanptek KPS3010D

Expansion board for STM32 Nucleo with NFC card reader based on the ST25R3916 chip. The board has an Arduino Uno R3 compatible connector and can be combined with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-NFC06A1

XTREME DT830B multimeter enabling constant voltage measurement in the range of 200 mV - 500 V, alternating voltage 200 - 500 V, direct current 200 μA - 5 A and resistance 200 Ω - 2 MΩ. DT830B XTREME

BGA balls with a diameter of 0.35 mm and composition Sn63 / Pb37. The ampoule contains 10,000 pieces.

BGA balls with a diameter of 0.3 mm and composition Sn63 / Pb37. The ampoule contains 10,000 pieces.

Speaker cable, two-core with a cross section of 1 mm2, black and red, PVC insulation. Price per meter. TASKER TSK53

Speaker cable, two-core, 0.75 mm2 cross section, black and red, PVC insulation. Price per meter. TASKER TSK52

Tin Sn60Pb40 with flux (100 g spool), diameter 0.38 mm. Cynel LC60-0.38/100

FPGA starter kit with Intel Stratix 10 GX. The module has integrated transceivers that transfer data at speeds up to 28.3 Gb/s, making DE10-Pro fully compatible with version 3.0 of the PCI Express standard. The DE10-Pro offers fast parallel Flash memory and four SO-DIMM slots that support DDR4 SDRAM options. Terasic P0626